• Composites Research
• /
• v.27 no.4
• /
• pp.135-140
• /
• 2014

A constitutive equation, which was suggested for describing the compressive deformation behaviour of the expanded polyurethane, was applied to the expanded polypropylene under dynamic loading. This equation consists of seven parameters, five of which are obtained by fitting the stress strain curve obtained from the quasi-static compression test at the lowest base strain rate. The remaining two parameters are able to be determined by fitting the curve from the compression test at different two stage strain rates. In order to check the eligibility of the equation at high strain rate, the impact test was performed and the results were compared to the analytical constitutive equation results for the expanded polypropylene with expansion ratios of 30 and 40 times, respectively.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.834-840
• /
• 2001

Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers big power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shaped curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. This paper describes a mathematical model of profile shifted involute gear. and this model is based on Camus's theory. We draw three dimensions gear have accurate mathematical function using ADS, VisualLISP. and To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.251-257
• /
• 2007

Medical imaging zero-phase-sequence component in estimation for picture that is gotten that importance weight of digital device is increased day by day at the same time also so much important. Special quality about resolution uses Modulation Transfer Function by representative method to evaluate sharpness on important element in image quality. Get MTF converting slit, differentiating this making composition ESF edge method uses Excel by edge method in this study to be composition LSF get in fourier to informed measuring mean universally. Such method is considered that can help in principle grasping of step before make Program using C language as many as Matlab.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.311-314
• /
• 2011

최근 콘크리트 구조물의 안전성강화를 위해 탄소섬유 강화 플라스틱(CFRP) 보강 공법이 널리 사용되고 있지만 잘 알려진 바와 같이 CFRP 보강재와 콘크리트 표면사이의 부착면 탈락은 보강재 자체의 손상보다 발생할 확률이 높고 이러한 부착면 탈락은 보강의 효과를 무의미하게 만들기 때문에 구조물 전체의 파괴로 직결될 수 있다. 이에 본 연구에서는 CFRP 부착면 탈락손상을 실시간으로 검색하기 위해 압전센서를 사용하는 구조물 건전성 평가 기술을 적용하였다. 이의 검증을 위해 CFRP로 보강된 콘크리트 보를 제작하였고 3단계로 증가하는 부착면 탈락 손상을 발생시켰다. 손상 증가 단계마다 CFRP 표면에 배열된 압전센서로부터 임피던스와 유도초음파 신호를 계측하였고 손상에 따른 신호변화를 정량화하기 위해 손상지수인 RMSD를 계산하였다. 더 구체적인 부착면 탈락 손상위치 탐색을 위해서 두 가지 계측 기법으로부터 구해진 RMSD 값를 중첩시키는 Superposed RMSD 가 제안되었다. 구해진 Superposed RMSD 값을 사용하여 커브 피팅이 수행되었고 도출된 커브의 최고값에 해당하는 위치값을 찾아 실제 손상위치와 비교함으로써 제안된 기법의 가능성을 검증해 보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.804-807
• /
• 2013

최근 클라우드 컴퓨팅에 대한 관심이 고조됨에 따라, 이를 활용한 데이터베이스 아웃소싱(Outsourcing)에 대한 연구가 활발히 진행되고 있다. 그러나 아웃소싱 된 데이터베이스는 사용자 개인 정보, 증권, 또는 의료 정보 등 민감한 정보를 포함하기 때문에 서비스 제공자로부터 수행한 질의 결과 데이터가 데이터 소유자로부터 생성된 데이터이며, 정확한 질의 결과를 포함하는지 확인하기 위한 질의 결과 무결성 검증 기법의 필요성이 대두되었다. 기존 질의 결과 무결성 검증 기법은 질의 결과에 포함되는 무결성 검증 데이터의 크기가 증가하여 검증 데이터 전송 오버헤드 증가 및 데이터 노출 위험 증가 문제를 지닌다. 따라서, 본 논문에서는 데이터 보호를 지원하는 암호화 데이터 기반 질의 결과 무결성 검증 기법을 제안한다. 제안하는 질의 결과 무결성 검증 기법은 암호화된 데이터 그룹을 주기 함수를 이용하여 재분할하고, 최종 데이터 그룹 id를 힐버트 커브를 통해 변환한다. 따라서, 검증 데이터 오버헤드를 감소시켜 효율적인 질의 처리를 지원하며, 그룹 id 변경을 통해 검증 데이터 유출 위험을 방지한다. 성능평가를 통해, 제안하는 기법이 기존 기법에 비해 질의 처리 시간 측면에서 평균 2배, 검증 데이터 오버헤드 측면에서 최대 20배의 성능을 개선함을 보인다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.85-97
• /
• 2001

