• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1295-1302
• /
• 2021

As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino CNC. And after conversion to NC File, a pen was attached to each device to output a result to A4 paper. As a result, the output time was measured to be 1m 39s for PLC equipment and 2m 5s for Arduino CNC. In addition, it was confirmed that the 2D output was equally from the two equipments.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.1
• /
• pp.13-20
• /
• 2005

Bound abrasive grinding is used for the initial fabrication phase of the precision aspheric mirrors for both space and ground based astronomical telescopes. We developed a new grinding optimization process that determines the input grinding variables for the target surface roughness, checks the grinding error magnitude in resulting surface roughnesses, and minimizes the required machining time. Using the machining data collected from the previous grinding runs and subsequently fed into the multivariable regression engine, the process has the evolving controllability that suggests the optimum set of grinding variables for each target surface roughness. The process model was then used for ten grinding experiments that resulted in the grinding accuracy of $=-0.906{\pm}3.38(\sigma)\;nm(Ra)$ for the target surface roughnesses of Zerodur substrate ranging from 96.1 nm (Ra) to 65.0 nm (Ra) The results imply that the quantitative process optimization technique developed in this study minimizes the machining time and offers the nanometric surface roughness controllability superior to the traditional, qualitative, craftsman based grinding process for the astronomical optical surfaces.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.2
• /
• pp.161-170
• /
• 2008

푸쉬-풀 환기시스템은 도금조와 같이 흡인해야 할 거리가 상대적으로 긴 경우에 많이 사용되고 있다. 그러나, 창문이나 출입문을 통한 방해기류가 푸쉬-풀 환기시스템의 오염물질 제어효율을 심각하게 훼손시키고 있다고 추측하고 있으나 이에 대한 세부적인 연구가 부족한 상태에 있다. 따라서, 본 연구에서는 전산유체역학(Computational fluid dynamics)을 이용하여 푸쉬-풀 환기시스템에서의 방해기류의 방향과 세기가 흡인효율에 어떠한 영향을 미치는지에 대해 평가해 보았다. 선형흡인효율(Linear capture efficiency) 방법을 이용하여 푸쉬-풀 환기시스템에서 가상의 개방조에서 발생한 오염물질이 푸쉬-풀 시스템에 의하여 포집되지 못하고 누출되는 구역이 어딘지를 찾아낼 수 있었다. 전산유체역학 컴퓨터시뮬레이션은 AIRPAK2.1 (FLUENT CODE) 소프트웨어를 사용하였다. 푸쉬-풀 후드시스템에 방해기류가 강하게 작용하면 상대적으로 강한 와류가 발생하는데, 일반적인 난류모델인 ${\kappa}-{\varepsilon}$모델은 와류현상을 충분히 보여주지 못한 반면에 RNG 모델을 사용했을 때 실험결과를 적절히 모사해낼 수 있었다. RNG 모델을 이용하여 세가지 방향, 즉 푸쉬에서 풀 방향으로, 풀에서 푸쉬 방향으로 그리고 그에 수직되는 방향으로 방해기류가 있을 때의 푸쉬-풀 환기시스템의 흡인효율을 분석하였다. 방해기류가 0.25m/s이하일 때에는 흡인효율이 거의 떨어지지 않았으나, 방해기류가 0.6m/s에서 흡인효율이 40-70%로 떨어짐을 알 수 있었다. 따라서, 방해기류를 감소시킬 수 있는 방안에 대해서도 연구를 해야 되겠지만, 방해기류 존재 하에서 충분한 흡인 효율을 유지할 수 있는 푸쉬-풀 후드 설계기준에 대한 연구도 필요할 것으로 판단된다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.411-419
• /
• 1999

