• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.171-174
• /
• 1994

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.94-97
• /
• 2013

Orthogonal fluxgate sensor was fabricated with cylinder-shaped NiZn ferrite core, Cu wire through the core and pickup coil wound on the core, and the bias current effect on the output sensitivity of it was investigated. The output ($$\sim_\sim$$ sensitivity) of the sensor was largely dependent on the operation frequency, and the tendency of sensor output was similar to that of the impedance of pickup coil. The maximum output was obtained by adding the DC bias current of which value was over 50% of the excitation current. The output was saturated when the DC bias current was larger than 50% of the excitation current.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.332-333
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.906-907
• /
• 2011

본 논문은 3D 타원형 결함을 가진 알루미늄 판에 대하여 와전류 탐상 프로브 중 Impedance, T/R, T/T 프로브를 설계하여 결함에서의 특성을 파악하였다. 특성 파악을 위해 세 가지의 결함에 대하여 프로브 코일 임피던스의 실수, 허수 변화에 따른 와전류 센서의 특성을 비교하였다.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.31-35
• /
• 2002

스위치드 릴럭턴스 모터의 연구에서 센서리스 구동방법이나 이와 유사한 구동 방법은 스위치드 릴럭턴스 모터의 상품화 및 상용화에 있어서 소음 문제와 함께 반드시 해결해야 할 문제이다. 그러나 센서리스 구동 방법들은 초기 구동에 있어서 강제정렬 방법을 사용한 것이 일반적인데, 이것은 모터의 사용에 있어서 제한성을 가져다 준다. 본 논문에서는 탐색 코일을 이용한 스위치드 릴럭턴스 모터의 구동법과 함께 강제 정렬의 방법을 사용하지 않고 초기 기동문제를 해결하는 방법을 제안하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.383-384
• /
• 2014

본 논문에서 제시된 배전 선로용 자계 검출 센서는 비접촉형이며, 페라이트 코어로 구성되어 있다. 시편 코어의 권선수 및 길이의 변화에 따른 특성을 조사한 결과 탐색 코일의 권선수가 5,000턴이고 이격 거리가 6[cm] 이내에서 활선 여부를 검출할 수 있었으며, 전선과의 이격 거리에 대해서 자계의 세기가 제곱에 반비례로 감소하는 것을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2016

This study evaluated a digital locking device design using detection distance of 13.4mm of a human body sensing type magnetic field coil. In contrast to digital locking devices that are used nowadays, the existing serial number entering buttons, lighting, number cover, corresponding pcb, exterior case, and data delivery cables have been deleted and are only composed of control ON/OFF power switches and emergency terminals. When the magnetic field coil substrates installed inside the inner case detects the electric resistance delivered from the opposite side of the 12mm interval exterior contacting the glass body part, the corresponding induced current flows. At this time, the magnetic field coil takes the role as a sensor when coil frequency of the circular coil is transformed. The magnetic coil as a sensor detects a change in the oscillation frequency output before and after the body is detected. This is then amplified to larger than 2,000%, transformed into digital signals, and delivered to exclusive software to compare and search for embedded data. The detection time followed by the touch area of the body standard to a $12.8{\emptyset}$ magnetic field coil was 30% contrast at 0.08sec and 80% contrast at 0.03sec, in which the detection distance was 13.4mm, showing the best level.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.291-298
• /
• 2015

An array type probe for monitoring metal tubes is proposed in this paper which utilizes peak value and peak time of a pulsed eddy current(PEC) signal. The probe consists of an array of encircling coils along a tube and the outside of coils is shielded by ferrite to prevent source magnetic fields from directly affecting sensor signals since it is the magnetic fields produced by eddy currents that reflect the condition of metal tubes. The positions of both exciter and sensor coils are consecutively moved automatically so that manual scanning is not necessary. At one position of send-receive coils, peak value and peak time are extracted from a sensor PEC signal and these data are accumulated for all positions to form an array type peak value signal and an array type peak time signal. Numerical simulation was performed using the backward difference method in time and the finite element method for spatial analysis. Simulation results showed that peak value increases and the peak appears earlier as the defect depth or length increases. The proposed array signals are shown to be excellent in reflecting the defect location as well as variations of defect depth and length within the array probe.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2036-2037
• /
• 2007

반사형 펄스와전류(Pulsed Eddy Current; PEC) 탐상을 위한 여러 가지 탐촉자를 설계하고, 수치해석 방법을 사용하여 신호특성과 두께변화에 대한 만감도를 조사하였다. 구리와 페라이트를 차폐체로 사용한 결과, 구리로 차폐한 여자코일이 페라이트로 차폐한 센서코일보다 안쪽에 있는 것이 두께변화에 더 민감하였고, 페라이트만으로 차폐한 경우에도 여자코일이 안쪽에 있는 것이 더 민감하다는 것을 알 수 있었다. 한편, 두께가 두꺼워지면 펄스신호의 피크치는 감소하며 피크 발생시간이 변화하는 것을 관찰할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.868-874
• /
• 2011

In this paper, a new structure to improve the resolution of an inductive torque sensor is proposed. The new coupling structure and the change of number of turns for the receiving coil increase the resolution of the torque sensor. Because this torque sensor has non-contact points, it has no abrasion at the contact point, and is very durable. Also, the torque sensor has less variation due to vibration or strain, and it has a good EMC(Electromagnetic Compatibility) and thermal characteristics.