A mathematical model was proposed to analyze the damped motion of contact lens which is initially displaced from the equilibrium position. The model incorporates the differential equations and their numerical solution program, based on the formulations of restoring force arising from the capillary action in the tear-film layer between the lens and cornea. The model predicts the capillary action induced surface tension, time dependence of displacement of lens when it is released from the equilibrium position. It seems that the motion of lens is similar to the typical over-damped oscillation caused by the large viscous friction in the liquid layer between the cornea and lens. The effect of variables such as base curves, lens diameters and thickness of tear film layer were illustrated by the computer simulation of the derived program. The time required for the lens to return to the original position increases as the liquid layer thickness increases and it decreases as the diameter of lens increases. With the certain value of base curve the time interval is found to be minimum. The free vibrations of lenses were also simulated varying the parameters such as base curve, diameter, layer thickness. The resonant frequencies are inversely proportional to the liquid layer thickness and it increases as the lens diameter increases. The resonant frequency of lens has a maximum when the diameter is of certain value. If the external impulse or force of the same frequency as the natural frequency of contact lens acted on the cornea in vivo it may cause an excessive movement and thus it might cause the distortion 10 the lens or be pulled off the eye.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.65-73
• /
• 2008

The characterization process for the accurate color reproduction in mobile phone with camera and LCD is popular. The camera and LCD characterization, gamut mapping process is necessary to map the camera's input color stimulus, CIEXYZ value, into the LCD's output color stimulus. Each characterization is the process estimating the relation between input and output signals. In case of LCD, because of output device, the output color stimulus for the arbitrary input signal can be measured by spectro-radiometer However, in the camera, as the input device, the characterization is an inaccurate and needs the manual works in the process obtaining the output signal because the input signal can not be generated. Moreover, after gamut mapping process, the noise is increased because the optimized gamma tone curve of camera for the noise is distorted by the characterization. Thus, this paper proposed the system of obtaining the output signal of camera and the method of gamma correction for the noise. The camera's output signal is obtained by RGB values of patches from captured the color chart image. However, besides the illumination, the error for the location of the chart in the viewfinder is generated when many camera modules are captured the chart. The method of correcting the position to correct the error from manual works. The position of camera is estimated by captured image. This process and moving of camera is accomplished repeatedly, and the optimized position can be obtained. Moreover, the lightness curve of camera output is corrected partly to reduce the noise from the characterization process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.39-46
• /
• 2007

Research on human identification in ubiquitous environment has recently attracted a lot of attention. As one of those research, gait recognition is an efficient method of human identification using physical features of a walking person at a distance. In this paper, we present a human shape extraction and tracking for gait recognition using geodesic active contour models(GACMs) combined with mean shift algorithm The active contour models (ACMs) are very effective to deal with the non-rigid object because of its elastic property. However, they have the limitation that their performance is mainly dependent on the initial curve. To overcome this problem, we combine the mean shift algorithm with the traditional GACMs. The main idea is very simple. Before evolving using level set method, the initial curve in each frame is re-localized near the human region and is resized enough to include the targe region. This mechanism allows for reducing the number of iterations and for handling the large object motion. The proposed system is composed of human region detection and human shape tracking modules. In the human region detection module, the silhouette of a walking person is extracted by background subtraction and morphologic operation. Then human shape are correctly obtained by the GACMs with mean shift algorithm. In experimental results, the proposed method show that it is extracted and tracked efficiently accurate shape for gait recognition.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.198-199
• /
• 2013

본 논문에서는 리튬공기(Li-Air) 배터리를 소개하고 전기화학적 특성분석을 간단히 진행하였다. 우선, 리튬공기 배터리의 동작원리를 소개하고 기존 리튬이온(Li-Ion) 배터리와의 차이점을 제시하였다. 각 만방전압에 따른 배터리의 전기화학적 특성분석을 위해 방전용량 및 임피던스 특성커브를 분석하였다. 더불어, 향후 State-of-charge(SOC) 추정을 위한 데이터를 위해 Open-circuit voltage(OCV) 및 실제 충방전 전류 프로파일에 따른 충방전 전압을 분석하였다.

• 한국게임학회지
• /
• v.6 no.1
• /
• pp.61-63
• /
• 2009

가상환경에서 다양한 객체 요소들이 휴먼 캐릭터와 서로 상호작용을 한다. 이것은 휴먼 모션 애니메이션에 영향을 준다. 기본모션데이터는 동적, 고정된 객체의 접촉 상태, 지면과의 관계에 따라 영향을 받는다. 모션이 적절히 수정되지 않으면 불규칙, 비합리적인 표현이 생성될수 있다. 본 논문은 모션 데이터 커브를 추적하고 적절히 장애물 객체의 속성을 포함하는 관절데이터를 추적한다. 상호작용의 결과에 적절히 응답하여 데이터를 수정한다. 본 논문은 애니메이션 시나리오상에서 상호작용하는 객체를 위한 동적 제어 메커니즘을 설계하는 기법을 제시한다. 특정한 규칙을 이용하여 의사 결정할 수 있는 지능형 에이젼트에 기반한 구조로 에이젼트 시스템을 제안한다.