EBPP는 소비자, 사업자간에 고지서 발송, 접수 및 지불을 네트워크를 통하여 전자적으로 처리하는데 필요한 환경을 의미하며, 인터넷을 기반으로 하여 전자우편 혹은 웹 페이지를 통하여 고지서를 처리한다 EBPP 시스템은 크게 소비자, 사업자 그리고 은행간의 거래로 이루어 지지만 컴퓨터 및 인터넷의 보급의 한계 등의 문제로 현재로서 모든 고지서를 전자적으로 처리하는 것은 무리가 따른다. 그럼에도 불구하고 EBPP 시스템은 1) 경쟁력 확보를 위해 기업/금융 기관들이 인터넷을 통한 고품질 서비스 개발에 주력하는 추세이고, 2) 고객과의 보다 긴밀한 관계 유지를 위한 수단 제공하며, 3) 인터넷 등 온라인 통신 인구가 급격한 증가(2701년에 전체 인구의 약 50%가 활용할 것으로 전망)하고 있으며,4) 소비자를게 보다 편리한 지불방법 제시해주며, 5) 또 다른 마케팅 매체로 활용 가능하므로 앞으로의 전망이 매우 밝다. EBPP시스템은 크게 금융기관, 기업, 소비자 부분으로 구성되며, 소비자와 접촉 방법으로는 대표적으로 Web과 전자우편을 생각할 수 있으며, EBPP 시스템을 구축하기 위해서는 기본적으로 상접 혹은 기업에서 청구에 필요한 정보를 등록시키는 통합 청구서버(Bill consolidation server), 소비자에게 청구 가능한 정보를 갖고있는 청구 제시서버 (Bill presentment server), 소비자의 지불요청에 따라 은행으로부터 지불을 요구하는 지불서버(Payment gateway) 등이 필요하며, 이들 각각의 서버들의 구성 요소들은 제공하는 서비스에 따라 달라질 수 있다. 통합 청구서버에서 청구 제시서버로 전송되는 청구 건은 통상적으로 실시간 처리되는 것이 아니라 통합 청구서버에 존재하는 Spool DB에 저장되어 그 양이 일정한도를 넘어서면 자동 전송되도록 하여, 망의 할용도를 높이는 역할을 수행한다. 청구 제시서버의 DB에 등록된 청구 건은 인터넷을 통해 소비자에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.386-393
• /
• 1994

We have investigated output characteristics of XeCI excimer laser excited by transeverse electronbeam. We used e-beam output of 880 kV, 21 kA (70 ns, FWHM) and controlled current density of e-beam by pulsed magnetic coil (4.7 kG) which was fabricated around an e-beam diode (A-K gap is 21 mm) and laser chamber. We have obtained 35 J (4 atm) of e-beam deposition energy injected into laser media. The deposition energy was converted from an exposure area of Radcolor film and rising pressure of gas media which is measured by pressure jump method. The excited volume of $320cm^{3}$ was calculated. The maximum efficiency of 1.7% was obtained with the mixing ratio of HCllXe/Ar==0.2/ 6.3/93.5% and total pressure of 3 atm. Also laser output energy and specific energy were obtained 0.52 J and 1.7 J/I, respectively. For the analysis of experimental results we have developed computer simulation code. From the good agreements with the results of experiment and simulation we could theoretically explain the XeCI* formation channel. relaxation channel, and absorption channel of 308 nm.308 nm.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.15-21
• /
• 2019

The fourth industrial revolution is noted. It is a smarter factory. At present, research on CNC (Computerized Numeric Controller) is actively underway in the manufacturing field. Domestic CNC equipment, acoustic sensors, vibration sensors, etc. This study can improve efficiency through CNC. Collect various data such as X-axis, Y-axis, Z-axis force, moving speed. Data exploration of the characteristics of the collected data. You can use your data as Random Forest (RF), Extreme Gradient Boost (XGB), and Support Vector Machine (SVM). The result of this study is CNC equipment.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.29-35
• /
• 2023

Braille can be said to be an essential means used for the visually impaired to communicate or acquire information on visual materials in their lives. However, the rate of interpretation of braille among the visually impaired is insignificant at 5%. As a result, libraries for the visually impaired produce various types of materials that can obtain various information for the visually impaired and also have assistive technology equipment to interpret them. However, the publication rate of Braille books is too low to purchase and interpret Braille books. In addition, the Braille interpretation rate is too low, and the purchase of assistive technology devices is too expensive and slow. Therefore, in this paper, we implemented a system that displays Braille using Arduino to help visually impaired people in addition to the existing methods they use to obtain information. For Braille display, Korean data is transmitted from Python through serial communication between Python and Arduino, and Arduino, which receives the data, compares the Korean data with the data in the array in the program and retrieves the Braille values of the Korean data. Here, the Braille value was expressed by controlling the servo motor perpendicular or horizontal to the body using white and black circles based on the Braille list.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.272-279
• /
• 2002

