• The Korean Journal of Archival Studies
• /
• no.52
• /
• pp.241-275
• /
• 2017

This study reinterprets the meaning of the record contents from the viewpoint of the record continuum to find ways to enhance the usability of records that are emphasized by the electronic record environments. In general, in academic discussions and practical examples, record contents are recognized as digital media produced by putting a high level of computer technologies and a big budget based on some records related to specific subjects. To enhance the usability of, and spread the meaning through, records, it is necessary to shift the awareness in record contents. For this purpose in Chapter 2, to grasp the meanings of the church records as well as the utilization direction, it is necessary to analyze the organization and function. Therefore, the analysis of the organization and function of the church was examined. In Chapter 3, this study attempted to find the meaning of the contents of church records in each dimension of the record continuum in relation to the mission of the church, which was identified through the organization and function analysis of the church. In Section 3, which corresponds to Dimension 4, the meaning of church record contents is diversified in society. In the end, this study suggests that the meaning and use value of records can be found in everyday life and can then be spread to society as well.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.1
• /
• pp.66-74
• /
• 2019

Excessive wear causes many complications when untreated, so that accurate diagnosis, analysis and predictive treatment plan should be made, and through evaluation of vertical dimension and stepwise treatment, a stable inter-arch relationship can be set. For the long-term success of implant treatment, ideal position and angle of implant is important, and its importance increases especially in multiple implant cases. Therefore, thorough diagnosis and planning, accurate surgery and prosthodontic procedures are significant. In this case, a 68-year-old male patient with a loss of vertical dimension due to multiple tooth loss and overall tooth wear was planned with systematic analyses from the pre-treatment stage to rehabilitate vertical dimension. Full-mouth fixed rehabilitation with computer tomography guided implant surgery was performed to the newly set vertical dimension and attained satisfactory outcomes both functionally and esthetically.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2019

This study aimed to investigate the performance of the S-detect method in breast ultrasonography and to determine how to reduce unnecessary biopsy by comparing the results of the S-detect method and biopsy. Thirty patients who had undergone breast ultrasonography between August and October 2018 and were scheduled to undergo biopsy because of the presence of breast nodules were retrospectively analyzed. The McNemar test was performed to determine whether detection of a malignant breast mass significantly differed between the S-detect method and biopsy. The following results were obtained from the analysis of the S-detect method: sensitivity, 90.9%; specificity, 84.21%; validity, 86.66%; positive predictive value, 76.92%; and negative predictive value, 94.11%. Analysis of the degree of agreement between the S-detect method and biopsy revealed a kappa value as high as 0.724 (p < 0.05), exhibiting good agreement between the two methods. The S-detect method in breast ultrasonography is diagnostically valuable in terms of distinguishing between malignant and benign breast masses, and if used properly before breast biopsy, unnecessary biopsy can be reduced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.161-170
• /
• 2019

Multi-product mass production small and medium enterprise factories have a wide variety of products and a large number of products, wasting manpower and expenses for inventory management. In addition, there is no way to check the status of inventory in real time, and it is suffering economic damage due to excess inventory and shortage of stock. There are many ways to build a real-time data collection environment, but most of them are difficult to afford for small and medium-sized companies. Therefore, smart factories of small and medium enterprises are faced with difficult reality and it is hard to find appropriate countermeasures. In this paper, we implemented the contents of extension of existing inventory management method through character extraction on label with barcode and QR code, which are widely adopted as current product management technology, and evaluated the effect. Technically, through preprocessing using OpenCV for automatic recognition and classification of stock labels and barcodes, which is a method for managing input and output of existing products through computer image processing, and OCR (Optical Character Recognition) function of Google vision API. And it is designed to recognize the barcode through Zbar. We propose a method to manage inventory by real-time image recognition through Raspberry Pi without using expensive equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.61-67
• /
• 2019

The purpose of this study is to apply self-leadership program using films to nursing students and to confirm the effects of self-leadership, empowerment, self-directed learning and happiness. The study participants were 60 nursing students, the data was collected from March 7, to June 13, 2017. The data was analyzed by frequency, percentage, mean, standard deviation, and paired t-test using SPSS WIN 24.0 computer program. The self-leadership program consisted of 13 sessions, and 14 films were used for self-management, self-training, and self-branding. The self-leadership of nursing students was significantly increased after education(t=-4.38, p<.001). In details, behavior-focused strategies, natural-reward strategies, and constructive thought pattern strategies were all significant. Empowerment also increased significantly after education(t=-5.83, p<.001), and personal skills, collective recognition, and self-determination were all significant. Self-directed learning were high after education(t=-3.31, p=.002), and learning plans and learning practices were significant. In addition, the happiness of nursing college students was significantly higher after education(t=-4.49, p<.001). As a result of this study, self-leadership program using movies can improve self-leadership, empowerment, self-directed learning and happiness of nursing students and It will be possible to apply as educational intervention in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.450-458
• /
• 2019

