• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.979-982
• /
• 2003

본 논문에서는 I/O 인터페이스 제어 보드와 ISA 인터페이스 제어 보드, 그리고 레고 기반의 프로토타입을 통해 실시간 신발 공정 컨베이어 제어를 위한 원격 감시 및 제어 시스템을 구현하였다. 컨베이어를 실시간으로 제어하기 위하여 작업의 우선권을 사용자가 정할 수 있는 RTLinux를 사용하였으며, RTLinux 기반으로 디바이스 드라이브를 작성하였다. Client/server분산환경의 웹을 기반으로 실시간 시스템의 구현 및 테스트를 통해 프로토타입의 작동을 확인한다.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.101-107
• /
• 2019

This paper proposes a method for detecting faults in conveyor systems used for transportation of raw materials needed in the thermal power plant and cement industries. A small drone was designed in consideration of the difficulty in accessing the industrial site and the need to use it in wide industrial site. In order to apply the system to the embedded microprocessor, hardware and algorithms considering limited memory and execution time have been proposed. At this time, the failure determination method measures the peak frequency through the measurement, detects the continuity of the high frequency, and performs the failure diagnosis with the high frequency components of noise. The proposed system consists of experimental environment based on the data obtained from the actual thermal power plant, and it is confirmed that the proposed system is useful by conducting virtual environment experiments with the drone designed system. In the future, further research is needed to improve the drone's flight stability and to improve discrimination performance by using more intelligent methods of fault frequency.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.225-225
• /
• 2017

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.97-105
• /
• 2015

This paper is to analyze the efficiency of power consumption in logistic systems that are based on self-driving roller conveyors by the simulation technology. The improvement of the efficiency brings advantages for reducing greenhouse gas emission and logistics costs. A self-driving roller conveyor is operated only when products are loaded on itself. Thus, the self-driving roller conveyor systems consume less electric power than continuous-driving roller conveyor systems. In this paper, we design a DEVS (Discrete-Event based System) based simulation model and construct self-driving roller and continuous-driving roller conveyor models. For the verification and validation of the designed simulation system and conveyor models, we model a corresponding logistic model for the experimental environment and compare between the model and a real system. The main objective of this paper is to describe the power consumption advantage of self-driving roller conveyor based logistic systems using a simulation method.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.377-384
• /
• 1999

In this paper, client/server model for remote conveyor control and monitoring system is designed and implemented to simulate the product line of vehicles. The client system located at the monitoring office is using a web applet based system, and sends some commands to the server system which guards and controls the conveyer system directly. And server system is implemented as the web based system by using Java programming language too. The system has a distributed database system environments to manage and maintain the product line of conveyor system.

• Proceedings of the IEEK Conference
• /
• 2003.11b
• /
• pp.187-190
• /
• 2003

This thesis is dealing with conveyer remote monitoring and control system for shoes process formed by client/server, which is based on Web. Modules for watching and controlling images in a remote by client is manufactured under JAVA, and conveyer server for real-time controlling is founded on RTLinux. And device driver and APIs are developed based on it. Through both manufacturing these software and LEGO-based prototyping, it would present the real-time conveyer controlling system founded on Web to be applied to industrial spots.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.861-864
• /
• 2024

The self-driving roller conveyor system, which transports target products by controlling multiple rollers with a motor, is a logistics system suitable for branching and joining logistics and controlling the alignment of target products, and its utilization is increasing, especially in the food manufacturing process. In this paper, we build a simulation environment using Unity software based on 3D graphic modeling of a self-driving roller conveyor system. In a situation where target products are supplied irregularly in terms of time, a method is proposed that can align products to maintain constant spacing by controlling the rollers. Simulation results show that effective alignment of products is possible by controlling the motor that drives the roller based on sensor data of the product position.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.5
• /
• pp.533-549
• /
• 2024

Soil conditioning is a critical process when tunneling with an earth pressure balance (EPB) shield tunnel boring machine (TBM) to enhance performance. To determine the optimal additive injection conditions, it is important to understand the rheological properties of conditioned soil, which is typically assessed using a rheometer. However, a rheometer cannot simulate the actual process of muck discharge in a TBM. Therefore, in this study, a scaled-down model of an 8-meter-class EPB shield TBM chamber and screw conveyor, reduced by a factor of 1:20, was fabricated and its applicability was evaluated through laboratory experiments. A lab-scale model experiment was conducted on artificial sandy soil using foam and polymer as additives. The experimental results confirmed that screw torque was consistent with trends observed in previous laboratory pressurized vane shear test data, establishing a positive proportional relationship between screw torque and yield stress. The muck discharge efficiency according to foam injection ratio (FIR) showed similar values overall, but decreased slightly at 60% of FIR and when the polymer was added. In addition, the pressure distribution generated along the chamber and screw conveyor was assessed in a manner similar to the actual EPB TBM. This study demonstrates that the lab-scale screw conveyor model can be used to evaluate the shear properties and muck discharge efficiency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.415-420
• /
• 2017

In this paper, an algorithm for object counting via a conveyor system using machine vision is suggested. Object counting systems using image processing have been applied in a variety of industries for such purposes as measuring floating populations and traffic volume, etc. The methods of object counting mainly used involve template matching and machine learning for detecting and tracking. However, operational time for these methods should be short for detecting objects on quickly moving conveyor belts. To provide this characteristic, this algorithm for image processing is a region-based method. In this experiment, we counted young abalone shells that are similar in shape, size and color. We applied a characteristic conveyor system that operated in one direction. It obtained information on objects in the region of interest by comparing a second frame that continuously changed according to the information obtained with reference to objects in the first region. Objects were counted if the information between the first and second images matched. This count was exact when young shells were evenly spaced without overlap and missed objects were calculated using size information when objects moved without extra space. The proposed algorithm can be applied for various object counting controls on conveyor systems.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1412-1420
• /
• 2004

This thesis is dealing with conveyer remote monitoring and control system for shoes process formed by client/server, which is based on Web. Modules for watching and controlling images in a remote by client is manufactured under JAVA, and conveyer server for real-time controlling is founded on RTLinux. And device driver and APIs are developed based on it. Through both manufacturing these software and LEGO-based prototyping, it would present the real-time conveyer controlling system founded on Web and 3-dimensional stereo camera to be applied to industrial spots.