During field survey of ground penetrating radar or borehole radar, we often encounter some problems which could be solved easily by modifying structure of the system such as antenna length, shape or array. In addition, it is necessary that the user could easily modify configuration of the radar system na test various array of antennas in order to verify and confirm numerical modeling results concerning radar antennas. We have developed network-analyzer-based, stepped-frequency georadar system. This system had been comprised with coaxial cable to confirm possibility of the system, then we have upgraded the system to use optical cable that is composed of optical/electric transducers, electric/optical transducers, amp, pre-amp and antennas. The software for the aquisition of data has been developed to control the system automatically using PC with GPIB communication and to display the obtained data graphically. We have tested the system in field survey na the results have been compared with those of RAMAC/GPR system.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.565-575
• /
• 2022

Thanks to the latest developments in digital architectural technologies, free-form designs that maximize the creativity of architects have rapidly increased. However, there are a lot of difficulties in forming various free-form curved surfaces. In panelizing to produce free forms, the methods of mesh, developable surface, tessellation and subdivision are applied. The process of applying such panelizing methods when producing free-form panels is complex, time-consuming and requires a vast amount of manpower when extracting production data. Therefore, algorithms are needed to quickly and systematically extract production data that are needed for panel production after a free-form building is designed. In this respect, the purpose of this study is to propose mathematical algorithms for the automatic generation of production data of free-form panels in consideration of the building model, performance of production equipment and pattern information. To accomplish this, mathematical algorithms were suggested upon panelizing, and production data for a CNC machine were extracted by mapping as free-form curved surfaces. The study's findings may contribute to improved productivity and reduced cost by realizing the automatic generation of data for production of free-form concrete panels.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2001

Purpose : To improve the local control of patients with nasopharyngeal cancer, we have implemented 3-D conformal radiotherapy and forward intensity modulated radiation therapy (IMRT) to used of compensating filters. Three dimension conformal radiotherapy with intensity modulation is a new modality for cancer treatments. We designed 3-D treatment planning with 3-D RTP (radiation treatment planning system) and evaluation dose distribution with tumor control probability (TCP) and normal tissue complication probability (NTCP). Material and Methods : We have developed a treatment plan consisting four intensity modulated photon fields that are delivered through the compensating tilters and block transmission for critical organs. We get a full size CT imaging including head and neck as 3 mm slices, and delineating PTV (planning target volume) and surrounding critical organs, and reconstructed 3D imaging on the computer windows. In the planning stage, the planner specifies the number of beams and their directions including non-coplanar, and the prescribed doses for the target volume and the permissible dose of normal organs and the overlap regions. We designed compensating filter according to tissue deficit and PTV volume shape also dose weighting for each field to obtain adequate dose distribution, and shielding blocks weighting for transmission. Therapeutic gains were evaluated by numerical equation of tumor control probability and normal tissue complication probability. The TCP and NTCP by DVH (dose volume histogram) were compared with the 3-D conformal radiotherapy and forward intensity modulated conformal radiotherapy by compensator and blocks weighting. Optimization for the weight distribution was peformed iteration with initial guess weight or the even weight distribution. The TCP and NTCP by DVH were compared with the 3-D conformal radiotherapy and intensitiy modulated conformal radiotherapy by compensator and blocks weighting. Results : Using a four field IMRT plan, we have customized dose distribution to conform and deliver sufficient dose to the PTV. In addition, in the overlap regions between the PTV and the normal organs (spinal cord, salivary grand, pituitary, optic nerves), the dose is kept within the tolerance of the respective organs. We evaluated to obtain sufficient TCP value and acceptable NTCP using compensating filters. Quality assurance checks show acceptable agreement between the planned and the implemented MLC(multi-leaf collimator). Conclusion : IMRT provides a powerful and efficient solution for complex planning problems where the surrounding normal tissues place severe constraints on the prescription dose. The intensity modulated fields can be efficaciously and accurately delivered using compensating filters.