• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.2
• /
• pp.59-68
• /
• 2001

A water balance analysis was performed for a paddy field neighboring the Dongchang stream, downstream of the Unmun reservoir, which is constructed for the urban water supply. Daily rainfall data were collected and irrigation water flow rate, drainage flow rate, evaportranspiration, infiltration, and piezometeric head were measured in the field. The flow rates were continuously observed by water level logger during the growing season. The evaportranspiration and the infiltration were measured by N-type depletion meter and cylindrical infiltrometer, respectively. PVC pipes with 12mm diameter were used for piezometric head measurement. Total Irrigation and drainage flows were 3,608mm and 1,170mm in 1999, and 3,971mm and 1,548mm in 2000, respectively. The mean and range of the daily infiltration rate were 4.4mm/d and 3.4mm/d to 5.5mm/d in 1999 and 5.1mm/d and 4.1mm/d to 6.5mm/d in 2000, respectively. The net ground water flow including the change of soil water storage was 2,855mm in 1999 and 2,540mm in 2000. The evapotranspiration was 458.3mm in 1999 and 553.5mm in 2000. The range of daily evapotranspiration rate was from 1.6 to 8.7mm/d. The return flow ratio was about 32% in 1999 and 39% in 2000 and three year average was 35% including previous study in 1997. The amount of irrigation water was much higher than design standards or references in this study, This was caused by the inadequate water management practice in the area where water was oversupplied on farmers’ request rather than following sound water management principles.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.197-201
• /
• 1992

The temperature dependence of the magentic moment was determined for the system of high $T_{c}$ superconductor $Y_{1-X}Sm_{x}Ba_2Cu_3O_{7-y}$ with x=0, 0.2, 0.4, 0, 6, 0.8 and 1.0. Also the magnetic susceptibility and the magnetic critical current density were measured from the magnetic hysterisis loops obtained at 30 K. From the results of the magnetic susceptibility measurements, the high $T_{c}$ phase were ranged from 14.7 to 49.1%. The values of the magnetic critical current densities were in the range of $10^3~10^4A/cm^2$. The penetration depth was approximately ninety times larger than the coherence length.

• Conservation Science in Museum
• /
• v.2
• /
• pp.27-34
• /
• 2000

24 wooden objects excavated from Daho-ri were identified into 8 categories such as Quercus spp. (37.7%), Castanea crenata (8.3%), Prunus (8.3%), Ilex (4.1%), Alnus spp. (25%), Prunus spp. (4.1%), Zelkova serrata (4.1%) and Fraxinuse (8.3%). Physical properties of the above high water content, high contraction rate and significant density reduction. As for degradation pattern, observation with polarizing microscope showed significant decrease of double reflection phenomenon in most of the excavated objects excluding vessel compared to other kinds of objects, and observation with SEM showed remarkable degradation of organization structure including the 2nd cell wall of wood. Reagent can be easily penetrated and diffused into the objects with high degradation rate, so it's beneficial to treat them with polymers such as PEG#4000(MW:3,350), but in order to prevent contraction and change in shape, high concentration of Reagent is required in treatment to hold wood organization structure.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.4
• /
• pp.5-11
• /
• 2018

In conventional analytical solutions for rainfall-induced soil slope stability, the Green-Ampt (1911) equation for estimating the saturation depth and the Skempton & DeLory (1957) equation for calculating the infinite slope shallow failure were compared with the numerical analysis to confirm the error. In the simple evaluation of the reason of soil slope instability due to rainfall using the conventional equations, there are many errors and, overestimation or underestimation of the calculation results. In this study, the equation consisting of the results obtained from infiltration analysis on unsaturated soil slope is proposed by applying the average range of the strength parameters of the granite weathered soils, and its reliability is verified by comparing with the numerical analysis results. The developed equation can be used easily in various fields for the estimation of slope safety factor by checking the rainfall duration and saturation depth.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.25-30
• /
• 2006

