• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.319-323
• /
• 2009

최근 대체수자원 개발, 도시 비점오염과 물순환 체계의 효율적 관리를 위한 분산식 빗물관리기술에 대한관심이 급증하고 있다. 이수 목적의 빗물이용시설, 치수목적의 우수유출 저감시설, 택지개발사업의 재해저감시설 등 다양한 목적으로 시설들이 도입되고 있다. 그러나 치수용 시설에 있어 설계강우에 따른 홍수량 산정방법을 제외하고는 이수 및 물순환 건전화를 위한 계획, 설계기술은 현재까지도 부족한 실정이다. 특히 이수목적의 경우 집수면의 토지이용 특성, 용도별 사용수량 및 경제성에 대한 검토 없이 집수면적이나 대지면적의 일정비율 이상을 설계하고 있는 실정이다. 본 연구에서는 국내에서의 빗물관리시설 계획 설계를 지원하기 위해 공동주택 빗물관리 의사결정지원 모형(RainCity v1.5 Beta)을 개발하였다. 강우자료는 5분 간격의 설계강우, 시우량 및 일 강우자료를 DB나 사용자 파일로부터 호출하도록 하였으며, 토지이용 특성에 따라 유출계수를 고려한 수문학적 집수면적을 산정하여 적용하였다. 현재 버전은 이수 및 치수용 저류조, 침투통, 침투트렌치, 침투블럭 등 장치형 침투시설과 투수성포장 등 지표면 침투시설을 대상으로 하였으며, 각 시설조합의 설치에 따른 유입/유출량, 침투량 및 사용수량 등 물순환 과정을 모의할 수 있다. 특히 선택된 시설조합은 규모 시나리오에 따라 목표 기능에 맞는 시설규모들을 선정하고, 비용-편익분석을 통해 경제적인 시설규모를 결정할 수 있다. 향후 지속적으로 GUI를 개선하여 사용자 편의도를 높이고, 식생형 침투도랑, 생태연못, 중수이용시설과의 연계 등 기능을 확대할 계획이므로 국내에서의 빗물관리시설의 계획 설계 시 활용도가 높을 것으로 기대된다.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.47-54
• /
• 2004

The performance of road-pavement system is closely related to the constituent materials and their susceptibility to mechanical as well as physicochemical stresses. However, the influence of physical and chemical effects on the road-pavement system due to pollution intrusion has not been investigated fully. To study this topic, thu.;, the interaction of a road-pavement system with pollution sources and environments are identified and discussed preliminarily in this paper. Pollution intrusion to road-pavement system occurs by three basic mechanisms; 1) direct intrusion into pavement surface, 2) intrusion from the Right of way, and 3) physical-chemical-biological alterations. Pollution intrusion potential is closely related to material type, particle size, and climatological and topographical features. Stability and performance of road-pavement system is also directly affected by pollution intrusion. Based on these features, thus, engineers working in related to the road design, construction, and maintenance should be seriously considered this topic.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.79-87
• /
• 2011

In this study, the chloride penetration tests were performed for the initially cracked reinforced concrete members. The chloride diffusion characteristics and the critical crack width are compared, and the properties of self-healing are investigated. According to the test results, the chloride penetration resistance was greatly reduced as the surface crack width increased. When the mineral admixtures are added, the chloride penetration resistance of uncracked specimens were effectively increased, however, in case of the blast furnace slag and fly ash, the cracked specimens showed the more reduced resistance than OPC case, inversely. Also, the critical width was $29{\mu}m$, on average, for immersion test. The crack width with $4{\sim}15{\mu}m$ was restored by self-healing, The parts restored by self-healing were seemed to be visually restored, however, the chloride penetration resistance was not restored, perfectly.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.399-402
• /
• 2000

Very little information is known on the canning of fishery products by vacuum pack. In this paper, some fundamental process conditions for the canning of fishery products were investigated. Moisture-controlled mackerel pike, shrimp and oyster were packed in lacquered cans with spice and additives. After sealing, pressure of the cans were reduced by do-aeration through specially designed gas-tight silicone rubber plug previously attacked to the lid. On this investigation, vacuum can prior to thermal processing were set up to 15, 30, 45 and 60 cmHg, The higher vacuum in cans showed the more quick heat transfer in thermal processing. tinder 60 cmHg vacuum, the heat transfer was more quick than that of the conventional water packed products, Under 15 cmHg, however, the heat transfer was markedly increased by air which acted as an insulator in conductive heat transfer. These results demonstrated that high vacuum was essential secure for the heat processing in vacuum pack.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.8
• /
• pp.63-72
• /
• 2005

