• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1134-1141
• /
• 1999

In this paper, we implement an optical code division multiple access(OCDMA) system and analyze the performance of the implemented system. In the implemented system, a transmitter encodes input data into optical pulses by using laser diode, and spreads the encoded pulses in an encoder which consists of 4 stage delay lines. The decoder which is the same structure as that of encoder delays and combines the spreaded pulses, and thus recovers the original data. At first, we discuss the auto- and cross-correlations of OCDMA signals under both environments of single user and multi-users, and then verify the simulation results with experimental results. We also evaluate the effect of a number of stages of delay line and code length on the system performance through computer simulations. As experimental results we can see that if the decoder have the same configuration as that of encoder, the peak auto-correlation characteristics can be achieved, and thus we can recover the original data from received data. As simulation results we can see that although bit error rate decreases as code length decreases or the number of stage of delay line increases, it is difficult to implement the system because the pulse width becomes narrow. From the results, we can apply CDMA technologies to optical communication networks.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.977-985
• /
• 2008

This paper is concerned with automatic telemetering system which reads the consumed quantity of electricity, gas, and piped water. The existing metering method such that a meterman visits households and directly reads meters can cause several problems, including violation of privacy and the possibility of criminal accident, as well the inefficiency in viewpoint of system operation and rate notification. In this paper, we propose a new automatic telemetering and rate notification system, in which the system reads several meters at remote locations and notifies the rates to the customer's cellular phone with short message service(SMS). The proposed system has been developed by using CDMA mobile communication modules and personal computers. This system can operate only with cellular communication network even without wired-internet facilities. In particular, the developed system can provide home security and convenience as well as cost reduction, and thus be applied to intelligent home networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.575-583
• /
• 2013

In ad hoc networks, a distributed timing synchronization is studied using a firefly-inspired approach. We illuminate the exiting synchronization algorithm based on the theory of pulse-coupled oscillators so that the algorithm can be applied to multi-carrier systems through packet-based communications, where nodes communicate over an orthogonal frequency-division multiple access air interface. As our main result, we introduce a new sync-code detector, which optimally designs both the coupling function and the detection threshold when various network parameters such as the number of nodes in the network and network topology are given a priori. Computer simulations are performed to show the convergence to a synchronized state in realistic network environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.17-27
• /
• 2005

In this paper, we introduce a Parallel Interference Canceller (PIC) based sorting method to improve performance in the MC-DS/CDMA environment. A conventional PIC estimates and subtracts out all of the MAI (Multiple Access Interference) for each user in parallel. The parallel process ensures the low delay for the detection of all users. Also this scheme requires more stages for having better performance. Since the performance of PIC is strongly related to the correct MAI estimation, we introduce the IC (Interference Cancellation) scheme to estimate the accurate weaker signal group than the desired signal using conventional PIC. The principle of the proposed receiver sorts in descending order by the strength of signal and subtracts the MAI of the strong interferers from the desired signal for the accurate estimate of the weaker signals. Following this, the proposed scheme cancels out the improved weaker interference from the desired signal, using the output of the pre-step. In this result, the proposed system obtains better BER performance than the conventional PIC because the accuracy of the strong signal is improved. However, a disadvantage exists in that the processing time has slightly longer delay than the PIC owing to the power sorting and the MAI estimation process. The system performance evaluates and compares other non-liner It according to the number of sub-carriers in the limited-bandwidth.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.3
• /
• pp.241-246
• /
• 2015

The interest of New Renewable Energy is increasing globally because of the increment of the uncertainty for the energy's supply and demand, and the increment of the frequency in weather anomaly and its damages. One of the New Renewable Energies, Hydrogen receives attention as the future energy that can deal with global environment regulation. Fuel Cell Electric Vehicle (FCEV) is an environment-friendly vehicle that uses Hydrogen as fuel. The electric power for FCEV is generated by chemical reaction with Oxygen from the air and Hydrogen. Hyundai Motor Company (HMC) has developed a proprietary fuel cell system since 2005. In 2012, HMC is the first car maker that mass-produces the ix35 FCEV to the worldwide such as North America, Europe, etc. In order to develop and improve the FCEV technology, data acquisition and analysis of the driving vehicle information is essential. Therefore, the monitoring system is developed, which is consist of datalogger, Automatic Vehicle Location (AVL) server and main server. Especially, WCDMA technology is integrated into the system which enables the data analysis without any restriction of time and region. The main function of the system is the analysis of the driving pattern and the component durability, and the safety monitoring. As a result, ix35 FCEV has successfully developed by using the developed monitoring system. The system is going to take an advantage of development in the future FCEV technology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.115-119
• /
• 2008

