• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.634-638
• /
• 2001

본 연구에서는 마이크로 내시경용 바이오 센서로 응용하기 위한 Al/PZT/RuO$_2$로 이루어진 마이크로 캔틸레버를 제작하였으며, 공진 특성 및 병원체의 흡착에 따른 공진 특성 그리고 검출 감도(sensitivity)에 미치는 구조적인 영향을 전산모사를 통하여 알아보았다. 길이 100$mu extrm{m}$, 폭 50$\mu\textrm{m}$, 두께 0.3$\mu\textrm{m}$/0.25$\mu\textrm{m}$/0.7$\mu\textrm{m}$ (Al/PZT/RuO$_2$)의 크기의 제작된 마이크로 캔틸레버는 89kHz의 공진주파수를 가지고 있음을 전산모사를 통해 알 수 있었다. 바이오 센서로 응용될 때의 검출 감도는 흡착 질량의 증가에 비례하여 향상되었으며, 5% 이상의 검출 감도를 갖기 위해서는 흡착 질량이 약 5 나노그램 이상이 되어야 함을 확인할 수 있었다. 캔틸레버의 크기를 결정하는 길이, 폭, 두께중 사용 주파수 대역은 길이의 조절을 통하여 결정할 수 있고, 검출 감도의 향상을 위해서는 가능한 한 두께를 얇게 해야 함을 알 수 있었다. 반면에 폭의 변화는 공진주파수나 검출 감도에 거의 영향을 미치지 않았다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.180-186
• /
• 2017

Implant supported prostheses have improved the quality of lives of totally edentulous patients. However, there are some limitations on the number of implants related to the residual bone level or the economic concern and so on. In this situation, applying fixed detachable prosthesis with bilateral cantilevers can be considered. This clinical report describes implant supported prosthetic rehabilitation of a patient with severe bone resorption. The patient was satisfied and felt comfortable with upper complete denture and lower fixed detachable prosthesis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.169-175
• /
• 2004

In this paper, the stability of cantilever composite laminated structures with open channel section is studied. This paper deals with the buckling behavior under the variation of the geometrical shape (length ratio, crank angle in the open channel section), the fiber reinforced angle, and so on in order to offer a effective and reliable design data. Also, sensitive analyses are carried out on the stability by the interaction of design factors. Based on this fact, the proper channel section and lamination scheme of composite material cantilever structures are considered in the engineering aspect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.2
• /
• pp.174-180
• /
• 2011

Nondestructive surface imaging of elastic characteristic and mechanical property has been studied on nanoscale surface with ultrasonic AFM. Resonance frequency variation of cantilever is theoretically analyzed with respect to contact mechanics as well as experimentally measured. The contact resonance frequency is calculated theoretically using the spring-mass and Herzian model in accordance with the resonance frequency of UAFM cantilever measured experimentally. Consequently, the topography and amplitude images could be obtained successfully and the elastic characteristic at the nanoscale surface was evaluated qualitatively by amplitude signals.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.453-461
• /
• 2004

Since there are no specifications in Korea regarding the design of steel column baseplates that are subjected to concentric axial load, this paper proposes a more accessible stress design method for baseplates based on AISC specifications and guidelines.Some designs included in this paper were: (1) a full area ofconcrete bearing pressure under normal axial load and subsequent failure in external cantilevers at 0.95 d or 0.8 bf, and (2) a partial area of the pressure under a light axial load and subsequent failure as an internal cantilever model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.299-308
• /
• 2001

This paper presents the three-dimensional (3-D) study of the natural vibration of cantilevered laminated composite plates. The Ritz method is used to obtain stationary values of the associated Lagrangian functional with displacements approximated by mathematically complete polynomials satisfying the boundary conditions at the clamped edge exactly. The accuracy of the 3-D model is established through a convergence study of non-dimensional frequencies followed by a comparison of the converged 3-D solutions with analytical and experimental findings in the existing literature. A wide scope of 3-D frequency results explain the influence of a number of geometrical and material parameters for cantilevered laminated plates, namely aspect ratio (a/b), width-to-thickness ratio (a/h), orthotropy of material, number of plies (NP), fiber orientation angle(θ), and stacking sequence.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.11-18
• /
• 1992

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.5-10
• /
• 1992

• 대한치과보철학회:학술대회논문집
• /
• 1997.11a
• /
• pp.28-28
• /
• 1997

• Magazine of the Korea Concrete Institute
• /
• v.3 no.2
• /
• pp.35-45
• /
• 1991