• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.51-56
• /
• 2016

시뮬레이션/측정 상관관계를 파악하려면 송신기(Tx), 리시버(Rx), 채널의 정확한 모델링이 필요하다. 또한, 표준 채널, 케이블, 픽스쳐, RF 스위치 등 실제 실험실 시나리오에서 신호에 영향을 받는 모든 것을 고려해야 한다. 연결된 각 요소가 받는 영향을 정량화하고, 모델을 이용해 시뮬레이션과 측정 작업 흐름 모두에 이 수치를 포함시키면, 설계 단계와 검증 단계 사이의 차이를 줄일 수 있어 결함을 조기에 발견하고 해결할 수 있게 된다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.622-624
• /
• 2016

교량의 케이블이나 송전선같은 원형 구조물들은 유동의 불안정성에 의해 물체 후방에 Vortex가 발생한다. 이렇게 발생한 Vortex는 구조물에 진동과 소음을 발생시키게 된다. 본 연구에서는 이러한 원형 구조물들의 배열에 따른 해석을 진행하였다. 같은 크기의 두 원형 실린더를 주 유동 방향으로 정렬시킨 배열을 EDISON 전산열유체 시스템을 이용하여 해석하였다. 두 원형 실린더의 중심의 거리를 1.5 D부터 5 D까지 변화시켜가며 거리에 따른 각 실린더의 Drag coefficient에 초점을 맞추어 연구를 진행하였다. 두 원형 실린더 사이의 거리가 감소할수록 후류 쪽에 위치한 실린더의 Drag coefficient의 값이 감소하는 양상을 보였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.268-269
• /
• 2021

본 논문에서는 RGB이미지와 Depth 이미지를 촬영할 수 있는 촬영 장비인 Azure Kinect를 사용해 다시점 촬영 시스템 구성을 위한 카메라 동기화 시스템을 제안한다. 제안한 시스템에는 8대의 Azure Kinect 카메라를 사용하고 있으며 각 카메라는 3.5-mm 오디오 케이블로 연결되어 외부동기화 신호를 전달한다. 그리고 이미지를 저장할 때 발생하는 메모리에서의 병목현상을 최소화하기 위해 촬영 시스템의 동작을 16개의 버퍼로 나누어 병렬 컴퓨팅으로 진행한다. 이후 동기화 여부에 따른 차리를 디바이스 타임스탬프를 기준으로 하여 비교한다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.66-69
• /
• 2008

This study presents deflection analysis of long span structures for pedestrian bridge on crossroads. For long span structures, the size of structural members should be determined considering the esthetic view and vehicle below the structures. As a result, the slenderness ratio of members is increased and the structure may be suffered from significant deflection. The under-tensioned system on lower part of the structure, is applied in order to reduce the deflection and the size of members. In this regard, the under-tensioned system enables the load of upper parts to carη to the end of beam by means of tensional force in cable. In addition, effectiveness of under-tensioned system can be different depending on the size of cable, the number and spacing of posts. This study is performed with conforming the effect by analytical various parameters (size of cable, number and spacing of post). Dead and live loads is supposed to apply in the slab, and the analytical result by MIDAS program are presented addressing the effect of the under-tensioned system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.572-580
• /
• 2021

In order to reduce transmission delay and increase reliability in networks, mainly high-performance and high-power network equipment is used to guarantee network quality. In this paper, we propose an optimization algorithm to minimize the energy consumed when transmitting traffic in networks with a bundle link composed of multiple physical cables. The proposed optimization algorithm is a meta-heuristic method, which uses tabu search algorithm. In addition, it is designed to minimize transmission energy by minimizing the cables on the paths of the source and destination nodes for each traffic. In the proposed optimization algorithm, performance evaluation was performed in terms of the number of cables used in the transmission and the link utilization for all traffic on networks, and the performance evaluation result confirmed the superior performance than the previously proposed method.

• Journal of Korea Entertainment Industry Association
• /
• v.5 no.1
• /
• pp.149-153
• /
• 2011

In this study, a configuration method for a cloud technology based VoD system through two different scenarios is proposed. The first scenario virtualizes DMC, content storages for each SO, and stream servers in the conventional VoD system in order to efficiently use the additionally required storage capacity and stream server. In the second scenario, it is proposed that cable broadcasting systems including VoD systems are to be changed as cloud in which the subscriber STB should have minimum programs and storage regions to connect networks, and the operating system and middle ware presented in the existing subscriber STB is moved to the cloud data center. In addition, the comparison of the application of the cloud technology for the cost of changing the existing system to STB and the cost of establishing a cloud VoD system is performed in order to analyze the cost reduction in broadcasting businesses based on the establishment of VoD systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.157-163
• /
• 2017

This system is a diagnosis system that checks whether it causes a partial discharge of a power cable or not. PD(Partial Discharge) is detected by FBDS(Frequency Band Detection Sensor). That is, it means a acoustic sensor capable of detecting each frequency band. The wave shape of PD sound is similar to noise and is systematically generated by partial discharge. Therefore, in this paper, we could discriminate between normal and abnormal case using relative level crossing rate(RLCR) and spectrogram of frequency energy rate.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1483-1484
• /
• 2011

상용 뮤-메탈, 방향성 및 무방향성 규소강판을 출발 재료로 하여 두께 0.1 mm의 차폐재 3 종류를 제조하여 전력 케이블 인근자계 차폐 효과를 조사하였다. 3상 전류일 때, 차폐재 위치의 자기장이 100 ${\mu}T$ 정도이면 뮤-메탈이(SF < 0.1) 가장 효과적이었고, 500 ${\mu}T$ 이상이면 규소강판이(SF 0.3~0.4) 더 효과적이었다. 또한, 안쪽에 방향성 규소강판, 바깥쪽에 뮤-메탈을 함께 둘러쌀 경우 500 ${\mu}T$까지도 SF를 0.1 이하로 할 수 있었다. 한편, 단상 전류에서는 고투자율 소재의 적용은 오히려 자기장을 증가시키는 결과를 보였다. 이상의 결과는 자기장 강도 H의 크기에 따라 각 소재의 투자율 우열이 서로 다른 점과 이로 인해 차폐재 내에 유도되는 자기장 벡터와 원래의 자기장 벡터의 상호 상쇄 및 중첩 작용으로 설명할 수 있었다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.490-493
• /
• 2002

There have to be a pooled procurement in order to control construction in every stage. And we need also efficient supply chains to utilize the process. Researching and developing the method, which make it possible the supply chain management by modeling for Internet-enabled pooled procurement in construction, through breakdown in materials is currently in-progress the inside and out side of country. The objective of this paper is to find a reform while modeling the production process of cable duct moreover understanding the wasting factors in each step.