• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.611-616
• /
• 2018

RFID-based Smart cabinets can make a recognition error owing to the electromagnetic wave interference. This paper proposes and implements a smart cabinet system for inventory management using RFID, especially which can be applied to biological laboratories. We calculate the optimal value of partition distance for the higher recognition rate between RFID tags and the reader, and the optimal partition thickness for electromagnetic wave absorption to achieve the higher recognition rate, in which two kinds of the partitions have been tested, a pure steel partition with various thickness and a thin steel partition attached with electromagnetic waves absorber. The experimental results show that the most recommended partition structure for the smart cabinets is one with the partition distance of 30cm and the partition thickness of 1mm attached with the electromagnetic wave absorption tapes.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.197-199
• /
• 2005

원전계측제어시스템개발사업단(KNICS)에서 개발중인 원자로보호계통 캐비닛의 인간공학적 평가를 수행하였는데, 본 논문에서는 이에 대한 평가계획, 평가절차, 그리고 평가결과를 기술한다. 평가에는 기존의 시스템 경험이 있는 발전소계측제어요원과 인간공학 전문가 그룹이 참여하였는데, 새로 개발하는 시스템에 대한 교육 및 훈련이 평가전에 시행되었다. 평가는 운전성을 평가하기 위한 수행도 평가실험과 참여자의 주관적인 의견을 수집하기 위한 설문지 작성으로 구성하였는데, 평가실험을 위한 7개의 실험시나리오를 작성하여 실험설비에 구현하였다. 설문지는 기존 시스템의 운용중 발생하였던 문제점 및 장단점을 평가하기 위한 설문지, KNICS 보호계통 캐비닛의 활용후 개선점을 도출하기 위한 설문지, 그리고 기능적인 측면에서 운용전문가의 의견을 요구하는 설문지 둥의 3종류의 설문지로 구성하였다. 평가실험은 시나리오 운용순서에 따라 진행되었고, 모든 실험시나리오 실행과정은 비디오를 사용하여 기록하였다. 실험평가 데이터의 분석결과 KNICS 원자로보호계통은 유지보수 측면에서 기존의 시스템보다 우수한 것으로 평가되었으며, 화면설계 및 기기설계시 반영하여야 할 개선사항이 도출되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.263-268
• /
• 2010

This paper shows the key management system in a small metallic cabinet using a small UHF RFID tags. Each key chain with a key has a custom-designed small RFID tag antenna. There are 6 metallic racks in the small cabinet, and each rack can hold 60 key chains. Therefore, the small cabinet can hold 360 key chains with tags. The 360 key chains with RFID tags in a cabinet are recognized by RFID key chain management system. Even though it is hard to recognize 360 tags in the a cabinet, this RFID key management system with small custom designed RFID tags can recognize all the tags in the small cabinet. To read the all the tags, the locations of antennas and tag shapes are optimized. The reading rates based on the bios-version of the reader and the locations of the reader antennas are compared.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.31-37
• /
• 2003

This paper presents the methodologies for seismic retrofitting of cabinet equipment which can be employed to resolve the USI A-46 problem related to seismic qualification of old nuclear power plant. To obtain accurate dynamic characteristics of a cabinet structure, three types of structural modeling are introduced and the their free vibration modes are compared. Three types of seismic retrofitting scenarios, such as 1) the installation of bracing, 2) installation of damper, 3) installation of tuned mass damper(TMD), are established and evaluated for the decrease of ICRS(In Cabinet Reponse Spectrum). In the cases of 1) ＆ 2), since the retrofitted structures show larger ICRS than that of the original structure, the careful considerations are need in the application of these methods. Though the installation of TMD shows the best retrofitting result, the construction of analysis model that indicate the accurate vibration modes of real structure is estimated the essential step of this retrofitting method.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.53-61
• /
• 2019

The seismic capacity of electric cabinets in Nuclear Power Plants (NPPs) should be qualified before installation and be maintained during operation. However it can happen that identical devices cannnot be produced for replacement of devices mounted in electric cabinets. In case of when no In-Cabinet Response Spectrum (ICRS) is available for new devices, ICRS can be generated by using Finite Element Analysis (FEA). In this study we investigate structural response and ICRSs of battery charger which is supplied to NPPs. Test results on the battery charger are utilized in this study. The response is measured by accelerometers installed on the housing of the battery charger and local panels in the battery charger. Numerical analysis model is established based on resonant frequency search test results and validated by comparison with 2 types of earthquake testing results. ICRSs produced from the numerical model are compared with measured ICRSs in the seismic tests. Developed analysis model is a simple reduced model and anticipates ICRSs quite well as measured response in the tests overall despite of its structural limitation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.465-473
• /
• 2018

A cabinet-door integrated finite element model for a built-in side-by-side refrigerator with an ice dispenser and home bar was constructed, and its deformation was analyzed by ANSYS. As loads, the food load in the shelf and baskets, and thermal load occurring during the normal operation condition were considered. From results of the analyses, the door height difference (DHD) and door flatness difference (DFD) between the two doors, and the increase in the gap of the door gasket, which affects the sealing of cool air in the cabinet, were derived. As results of an evaluation of the differences, the DHD and DFD under the assembled condition satisfied the acceptance criteria of the manufacturer. The food and thermal loads increased the DHD and DFD due to thermal deformation, and the DFD increased significantly. In addition, the increase in the gap of door gasket located between the cabinet and doors was derived from the results of displacements under the food and thermal loads. The evaluation showed that the maximum increase in gap appeared at the left edge of the freezing compartment gasket, which satisfied the acceptance criteria of the manufacturer.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.11a
• /
• pp.147-163
• /
• 2002

• The Korean Journal of Archival Studies
• /
• no.56
• /
• pp.213-216
• /
• 2018

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.9
• /
• pp.731-737
• /
• 2016

In the quest for improved capacity and accelerated dehydration speed of drum type washing machines, an increase in vibration emerges as a major challenge. In an attempt to derive a new design with reduced vibration, a full finite element model of washing machine has been developed, with experimental verification. After modal analyses of several design variants, a new design of the cabinet has been proposed. Forced vibration analysis of the new model suggests that 19% reduction in cabinet vibration amplitude can be achieved with this design.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1386-1388
• /
• 2011

오늘날 컴퓨터 및 통신 기술의 급속한 발달로 인해 디지털 시대가 도래 하면서 전자 서비스가 보급 되었지만 전자 출력물들은 프린터로 출력하여 문서 창고 안에 보관되어 문서의 진위 여부 확인이나 법적인 문제가 발생시에 종이 문서 창고에 의지할 수 밖에 없었다. 이렇게 창고 안에 보관하는 것도 문서의 양이 비약적으로 많아져 운영하는데 막대한 비용이 발생되고 있다. 한편 기존 문서를 전자문서로 변환하면서 데이터 누락되거나 데이터가 변질되거나 유실되는 문제가 빈번하게 발생되었다. 본 논문에서는 기존 문서를 전자 문서로 변환하고, 이후 문서 수정이 발생할 때에는 버전 관리를 통해 안정성을 높인 워터마크와 OCR 기술을 적용한 전자 캐비닛 시스템을 설계 구현한다.