When wet soil overlies dry soil, which can be found in the infiltration test, the radar wave is not attenuated and guided within wet soil layer. This phenomenon is known to be the dispersive guided wave and happens when the thickness of upper wet layer is less than or comparable to the wavelength of radar wave. In this study, we have conducted the FDTD modeling and obtained the velocity dispersion curve to identify the dispersive guided wave through F-K analysis. This guided wave can be explained by modal propagation theory and a simple inversion code was developed to obtain the two layer's dielectric constants as well as layer thickness. By inverting the dispersion curve from synthetic modeling data, we could obtain the accurate dielectric constants and layer thickness. Moreover, we could enhance the accuracy by including the higher mode data. We expect this method will be very useful to get the quantitative property of subsurface when the condition is similar.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.520-528
• /
• 1992

In order to establish the standard conditions for thermal sterilization of foods, a microcomputer based $F_o-value$ measuring system was developed upon the basis of the time-temperature profile in food. $F_o-value$ was calculated simultaneously from the time-temperature profile, and described as integrated lethality during the whole sterilization process. The accuracy of system was evaluated by the analysis of thermal diffusivity of the model solid food, Alaska pollack surimi. The $F_o-value$ could be measured precisely under the different sterilizing conditions as the varied time and temperature. The practical thermal diffusivities from various sterilizing conditions agreed well to the values predicted by some experimental equations suggested in the literatures. The differences were within the range of $\pm12\%$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.10-10
• /
• 2010

가시광역에서 80% 이상의 높은 투과율과 전기전도성을 동시에 갖는 투명전도성 산화물(TCO) 박막은 LCD, PDP, OLED, 태양전지 등의 다양한 분야에 투명전극재료로서 사용되고 있다. 이들 TCO 박막은 Magnetron sputtering, Chemical vapor deposition, Pulse laser deposition, Ink jet등과 같은 다양한 방법으로 증착할 수 있지만, 대면적의 기판에 균일한 박막형성 및 박막과 기판의 높은 부착력등 양산성의 관점에서 우월성을 가지고 있기 때문에 생산라인에서는 DC magnetron sputtering법이 주로 사용되고 있다. 이 경우, 산화물 박막의 미세구조, 내부응력, 광학적 및 전기적 특성은 스퍼터링 과정에서 발생하는 고에너지 입자들의 기판입사 충격에 크게 의존하기 때문에 고품질의 TCO박막을 제작하기 위해서는 증착공정인자들의 제어는 매우 중요한 것으로 알려져 있다. 대표적 TCO박막재료로서 $In_2O_3$계, ZnO계 및 $SnO_2$계를 들 수 있으며, 이들 중에서 Sn을 $In_2O_3$에 치환고용시킨 ITO박막의 경우, 전기적 및 광학적 특성이 상대적으로 우수하기 때문에 실용화 TCO박막으로서 가장 널리 사용되고 있다. 한편, Flexible display의 경우, 유연성의 폴리머기판위에 증착되는 TCO박막에 대하여 요구되는 특성으로는 높은 투과율 및 낮은 비저항은 물론, 박막표면의 평활도 (낮은 표면조도), bending에 대한 높은 기계적 특성 (낮은 내부응력), 수분침투에 대한 높은 barrier특성 및 저온공정 등을 들 수 있다. 그러나 높은 전기전도도를 가지는 ITO박막을 제작하기 위해서는 $200^{\circ}C$ 이상의 증착온도가 필요하며, 이때 얻어진 다결정의 ITO박막은 높은 표면조도 및 bending시에 낮은 기계적 내구성이 문제점으로 지적되고 있다. 한편, 기판가열 없이 증착한 비정질 ITO박막은 낮은 표면조도, 높은 엣칭속도 및 양호한 식각특성을 나타내지만, 상대적으로 높은 비저항 및 기판과의 낮은 부착력 등이 지적되고 있다. 따라서 본 강연에서는 비정질 ITO박막의 결정화 온도 (약 $160^{\circ}C$) 이상에서도 비정질 구조를 유지하기 때문에 낮은 표면조도와 높은 엣칭속도를 가지면서 상대적으로 전기적 특성과 기계적 내구성이 개선된 새로운 고온형 비정질 TCO박막에 대한 최근의 연구성과를 소개하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.186-186
• /
• 2012