Rocks are dumped to soft marine ground in order to improve trafficability and construction conditions in the tideland reclamation construction sites. Though this rock layer under earth fill has caused in a serious seepage problems after construction, seepage behaviors of this embankment structure is not correctly investigated. Water flow through rock layers is, in general, known as Non-Darcy's flow. However, the embedded rock layer under earth fill is not known whether its flow is governed by Darcy's or Non-Darcy's law. Therefore, a numerical analysis, laboratory model test and filed investigations were performed for analyzing the those seepage characteristics in this research. Results show that there is significance of $95\%$ of confidence between observed heads and seepage rates, and the calculated ones by SAMTLE which is developed under the assumption that the water flows through the two-layer system obey the Darcy's flow. And after operating the hydraulic gradient(i) of $0.10\~0.55$ upon laboratory model, these seepage characteristics of the embedded rock layer show that Reynolds Numbers are less than 10 and the relationship between these velocities of rock layer(v) and hydraulic gradients(i) is linearly proportional with more than 0.79 of the coefficient of correlation $(R^2)$. And the Reynolds Number of the velocity calculated by the relation of v=ki in the embedded rock layer of OO sea dike is $1\~6$. It shows also laminar flow. Based on these results, it is concluded that the seepage characteristics of embedded rock layer under earth fill can be laminar and Darcy's flow.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.567-576
• /
• 2008

It is possible to understand rainfall infiltration characteristics by identification of wetting front in the soil. The wetting front by rainfall infiltration has close relationships among soil density, grain size distribution, and permeability coefficient in the soil. The infiltration velocity is a similar concept of permeability coefficient in the soil. In this study, infiltration velocity of rainfall was calculated by a field monitoring of volumetric water contents at the depths of 50 cm and 80 cm below the surface in the gneiss weathered soil. The calculated field infiltration velocity was compared with a permeability coefficient by a laboratory soil test using undisturbed soil samples in the study area. The permeability coefficient of the soil sample is $3.15{\times}10^{-3}cm/sec$, while the field infiltration velocity is $1.87{\times}10^{-3}cm/sec$. It is interpreted that the lower infiltration velocity is induced by complicate condition of porosity and grain size distribution of soil in the field. The rainfall intensity which influences on the volumetric water content and infiltration velocity is more than 20 mm/day resulting in expansion of wetting front in the soil.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.5-13
• /
• 2009

The runoff-reducing facilities using infiltration was considered for the sustainable and sound water management. However, for practical utilization, many problems are attended and therefore effort on improvements are required. In this study, methods of improvement for infiltration facilities proposed by Infiltration-Storage System (ISS) and the effect of runoff reduction were analyzed by hydraulic experimental study. In order to analyze the infiltration characteristics of proposed runoff reduction facilities in this study, it was applied to various rainfall condition and surface material considering development and urbanization influences. As a results of hydraulic model experiment, Infiltration-Storage System (ISS) made addition to effect of reduction by lower layer of accumulative infiltration quantities. And then as rainfall-intensity was increased, accumulative infiltration rates were increased in this study. Thus, Infiltration-Storage system (ISS) was more efficient than existing runoff reduction facilities because of increasing infiltration rate. Such a result was guaranteed application of ISS as runoff-reducing facilities. Therefore, ISS is expected to be capable for practical application if subsequent research for improvements are followed. Additionally, results of this study are expected to provide fundamental research data on infiltration facilities.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.2
• /
• pp.5-11
• /
• 2015

Slope stability is affected by duration of precipitation, probable rainfall intensity, unsaturated soil property, and soil strength. The recent analyses of slope stability tend to include unsaturated analysis based on infiltration properties of soil, while researches of unsaturated soil slope tend to include the analysis of deformation and stress distribution of soil over time. However, infiltration property of unsaturated soil slope depends not only on intensity or duration of precipitation, but also on relief and surface condition, which is not considered in status quo. This research uses hydrologic model parameters of soil in order to consider effects of inclination on filtration, and carries out analysis of unsaturated soil slope to confirm the effects according to slope inclination and surface condition. In conclusion, using slope stability analysis, the need to consider infiltration rate according to inclination and surface condition was confirmed even under the same precipitation conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.495-501
• /
• 2012

Spray characteristics of liquid jets in crossflow, which can be observed in the liquid jet injection system of a gas turbine or ramjet engine, were experimentally investigated. By measuring liquid jet penetration in the case of single orifice and double orifice injectors, the experimental formula for jet penetration was modified to consider penetration distances greater than that considered in a previous study. The changes in spray characteristics resulting from changes in the liquid jet and crossflow pressure, including SMD and jet disintegration, were carefully studied. Specifically, the jet penetration was measured for different injector shapes, and in the case of a double orifice injector, the penetration of the rear orifice jet was found to be greater by approximately 20% ($L_h$ = 4 mm) compared to that in the case of a single orifice injector because of the influence of the front orifice.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.37-47
• /
• 2010

To improve the grout penetration characteristics, a vibratory grout injection technique was adopted in this study. It is a technique of grout injection in which an oscillating pressure is added to the steady-state pressure as an injection pressure. By applying the vibration during grout injection, cement particles will become less adhesive and the clogging tendency will be decreased. A series of pilot-scale chamber tests were performed to verify the enhancement of the groutability by applying the vibratory grout injection; assessment on the change of the lumped parameter $\theta$ which represents a barometer of clogging phenomenon was made. Moreover, the effect of vibratory grout injection through the joint was also investigated using artificially made rock joints. Experimental results as well as analytical results show that the grout penetration depth can be substantially improved by vibratory grouting. Moreover, it was found that enhancement of the permeation grouting due to vibratory injection is more dominant at grouting pressure less than 400 kPa.