• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.109-116
• /
• 2018

In order to destroy the hard target, it is essential to develop a penetration warhead with high penetration performance. To design a penetration warhead, this paper discusses the effect of nose shape factors such that nose shape, nose length, nose tip diameter, on the penetration performance of the penetrator. AUTODYN-2D has been used to conduct the computational analysis. The experimental result of Forrestal, and a simulation result have been compared to verify the reliability of computational analysis. Computational results show that the nose length have more influence on the penetration performance than the nose shape. Furthermore, simulation results show that the penetration performance can be improved by increasing the nose tip diameter to a specific value, when the nose length of the penetrator is uniform.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.4
• /
• pp.79-88
• /
• 2007

Concrete structures undergo degradation of durability performance and it generally propagates to the structural problems. Recently. a lot of materials for surface protection for concrete are developed, however, performance is not clearly improved due to the difficulties such as repair construction technique and quality of materials for repairing. In this study, liquid inorganic impregnant for concrete structures is developed and durability performance for impregnated concrete specimens is carried out. Furthermore, the performances of the concrete specimens with developed impregnant is also compared with those of the specimens with impregnant conventionally used. Additional CSH gel is formed through the reaction of calcium hydroxide ($Ca(OH)_2$) and impregnant with silicate. As a result of the reaction, impregnated concrete is evaluated to have more denser surface and resistance to deterioration. Finally it is experimentally verified that the concrete specimens with developed impregnant show better durability performance than normal specimens and those with conventional impregnant.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.177-184
• /
• 2010

When cement grout is used for waterproofing of grounds, important roles are played by fluidity, particle size and bleeding. The most important element which determines their characteristics is the water/cement ratio of grout. Moreover in order to improve the efficiency of soil permeation, micro cement with a smaller average diameter is used in addition to ordinary portland cement. Besides the mixing ratio and cement diameter, the condition of ground is also of fundamental importance in the efficiency of permeation. In order to evaluate grout in terms of permeation ability into ground, we need a field test of grounting, which is cost and time consuming. In this paper we present a laboratory test method in which the suitability and efficiency of grouts are simply and more practically tested. In Korea neither a test standard nor devices are available to simulate grouting in a laboratory. We devised a grout injection equipment in which grouting was reproduced in the same condition with different materials, and suggested a standard for the production of specimens. Our tests revealed that the efficiency of injection increases with the water/cement ratio. We also found that more efficiently injected is the grout with the order of decreasing size; MS8000, micro cement, and ultra fine cements, and colloidal super cement.

• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.307-315
• /
• 2012

In this paper, a laboratory model test was conducted to evaluate grouting efficiency of ordinary portland cement(OPC) and micro cement used in MIS(Micro-Injection Process System). For this research, a injection equipment was developed for pressure permeation which can evenly simulate various grouting tests in a laboratory and suggested a standard for the production of the test specimen. Using the injection device, the laboratory injection tests of grouts were prepared with water/cement ratio of 1:1, 2:1, 3:1, 4:1, and 5:1. The analysis of injection test for pressure permeation showed that the efficiency of injection increases linearly as the water/cement ratio increases. Comparison of efficiency of the injection indicates that MIS with a relatively smaller average diameter shows more efficient injection than the OPC. In the low ratio of water/cement as 2:1~1:1, the injection efficiency of OPC was especially poor. Also, a nonlinear grout volume-injection time is represented by a hyperbolic model and grout volume predicted by hyperbolic model was compared with the value measured. From the comparison, it shows that the hyperbolic model has the potential of evaluating the efficiency of grouting.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.475-482
• /
• 2007

The property and applicability of the organic-inorganic synthesized penetrating and reinforcing agent, which is developed in order to improve durability of concrete structures and prevent deterioration that may occur as service years increased, are researched with experimental works. TEOS (tetra-ethoxyorthosilicate) and acrylate monomer are synthesized by the solution polycondensation method in order to formulate silicate with sol-gel process and improve durability of concrete. Additional substances such as isobutyl-orthosilicate is supplemented in order to improve the performance of the agent. After the developed organic-inorganic penetrating reinforcing agent penetrates, a flexible impact alleviating layer is formed with organic monomers as well as the agent strengthens concrete by filling up the internal pore of concrete with stable compounds after penetration. Penetrating and reinforcing agent can be applied as an effective life management method because it makes concrete more durable against the aging factors, such as chloride ion, carbonation, freezing-thawing, and compound aging.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.690-690
• /
• 2013