최근 Flexible organic electronics 분야에 대한 관심과 더불어 소자의 산소 및 수분의 침투를 방지하기 위한 투습방지막 연구가 활발히 진행되고 있다. 이에 본 연구에서는 Closed Drift Linear Source(CDLPS) 플라즈마 공정을 이용하여 저온 고속의 $SiO_xC_yH_z$ barrier flims 형성 연구를 진행하였다. HMDSO(hexamethyldisiloxane), TMS(trimethylsilane)와 산소를 기반으로 HMDSO/HMDSO+산소의 비율에 따라 $Si(-O_x)$ 변화에 따른 특성 평가를 진행하였다. X-ray photoelectrom spectroscopy(XPS) 및 Ft-IR spectrometer 측정 시 3.7% 비율에서 실리콘 원소가 산소 라디칼과 효율적인 반응을 함으로써 단일한 $SiO_2$ 박막이 형성됨을 확인 하였다. 그와 반면에 비율의 증가로 인해 다량의 HMDSO 물질이 주입 되었을 시 산소 라디칼과 충분히 반응 되지 못하여 $SiO_2$에 비해 $Si(CH)_x$ 가 많이 함량 된 Polymer like한 $SiO_x$가 많이 형성되었다. 박막의 증착율의 경우에는 3.7%에서 18%로 증가함에 따라 35 nm/min에서 180 nm/min의 증착율을 가지는 것을 확인 하였다. 3.7% 비율의 단일 $SiO_2$ 공정 조건으로 유기태양전지에 형성 하였을 시 소자의 에너지 변환 효율(PCE)이 변화 없는 것을 확인하였다. 이는 기존 공정에 비해 CDLPS 플라즈마 공정의 경우 유기소자에 플라즈마로 인한 열에너지나 이온 충격 에너지로 인한 영향 없는 것을 확인 할 수 있다. 이런 장점을 통해 CDSPS를 이용한 공정 기술은 다양한 유기 소자의 barrier 형성 연구에 큰 도움이 될 것이다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.445-451
• /
• 2019

In this study, we evaluated the durability of concrete produced with recycled polymer that could replace synthetic polymer, which is the main raw material of bridge deck concrete pavement. As a result of the slump and air content test, the requirements of the Korea Highway Corporation Standard were satisfied with all mixing conditions. The slump was lowered when incorporating the recycled bio-polymer, compared to other mix proportions concrete. In contrast, the compressive strength was increased by 6.3~24.4% when the recycled bio-polymer was mixed, compared to the concrete produced with synthetic polymer. It should be noted that the compressive strength was lowered when synthetic polymer was added to concrete mixture. Durability test results showed the best durability when incorporating synthetic polymer. The durability of concrete also increased as the amount of recycled bio-polymer increased, however, the impact was slightly smaller than that of synthetic polymer.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.257-265
• /
• 2012

Since the collapse of MSE walls frequently occurs due to the rainfall, it is necessary to analyze the behavior of MSE wall depending on the characteristics of rainfall and the properties of permeability of backfill. In order to understand the behavior of MSE wall depending on the characteristics of rainfall and the properties of permeability of backfill, finite element analyses were performed on the typical MSE wall. With varying ratio of saturated permeability to rainfall intensity, porepressures, displacements and factor of safety were analyzed. As the ratio of the saturated permeability to rainfall intensity increases, the global factor of safety is found to increase. Based on the analyses, the use of permeability of backfill with $2.56{\times}10^{-5}m/sec$ is desirable considering the characteristics of rainfall in Korea.