• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.225-232
• /
• 2017

Most of the red ginseng (RG) products contain active substances derived from hot water or alcohol extraction. Since active substances of RG are divided into two types - water-soluble and liposoluble - water or alcohol is needed as an extraction solvent and this leads the different extraction yields and components of the active substances. To overcome the limit, whole red ginseng powder can be used and consumed by consumers. In this study, the physicochemical properties and extractable active substance contents of variable-sized RG powder ($158.00{\mu}m$, $8.45{\mu}m$, and $6.33{\mu}m$) were analyzed, and dispersion stability was measured to investigate the suitable size of RG powder for industrial processing. In the results, no significant difference was found from the changes in color intensity and thiobarbutric acid tests at $4^{\circ}C$, $25^{\circ}C$, and $40^{\circ}C$ for 4 weeks. There was no significant difference on the production of antioxidants and ginsenoside among the samples (p>0.05). In dispersion stability, $RG-158.00{\mu}m$ was precipitated immediately, and the dispersion stabilities between $RG-8.45{\mu}m$ and $RG-6.33{\mu}m$ showed no significant difference. It implies that fine RG is suitable for the production process. With further study, it seemed that the physicochemical effects of RG particle sizes can be clearly revealed.

• Development and Reproduction
• /
• v.12 no.3
• /
• pp.289-296
• /
• 2008

BPES (Blepharophimosis/Ptosis/Epicanthus inversus Syndrome) is an autosomal dominant disorder caused by mutations in FOXL2. Affected individuals have premature ovarian failure (POF) in addition to small palpebral fissures, drooping eyelids, and broad nasal bridge. FOXL2 is a member of the forkhead family transcription factors. In FOXL2-deficient ovaries, granulosa cell differentiation dose not progress, leading to arrest of folliculogenesis and oocytes atresia. Using yeast two-hybrid screening of rat ovarian cDNA library with FOXL2 as bait, we found that small ubiquitin-related modifier (SUMO)-conjugating E2 enzyme UBE2I protein interacted with FOXL2 protein. UBE2I also known as UBC9 is an essential protein for processing SUMO modification. Sumoylation is a form of post-translational modification involved in diverse signaling pathways including the regulation of transcriptional activities of many transcriptional factors. In the present study, we confirmed the protein-protein interaction between FOXL2 and UBE2I in human cells, 293T, by in vivo immunoprecipitation. In addition, we generated truncated FOXL2 mutants and identified the region of FOXL2 required for its association with UBE2I using yeast-two hybrid system. Therefore, the identification of UBE2I as an interacting protein of FOXL2 further suggests a presence of novel regulatory mechanism of FOXL2 by sumoylation.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.19-30
• /
• 2010

Bentonite-based grout has been widely used to seal a borehole constructed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because of its high swelling potential and low hydraulic conductivity. Three types of bentonites were compared one another in terms of viscosity and thermal conductivity in this paper. The viscosity and thermal conductivity of the grouts with bentonite contents of 5%, 10%, 15%, 20% and 25% by weight were examined to take into account a variable water content of bentonite grout depending on field conditions. To evaluate the effect of salinity (i.e., concentration of NaCl : 0.1M, 0.25M, and 0.5M) on swelling potential of the bentonite-based grouts, a series of volume reduction tests were performed. In addition, if the viscosity of bentonite-water mixture is relatively low, particle segregation can occur. To examine the segregation phenomenon, the degree of segregation has been evaluated for the bentonite grouts especially in case of relatively low viscosity. From the experimental results, it is found that (1) the viscosity of the bentonite mixture increased with time and/or with increasing the mixing ratio. However, the thermal conductivity of the bentonite mixture did not increase with time but increased with increasing the mixing ratio; (2) If bentonite grout has a relatively high swelling index, the volume reduction ratio in the saline condition will be low; (3) The additive, such as a silica sand, can settle down on the bottom of the borehole if the bentonite has a very low viscosity. Consequently, the thermal conductivity of the upper portion of the ground heat exchanger will be much smaller than that of the lower portion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.251-258
• /
• 1984

In order to improve the physical properties on moisture sorption of spray dried red ginseng extract powder (SD-RGEP), the various additives and coating agents were treated, and solubility, sedimentation rate and storage stability of RGEPs treated were investigated. For the moisture-proofing, additive itself was effective in the order casein>dextrin>starch>avicell, but RGEPs treated with additives were effective in the order cord oil+tween-40>starch>casein. But there was no significant difference between RGEP treated less than 1% additive and the moisture-proofing. The coating effect of AEA and CAP on RGEP could not be recognized for the moisture-proofing, whereas that of HPC, corn oil, lecithin and HPC+corn oil was proved to be very effective for the moisture-proofing of RGEP. Also it is required to control the initial moisture content of RGEP. The sedimentation rate of RGEP nontreated was 65.1 seconds, whereas that of RGEPs coated with 1% HPC, 1% corn oil, 1% lecithin and 1% HPC+0.5% corn oil was in the range of 96.2 to 114.3 seconds. The sedimentation rate of RGEPs coated was 1.5 to 1.8 times higher than that of RGEP nontreated, and there was significant difference between solubility and sedimentation rate. Therefore it was no matter for the keeping quality. The sorption rates of RGEPs coated with lecithin $(0.5{\sim}1.0%$), corn oil(0.8%) and cellulose acetate (0.8%) were ranged 54 to 56%, 51 to 55% and 52 to 54%, respectively, and it is found that the moisture-proofing effect of RGEPs coated was about 2 times higher than that of RGEP nontreated. From the result of storage experiment during 3 months under the maltreated condition of $48{\pm}2^{\circ}C$, 75% RH, the moisture sorption of RGEPs coated with corn oil$(0.5{\sim}1.0%$), cellulose acetate(DES, $0.5{\sim}0.8%$) and lecithin (DES, 1.0%) was not at all observed. Therefore it is considered that the circulating period of RGEPs coated with these coating agents could to give more than 3 years.