• The KSFM Journal of Fluid Machinery
• /
• v.16 no.2
• /
• pp.21-26
• /
• 2013

Super-cavitating vehicle which is operating under water speeds up to 100m/s. In this process super-cavitation around body reduces frictional resistance. This paper introduces experimental study on different width of suction path as there is a warhead in the torpedo. Hydraulic performances of turbopump at non-cavitating condition does not display a significant differences depending on different width of suction path. However, cavitation performance of each model shows obvious differences in the same condition of experience. In case of radial inlet, the value of critical NPSH(which indicates 3% head drop) increases about 20% in comparison of axial inlet.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.93-99
• /
• 2005

Performed were 2-phase numerical studies on two types of fuel atomizers, plain orifice and pressure swirl atomizer. In case of plain orifice, cavitation model was applied so that discharge coefficient, cavitation size, and magnitude of cavitation region characterized and compared with experimental results for several different pressure enforced to the orifice. In case of swirl atomizer, VOF model was applied to analyze air core size, spray angle, and wall pressure distributions with comparison of experimental results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.605-608
• /
• 2008

In this paper, a numerical investigation of three-dimensional, two-phase flow field around a butterfly valve is conducted. The butterfly valves that have different opening angles, $10^{\circ}{\sim}90^{\circ}$, and two profiles of the shaft boss are compared with various cavitation numbers and Reynolds numbers. This paper focused on the flow analysis in the original butterfly valve and new design butterfly valve in order to decrease cavitation and loss. It is found that the butterfly valve with a cone-type shaft boss greatly reduces the cavitation and loss, compared to the original shaft boss by 20${\sim}$30%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.320-320
• /
• 2015

표면개질이란 재료 본연의 특성만으로 원하는 성능과 기능을 발휘할 수 없을 때 기재 표면에 열에너지, 응력 등을 부가하여 새로운 표면층을 형성하는 방법이다. 특히 양극산화 기술을 이용해 형성된 피막은 경도 및 내마모성 등 기계적 성질이 우수하고, 공정조건 등을 변화시켜 피막 두께와 형상 조절이 용이하여 센서, 필터, 광학용 박막 그리고 전해콘덴서 등에도 주로 사용되고 있다. 본 연구에서는 5083 알루미늄 합금을 이용해 해양환경에서 우수한 내구성을 보유할 수 있는 최적의 양극산화 공정시간을 선정하고자 캐비테이션 실험을 실시하였다. 실험 결과, 공정시간 40분에서 안정적인 산화피막 생성과 함께 탁월한 내캐비테이션 특성을 나타냈다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.41-49
• /
• 1999

A feasibility study is performed for practical application of a Ventilating Water-Jet(VWJ) propulsor which attracts new attention as a candidate propulsor for super-high speed vessels. Super-cavitating foil sections are adopted for the rotor blades since the rotor is operating at ventilating condition. Wedge type and cavitator type foil sections are used for the design of rotor blades. Other geometric characteristics of rotors are selected from the Kaplan type ducted propeller rotors. The test section of KRISO cavitation tunnel is modified to perform open-water tests of the VWJ propulsors. The tests are performed both at fully-submerged and free-jet conditions. Ventilation occurred at the free-jet condition by sucking the air in the downstream side of the rotor, which easily develops as super-cavitation when the rotor operates at lower advance coefficients. Spoilers are attached at the trailing end of the pressure side of the blade section, in order to increase the lift force.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.933-939
• /
• 2010

The purpose of this study is to investigate the generation and development of cavitation in circular and elliptical nozzles. In order to investigate the influence of cavitation, the experiment was conducted with a set of elliptical nozzles that had the same cross-sectional area, different orifice aspect ratios (a/b). Each nozzle was made of acrylic so that visualization was possible. With the injection pressure, the internal flow of the nozzle was classified into the no-cavitation, cavitation, and hydraulic-flip regions. Regardless of the nozzle geometry, with the injection pressure, the flow rate in the no-cavitation and cavitation regions increased and the discharge coefficient decreased. However, the flow rate was constant in the hydraulic-flip region. In the elliptical nozzles, the generation and development of cavitation occurred at higher cavitation number than that in the case of a circular nozzle.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.107-114
• /
• 2021

Butterfly valves are used in various industries to control the flow rate, flow direction, pressure, and temperature. These are gaining popularity in the field of plant industry to enable high-differential pressure because of their low maintenance costs and ease of installation. This study presents a numerical analysis method to analyze changes in the flow characteristics of a high-differential pressure control butterfly valve based on the location and shape of the orifice. The numerical analysis was conducted using a commercial CFD program. The analysis results show a correlation between the orifice shape and cavitation phenomenon.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.757-764
• /
• 2019

Depressurization occurs around underwater objects moving at high speeds. This causes cavitation nuclei to expand, resulting in cavitation. Cavitation is accompanied by an increase in noise and vibration at the site, particularly in the case of thrusters, and this has a detrimental ef ect on propulsion performance. Therefore, predicting cavitation is necessary. In this study, an analytical method for cavitation noise is developed and applied to an elliptic wing. First, computational fluid dynamics are performed to obtain information about the flow fields around the wing. Then, through the cavitation nuclei density function, number of cavitation nuclei is calculated using the initial radius of the nuclei and nuclei are randomly placed in the upstream with large pressure drop around the wing tip. Bubble dynamics are then applied to each nucleus using a Lagrangian approach for noise analysis and to determine cavitation behavior. Cavitation noise is identified as having the characteristics of broadband noise. Verification of analytical method is performed by comparing experimental results derived from the large cavitation tunnel at the Korea Research Institute of Ships & Ocean Engineering.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.885-890
• /
• 1998

SMART 냉각재순환펌프는 수직형 축류펌프로 분류되며 작동되는 환경의 특성상 캔드모터 펌프로 설계하였다. 냉각재순환점프의 전체 구조에 대한 개념설계를 수행하였으며 펌프의 주요부품인 회전측 집합체, 베어링 집합체, 전동기를 설계하였다. 베어링의 구조와 형상설계를 수행하였고 전동기는 농형유도 전동기로 설계하였으며 회전자의 슬롯에 대한 상세설계와 고정자의 슬롯에 대한 상세설계를 수행하였다. 앞으로 회전축의 동특성 해석, 임펠러의 캐비테이션 시험, 베어링의 내구성 시험, 펌프몸체의 응력해석을 수행할 예정이다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.29-40
• /
• 1989

A new blade section of propeller is developed to obtain higher propeller efficiency and better cavitation performance. Eleven foil sections are carefully designed and manufactured to compare the lift-drag characteristics and cavitation performances. It is expected that the developed section behaves better in the vicinity of the ship's wake, where the angle of attack variation is large, because of its wider width in lift-drag and cavitation-free bucket diagrams. A propeller design method using the selected foil section is presented. Three chordwise loading shapes are selected to investigate the influence of the lift-drag ratios on the propeller efficiencies and cavitation performances. Three propellers are designed, which correspond to the selected chordwise loading shapes. Two more propellers which use existing foil sections are designed to compare the section performance.