• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.96-101
• /
• 2008

Due to improve form accuracy and surface roughness of a aspheric lens core that is made of Ni, the study is carried out on localization about a Subminiature Optics of Proximity and Wide Field of View. The required form accuracy P-V $0.2{\mu}m$ and surface roughness is Ra 10 nm. The design of experiment(DOE) is adopted to find a optimal cutting conditions which are spindle speed, depth of cut, feedrate. Finally, the effects of this study are replacing importation and strengthening competitiveness through the localization of the Subminiature Optics of Proximity and Wide Field of View.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.435-440
• /
• 2013

In this paper, a design method of the simulation program for HILS(Hardware-In-the-Loop Simulation) system is proposed. The present method consists of definition of requirements for HILS, development of specifications, and implementation of the program to satisfy the specifications. In the implementation of the program, the application of hardware interface and the concept of structural modularization are proposed to satisfy the specifications. The concepts of CSCI(Computer Software Configuration Item) and encapsulation are used for structural modularization. The proposed method was practically applied to the development of the simulation program for the efficient operation in HILS of an anti-ship missile system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.243-244
• /
• 2022

In this paper, experiments were conducted on signal amplification of polymer capsules for application to Ground Penetrating Radar so as to enable real-time monitoring of polymer capsules inside concrete using the Morphology Dependent Resonance phenomenon. A TEM CELL and a vector network analyzer were used to analyze the difference in resonance frequency depending on the material of the sphere and the presence or absence of fracture. In order to manufacture a capsule of a size that can be measured using millimeter waves used in GPR, we manufactured a capsule with a 3D printer and analyzed the effects of the presence or absence of coating and the size of the capsule on the resonance frequency. Resonant frequency or signal amplification is more affected by diameter than coating. The capsule showing the highest amplification is the resin-coated 50 mm diameter capsule with a 316-fold increase and the lowest capsule is the uncoated 10 mm diameter capsule with a signal amplification of 11.9 times. These results demonstrate the potential of GPR to measure the position and state of self-healing capsules, which are small-sized polymers, in real time using millimeter waves.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.98-103
• /
• 2001

Machining is the commonly used process in the manufacturing of prototypes. This process offers several advantages, such as rigidity of the machine, precision of the machine, precision of the operation and specially a quick delivery. The weight and immobility of the machine support and immobilize the part during the operation. However, despite these advantages it shows, machining still presents several limitations. The immobilization, location and support of the part are referred to as fixturing or workholding and present the biggest challenge for time efficient machining. So it is important to select and design the appropriate fixturing assembly. This assembly depends on the complexity of the part and the tool paths and may require the construction of dedicated fixtures. With traditional techniques, the range of fixturable shapes is limited and the identification of suitable fixtures in a given setup involves complex reasoning. To solve this limitation and to apply the automation, this paper presents the Reference Free Part Encapsulation(RFPE) and implementation of the encapsulation system. The feature-based modeling system and the encapsulation system are implemented. The small part of which it is difficult to find out the appropriate fixturing assembly is made by this system.

• 설비공학논문집
• /
• 제26권7호
• /
• pp.301-307
• /
• 2014

This paper presents a numerical study on the constrained melting of a phase change material inside various capsule containers, using water and HDPE (High Density Polyethylene) as a PCM and a capsule material, respectively. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. Using the enthalpy method, various capsule configurations, such as a capsule from E company, an isochoric cylinder capsule, an equivalent diameter sphere capsule, and an isochoric sphere capsule, are used to investigate the effect of capsule configurations on the charging and discharging performance. A transient three-dimensional model is used for each case. The simulation results show that the capsule from E company results in a higher melting and solidification rate of the PCM, than the other capsule configurations considered in this research.

• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.64-71
• /
• 2007

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.23-32
• /
• 2016

초고속으로 비행하는 물체의 항력을 줄이기 위해 노즈콘으로부터 제트를 분사하는 다양한 연구가 진행되고 있다. 본 연구에서는 항력감소의 기초자료와 핵심 변수를 파악하기 위해서 미국의 항력감소용 분사 제트 연구 동향을 조사하고 요약하였다. 연구에 활용한 노즈콘 모델의 형상은 반구 실린더, 잘린 콘, 재돌입 캡슐이었으며, 각 모델의 시험조건에 대해 정리하였다. 항력감소의 핵심 변수는 분사제트의 마하수, 질량유량, 압력비율이다. 항력감소효과는 주어진 조건에 따라 다양한 결과를 보였지만, 최대 40~50% 정도까지 항력이 감소하였다.

• 공업화학
• /
• 제19권3호
• /
• pp.310-315
• /
• 2008

본 연구에서는 실리카 코팅을 통하여 높은 내약품성을 갖는 황연입자를 제조하였다. 합성 과정에 수중 분산도 향상을 위한 중간체 제조의 최적화와 제조된 실리카로 코팅된 황연입자의 내약품성을 조사하였다. 합성과정에서 입자 생성에 가장 영향이 높은 변수인 pH와 반응온도에 따른 입자경의 변화를 관찰하였으며, homogenizer 이용하여 변화된 입자경에 따른 실리카 코팅에의 영향, 코팅 후 온도 및 pH의 변화에 따른 입자형상의 변화를 관찰하였다. 실험 결과로, 황연안료의 합성공정에서 생성용액의 pH가 낮을수록 합성 및 숙성온도가 높을수록 작고 균일한 입자를 얻을 수 있었다. 황연입자의 코팅 전 입자경이 작을수록 실리카 코팅이 우수하였다. 또한 충분한 마이크로캡슐화에 의한 실리카 코팅은 pH 9~10 및 반응온도 $90^{\circ}C$ 이상에서 얻을 수 있었다.

• 대한화장품학회지
• /
• 제49권2호
• /
• pp.127-139
• /
• 2023

본 연구에서는 의약품 원료로 잘 알려진 minoxidil과 화장품 원료인 diaminopyrimidine oxide (DAO) 활성성분으로 사용하여 니오좀(niosome)의 물성평가와 더불어 인공피부에 대한 경피투과율을 비교하였다. 나노입자의 니오좀을 제조하기 위해 고압유화(high pressure homogenization) 방법을 이용하였으며 제타사이저(zetasizer)로 물성평가를 진행하였다. 활성성분을 포함한 니오좀의 입자크기는 HLB에 따라 평균 99 ~ 123 nm, 제타전위(zeta potential)는 -60 ~ -81 mV의 범위로 측정되었다. DSC (differential scanning colorimetry)를 통해 결정성 성분인 minoxidil이 니오좀 내에 무결정 상태로 균일하게 용해되어 있음을 확인하였다. 경피투과량을 확인 및 비교하기 위해 in vitro Franz diffusion cell 방법으로 측정하였으며, 니오좀 제형이 대조군인겔 제형보다 minoxidil의 경우 3.4배, DAO의 경우 11.1배 높은 투과율을 보였다. 또한 minoxidil과 DAO 니오좀의 경피투과 비교 시 유사한 경향을 보였으며, 상대적으로 DAO의 투과량이 많았다. HLB 값을 달리한 니오좀 제형을 Cryo-TEM을 이용하여 형상을 관찰하였으며, 모두 소포체가 형성되었으며 SUV (small unilamella vesicle)와 LUV (large unilamella vesicle)의 중간 형태임을 확인하였다. 본 연구를 통하여 탈모에 효과적인 약물인 minoxidil과 화장품 원료인 DAO 성분을 니오좀 제형에 캡슐화시킴으로써 효과적으로 피부에의 전달을 기대할 수 있다.