Passive cavitation imaging method is used to observe the ultrasonic waves generated when a group of bubbles collapses. A problem with passive cavitation imaging is a low resolution and large side lobe levels. Since ultrasound signals generated by passive cavitation take the form of a pulse, the amplitude distribution of signals received across the receive channels varies depending on the direction of incidence. Both the centroid and flatness were calculated to determine weights at imaging points in order to discriminate between the main and side lobe signals from the signal amplitude distribution of the received channel data and to reduce the side lobe levels. The centroid quantifies how the channel data are distributed across the receive channel, and the flatness measures the variance of the channel data. We applied the centroid weight and the flatness to the passive cavitation image constructed using the delay-and-sum focusing and minimum variance beamforming methods to improve the image quality. Using computer simulation and experiment, we show that the application of weighting in delay-and-sum and minimum variance beamforming reduces side lobe levels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.607-612
• /
• 2019

The softness of the crashpad part is one of the important factors which affect the interior perceived quality of the vehicle interior. And while improving the softness of the crashpad part, every effort to lower the production cost has been going on. The PU foaming process for the crashpad part depends on the understanding of a lot of processes, tools and material properties. Therefore, to achieve the requirement of the customer for the interior part's visual quality, the integrated design techniques are investigated to correlate the processes, tool design, material design and the computer aided analysis. In this paper, IMG (In Mold Grain) designed concept is firstly developed to integrate the skin preforming, plastic injection molding of the substrate and the foaming process in a tool within reduced processes. Through the application of this technology, softness of crashpad is improved by 40% compared to the conventional vacuum molding method, and the existing process is reduced by 50% by integrating the injection process and the manufacturing process. And by integrating the injection mold and the skin mold and removing the foaming mold, the number of molds are reduced from 3 to 1, resulting in 20% reduction in the cost of applying a medium-sized passenger car.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.187-193
• /
• 2019

Key-value storage engines are an essential component of growing demand in many computing environments, including social networks, online e-commerce, and cloud services. Recent key-value storage engines offer many features such as transaction, versioning, and replication. In a key-value storage engine, transaction processing provides atomicity through Write-Ahead-Logging (WAL), and a synchronous commit method for transaction processing flushes log data before the transaction completes. According to our observation, flushing log data to persistent storage is a performance bottleneck for key-value storage engines due to the significant overhead of fsync() calls despite the various optimizations of existing systems. In this article, we propose a group synchronization method to improve the performance of the key-value storage engine. We also design and implement a transaction scheduling method to perform other transactions while the system processes fsync() calls. The proposed method is an efficient way to reduce the number of frequent fsync() calls in the synchronous commit while supporting the same level of transaction provided by the existing system. We implement our scheme on the WiredTiger storage engine and our experimental results show that the proposed system improves the performance of key-value workloads over existing systems.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.1
• /
• pp.25-32
• /
• 2019

K-BEMS System was introduced to reduce peak load and to save total energy of the 200 buildings that KEPCO headquarter and branch offices use. And K-BEMS system is composed of PV, battery, and hybrid PCS. KEPCO research institute has carried out this K-BEMS research project for 3 years since January 2016. In this paper, the results of the project are shown. 9 modes of test results of K-BEMS system and are operational problems were analyzed. And measures to cure the trouble are also suggested. Batteries are operated more than 20% of SOC, and less than 20% of SOC battery protection switches are automatically shutting down the system and the system no longer respond to EMS, ending the supply of PV, and so therefore to continue the PV power supply it was turn out to be necessary that the EMS should automatically change its policy to change PV only supply mode automatically when the Battery Switch automatically operated. To operate the system continuously and automatically, it is necessary to modify the minimum operational SOC value, and in addition to that the EMS computer must remember the last shut-down SOC and Voltage which interrupted the system and add some margin to reflect the measurement error in the system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.150-159
• /
• 2019

Nowadays, dental implant is one of the widely used treatment options for edentulous patients. Recently, a method of improving the accuracy of implant surgery using an implant surgical guide has been introduced and widely used in order to accurately place the implant in a proper position. Full-guided and half-guided implant surgery can be distinguished according to the level of surgical guide application during the implant surgery. It is true that full-guided implant surgery exhibits higher accuracy, but half- guided implant surgery is often performed in a clinical situation due to the factors such as the circumstances of the operation. A partially edentulous patient who lost teeth due to tooth fracture and periodontal disease was treated using implant and fixed prosthesis. Half-guided implant surgery was performed using an implant surgical guide during implant surgery, the accuracy of implant placement was analyzed.