Field에 설치된 PV모듈은 가혹한 외부 환경에 노출되어 외부 하중, 온도 변화, 자외선, 수분 등의 영향을 받게 된다. 특히 PV모듈 내부로 수분이 침투 하였을 경우에는 태양전지와 전극의 부식 등 발전성능을 크게 저하시킬 수 있다. 이러한 외부 환경으로부터 태양전지가 안정적으로 발전할 수 있도록 PV 모듈은 전면재료인 유리와 후면재료인 Back Sheet를 진공 상태에서 압력을 가해 봉합하는 Lamination 공정을 거쳐 제작 되어 진다. 특히 Lamination 공정에 사용되는 EVA (ethylene vinyl acetate)는 PV모듈의 내구성능을 좌우할 수 있는 가장 중요한 재료중 하나이다. 본 논문에서는 Lamination 공정에 사용되어지는 EVA의 수분 침투의 특성에 관한 연구를 수행하였다. 공정 조건에 따른 EVA에 침투 되는 수분의 양을 확인하기 위해 Lamination 공정 조건을 변경하여 실험을 진행하였다. 그리고 외부 환경 변화에 의한 영향을 확인하기 위해 EVA가 수분에 노출 되는 시간과 온도를 변화시켜 보았다. 실험의 결과는 외부에 노출된 PV 모듈의 내부에 침투할 수 있는 수분의 양을 예상할 수 있게 하며, 수분 침투에 의한 내구성의 저하를 감소시키기 위한 최적의 Lamination 공정 조건과 봉합재 선정을 위한 기초 자료를 제공한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.39-45
• /
• 2017

In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.397-404
• /
• 2019

Linear Shaped Charge (LSC) that is widely used as separation system in aerospace system has to charge lots of explosives due to lack of uniformity. In addition, it is hard to optimize shape of liner and explosives because of manufacturing process. In order to overcome aforementioned drawbacks, Precision Linear Shaped Charge (PLSC) is currently under development. PLSC is made in two steps: prepare liner independently and charge explosive uniformly. In this study, PLSC is designed to have proper amount of explosives and penetration test of PLSC with different stand-off distance from liner to target is conducted to confirm penetration performance. Based on the penetration test results of PLSC, the numerical analysis method using AUTODYN is established and verified. Penetration mechanism and characteristics of PLSC is analyzed from the numerical and experimental results.

• Fire Science and Engineering
• /
• v.28 no.2
• /
• pp.14-19
• /
• 2014

A current standard exist only on the surface tension in the current domestic wetting agent technology standards, so it is difficult to the performance evaluation of the wetting agent through the standard. So this study presents the optimized performance evaluation methods by scale model experimental equipment in order to present techniques for performance evaluation of wetting agents. The purpose of this study is to investigate validity of experimental results of the self-designed scale model experiment equipment by a comparative analysis of experimental results of the NFPA 18 experiment and the experiment using the self-designed scale model experiment equipment. As a result of a comparative analysis of experimental results of the NFPA 18 experiment that evaluate only the permeation performance on the contton and the experiment using the self-designed scale model experiment equipment that evaluate the permeation performance and fire extinguishing performance on wood flour, the discrimination of the permeation performance was confirmed in both the NFPA 18 experiment and the self-designed scale model experiment equipment. And a result of self-designed experiment equipment have clear discriminatory more than NFPA 18 by internal temperature measurement using the thermocouples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.809-814
• /
• 2000

이 연구의 목적은 비침투적으로 펌프의 유량을 알아내고, 이를 이용하여 펌프의 성능을 감시하는데 있다. 그리고 운전중인 펌프의 상태를 감시함으로써 펌프의 결함을 진단하는데 있다. 위 목적을 달성하기 위하여 본 연구에서는 비침투적으로 측정이 가능한 변수인 모터 토크와 회전속도를 이용하여 펌프의 성능을 예측할 때 필수석인 유량을 알아내는 Simulator를 개발하였다. 유량의 변화를 감시함으로써 펌프의 성능 변화를 감시하는 일반적인 방법을 적용하면 펌프의 성능을 효율적이며 경제적으로 감시를 하는데 이용할 수 있다.