• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.16-22
• /
• 2023

In this study, a salt water immersion test was performed on concrete specimens simulating the concrete mix design of the nuclear power plant, and the correlation between the amount of chloride and the XRF component according to the depth of the concrete was analyzed. The amount of chloride on the surface of the nuclear power plant concrete increased slightly with increasing immersion time in salt water, but the amount of chloride in the depth of 5.5 mm or more showed a clear tendency to increase with increasing immersion time in salt water. As a result of analyzing the correlation between the amount of chloride in concrete and the XRF component, the concrete with 20% FA substitution compared with the OPC concrete showed a very high correlation between the composition ratio of Cl ions and the evaluation result of salt damage resistance by XRF component analysis. Accordingly, it was confirmed that chlorine ion analysis and salt damage resistance performance evaluation by XRF component analysis were possible through repeated data accumulation in the nuclear power plant concrete mix with 20% fly ash replacement.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.20-28
• /
• 2013

Recently, as the registration of vehicles increases, the utilization of the waste tires is emerging as environmental issues. Crumb rubber reproduced by scrap tires has been reused up to 25% in the construction field. The purpose of this paper is to investigate the mechanical properties of sulfur-rubber concrete (SRC) and to suggest the optimum mix design in terms of the compressive strength. Specimens were prepared with various mixing parameters: amount of sulfur, rubber, and micro-fillers. Two casting processes were also mentioned; dry process and wet process. The results mainly showed that the compressive strength of SRC decreased with an increment of rubber content. However, adding micro-filler and adjusting sulfur contents could improve the compressive strength of SRC. Optimum values of sulfur and rubber content were selected by workability and compressive strength of SRC. SRC can be applied to road constructions where high strength of concrete is not concerned, to wall panels that require low unit weight, to construction of median in highways to resist high impact load, and in sound barriers to absorb sound waves.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.101-108
• /
• 1998

시멘트 대체재로 사용하는 플라이애쉬(0, 10 , 30 ,50 %)를 혼입한 콘크리트의강도발현을 관찰하기 위해 각각 21$^{\circ}C$에서 수중양생과 85$^{\circ}C$에서 증기양생방법을 채택하여 실험하였다. 수중양생한 보통 콘크리트는 플라이애쉬 혼입량이 증가할수록 조기재령에서는 낮게 강도발현을 하였으나. 28일 압축강도를 기준으로 하여 물.시멘트비를 변화한 배합비(결합재량 증가)의 실험결과는 조기강도발현이 향상되었다. 특히 플라이애쉬를 30%혼입한 콘크리트는 우수하게 강도발현을 하였다. 그리고 동일한 28일 압축강도를 갖는 배합비(결합재량 증가)에서 증기양생한 플라이애쉬콘크리트는 보통콘크리트보다 강도발현이 비슷하거나 향상되었으며, 양생온도는 플라이애쉬콘크리트의 강도발현에 많은 영향을 미치는 것으로 관찰되었다.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.6
• /
• pp.147-156
• /
• 1997

지금까지 국내에서는 콘크리트의 크리프에 관한 실험적 연구가 많이 진행되지 못하여 해당 구조물의 설계기술 도입국의 규준에 따라 크리프를 예측해왔다. 그러나 예측된 크리프 모델이 국내 콘크리트 재료의 특성에 적합한지에 대한 실험적 검증은 제대로 이루어지지 않고 있는 실정이다. 본 연구에서는 국내에서 프리스트레스 콘크리트 구조물에 적용하는 실용 고강도 콘크리트의 크리프 값을 예측하기 위해 동일한 설계기준강도를 갖는 세 가지 배합에 대하여 재령별로 크리프 시험을 수행하고 이 실험결과를 ACI, CEB/FIB, KSCE, JSCE규준들의 크리프 예측식과 비교 분석하였다.시험결과와 이들규준들에 대한 비교분석에 의하면 CEB/FIB-90 크리프 예측식은 비교적 과대 평가되고 ACI 209-92와 JSCE-96의 경우는 과소 평가되었으나 콘크리트 표준시방서 KSCE -96 크리프 예측식은 비교적 시험결과에 근접하는 것으로 평가되었다. 그러나 구성재료의 양적 변동에 '따른 배합별 시험결과의 차이를 반영할 수 있는 점이 보완되어야 할 것으로 보며 향후 많은 실험결과를 바탕으로 국내에서 생산되는 콘크리트에 대하여 보다 정확히 크리프를 예측할 수 있는 연구가 필요하다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.112-118
• /
• 2022

In this study, the diffusion characteristics were evaluated using the concrete mix design of nuclear safety-related structures. Among the concrete structures related to nuclear power safety, we selected the composition of intake and drainage structures that are immersed in seawater or located on the tidal platform and evaluated the chloride ion permeation resistance by compressive strength and electrical conductivity and the diffusion characteristics by immersion in salt water. analyzed. Compressive strength was measured on the 1st, 7th, 14th, 28th, 56th, and 91st days until the 91st day, which is the design standard strength of the nuclear power plant concrete structure, and chloride ion permeation resistance was evaluated on the 28th and 91st. After immersing the 28-day concrete specimens in salt water for 28 days, the diffusion coefficient was derived by collecting samples at different depths and analyzing the amount of chloride. As a result, it was found that after 28 days, the long-term strength enhancement effect of the nuclear power plant concrete mix with 20% fly ash replacement was higher than that of concrete using 100% ordinary Portland cement. It was also found that the nuclear power plant concrete mix has higher chloride ion permeation resistance, lower diffusion coefficient, and higher resistance to salt damage than the concrete mix using 100% ordinary Portland cement.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.4
• /
• pp.3-15
• /
• 1991

• Magazine of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.18-26
• /
• 2011

• Magazine of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.30-37
• /
• 2001

• Magazine of the Korea Concrete Institute
• /
• v.2 no.3
• /
• pp.1-6
• /
• 1990

• Magazine of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.45-54
• /
• 2001