In this paper, the linearity of Doherty power amplifier has been improved by applying a new Photonic Bandgap(PBG) structure on the output of amplifier. The reposed spiral PBG structure is a two-dimensional(2-D) periodic lattice patterned on a dielectric slab that does not require nonplanar fabrication process. This structure has more broad stopband and high suppression performance than the conventional three cell PBG. Also, It has a sharp skirt property. We obtained the 3rd-order intermodulation distortion(IMD3) of -33dBc for CDMA applications with that of maintaining the constant power added efficiency(PAE), the IMD3 performance is improved as much as -8 dB compared with a Doherty power amplifier without PBG structure. Moreover, the physical length of PBG is shortened, therefore the whole amplifier circuit size is considerably reduced.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.66-75
• /
• 2000

In this paper, we present the efficient image transmission system using designed source-channel combined coder in W-CDMA mobile communication system. In proposed schemes, we decompose the wavelet transformed hierarchical band-images into some types of different size blocks which have different properties in error sensitivity. The RS(Reed-Solomon) coder with different coding rate is used for each decomposed source blocks which has different importance. In addition, we combine retransmitted error frames in Truncated Hybrid Type I ARQ. The proposed algorithm shows efficient image transmission methods because it is not much degraded in PSNR compared with the existing not combined source-channel coder in erroneous wireless channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.247-254
• /
• 2004

We introduce a new space-time signal processing scheme that uses both transmitter diversity technique and transmitter beamforming technique for code-division multiple access (CDMA) systems. Over complex Gaussian Rayleigh channel, the introduced scheme achieves the diveristy gain through the transmitter diversity technique. and the SNR gain by th transmitter beamforming technique. Bit error rate (BER) analyses are given to each of the three cases in which the transmitter diversity scheme, the transmitter beamforming scheme and the introduced scheme are used, in the slowly varying Rayleigh frequency nonselective fading channel. The Monte-Carlo simulation results are shown to match to the analytic results. When the channels between distant antennas are independent, analytic results show that the introduced scheme achieves the lowest $E_{b/}$ $N_{0}$ at target BER 10$^{-6}$ . When the channels between distant antennas are correlated, analytic and simulation results show that the introduced scheme is more robust to the change of channel correlation.n.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.9-17
• /
• 1999

In this paper, we present a mathematical modeling and perform a performance analysis of double-dwell serial search algorithm, which has a search window concept, for pilot channel in DS-CDMA(Direct Sequence Code Division Multiple Access). We derive a code detection function, a false alarm function, a code miss function, and a mean code acquisition time for the performance analysis. We calculate the mean code acquisition time of the mathematical model in IS-95 forward link and compare it with that of the conventional search methods. The performance of the code acquisition system is also evaluated to investigate the effect of dwell times and search window size. The JTC channel model, which is a PCS channel model in North America, is used for the analysis. The numerical result shows that the mean code acquisition time of the double-dwell serial search algorithm with a search window is reduced by about 17%~25% than those of the conventional ones.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.29-34
• /
• 2007

This paper presents a novel photonic bandgap (PBG) structure for size reduction and linearity improvement in power amplifier. The proposed structure is a two-dimensional (2-D) periodic lattice patterned on a dielectric slab that does not require nonplanar fabrication process. Throughout the experi-mental results, this structure has more broad stopband and high suppression performance than conventional three cell PBG and distorted uniplanar compact-PBG (DUC-PBG). This new PBG structure can be applied with power amplifier for linearity improvement. The 3rd intermodulation distortion (IMD3) of the power amplifier using new PBG structure is -36.16 dBc for (code division multiple access) CDMA applications. Compared with power amplifier without the proposed PBG structure, improved IMD3 is -13.49 dBc.