• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.4
• /
• pp.242-249
• /
• 1982

Effects of lime and ameliolating materials on decreasing available soil cadmium were studied, applying the amendments to Cd pre-and post-treated soils. Soil sttreated with Cd were placed in pots and kept under field moisture condition, summer through winter in 1981. The results of soil analysis made 40 to 60 days after the Cd treatment are as follows ; 1. Greater amount of Cd was extracted by 0.1N-HCl or 2% Citric acid than N-AcNH4 solution. More Cd was dissoluted by 0.1-HCl than 2% Citric acid. No Cd was extracted by pure water. Showing a wide variance in the amount of extractable Cd among treatments (amendments), the $N-AcNH_4$ solution seemed to be the most effective extracting solution of available soil cadmium. 2. Calcium hydroxide was the most effective materials in reducing $N-AcNH_4$ extractable Cd, followed by calcium carbonate and calcium silicate. 3. Superphosphate is also effective in reducing exchangeable cadmium. The reduction seemed to be attributed to the precipitation of cadmium phosphate. 4. The exchangeable cadmium by $N-AcNH_4$ was large in the soil pH range of 6.0 and 6.5, and it decreased as the soil pH became far apart from these values. The decrese of exchangeable Cd at low pH seemed to be related to the increase of $Mn^{+{+}}$ and that at the high pH to the precipitation as Cd-hydroxide.

• Microbiology and Biotechnology Letters
• /
• v.7 no.3
• /
• pp.135-140
• /
• 1979

A Streptomyces sp. strain AS-727 which was capable of producing penicillinase, was isolated from soil. The enzyme production was affected by the carbon and nitrogen sources added. Among them so far tested, glucose (or maltose) and sodium nitrate increased the enzyme production. And the amount of enzyme prodced reached maximum in 4 days cultivation. The optimla pH and temperature of the penicillinase was between pH 6.0 to 8.0 and 4$0^{\circ}C$ respectively. The stabel pH range of the enzyme was stable at 4$0^{\circ}C$, but it lost about 30％ and 40％ of the the activity respectively when it was treated at 6$0^{\circ}C$ and 8$0^{\circ}C$ for 60 minutes. The activity of the enzyme was inhibited by Z $n^{++}$, but A $g^{+}$, $Co^{++}$, $_Mn^{++}$, $Ca^{++}$, P $b^{++}$ did not affected enzyme activity. Peculiarly, the enzyme protein precipitated by freezing or addition of ammonium sulfate, urea, sodium chloride and some organic solvents as etanol, methanol, acetone was not dissolved in deionized water or any buffer solution.n.n.ion.n.n.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.253-266
• /
• 1989

The Cu-Pb-Zn-Ag hydrothermal vein type deposits which comprise the Dongil and Dong-cheogogsan mines occur within the Cretaceous sedimentary rocks in the Euiseong Basin of the southern Korean peninsula. The ore mineralization is contained within three stage(I,II and III) quartz and calcite veins. Ore minerals occur as dominant chalcopyrite, galena, sphalerite, tetrahedrite and Pb, Ag, Sb and Bi-bearing sulfosalts. Stage I ore minerals were deposited between $400^{\circ}C$ and $200^{\circ}C$ from the fluid with moderate salinities(7.0 to 4.5 eq. wt. % NaCl). Evidence of boiling suggests pressure of less than 150 bars during stage I mineralization. This pressure corresponds to maximum depths of 650 m and 1700 m, respectively, assuming lithostatic and hydrostatic loads. The data on mineralogy, temperature and salinity, together with information on the solubility of Cu complex, suggest that Cu deposition is a result of boiling coupled with declining temperature from $350^{\circ}$ to $250^{\circ}C$ or declining log $a_{o_2}$(from -29.8 to -35.9 atm.)and increasing in pH. Pb, Ag, Sb and Bi-bearing sulfosalts were deposited by cooling and dilution at temperature of less than $250^{\circ}C$ from the ore fluid with less than -35.9 atm. of log $a_{o_2}$.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.597-608
• /
• 1994

A new process for the production of high purity ${\alpha}-Al_2O_3$ from ammonium aluminium sulfate solution abtained through the sulfation of low grade bauxite ore with $(NH_4)_2SO_4$, and leaching of the sulfated product was investigated. This process is consisted of solvent extraction for Fe component removal from ammonium aluminum sulfate solution and homogeneous precipitation of Al containing precipitate from the refined ammonium aluminium sulfate solution by using urea as precipitator. The optimum conditions of solvent extraction with Alamine 336 as extractant were shaking time of 4min, organic phase ratio to aqueous phase of 0.25. The types of precipitation products from this precipitation were amorphous alumina gel, pseudo-boehmite and crystalline boehmite in the lower temperature of $100^{\circ}C$, in the range from $125^{\circ}C$ to $150^{\circ}C$, and above $150^{\circ}C$, respectively. And also amorphous alumina gel hydrate in $1000^{\circ}C$ and crystalline boehmite in $1250^{\circ}C$ were tranfered to ${\alpha}-Al_2O_3$, respectively. This alumina was identified as ${\alpha}-Al_2O_3$ of purity 99.7%.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.816-821
• /
• 2017

An integrated slow mixing/sedimentation and net fit fiber filtration system has been developed to reduce the high concentrations of suspended solid (SS) and total phosphorus (T-P) in the reject water from sewage/wastewater. A filtration device used in this experiment consists of coagulation, in-line mixing, air injection, slow mixing/sedimentation, and filtration processes. The performance test using this device was carried out with six operational modes for reject water from sewage treatment plant. Experimental conditions used were 16.7, 33.3, 41.7 and 50.0 ton/day of flow rate and 2~4 of Al/P molar ratio. By injection of coagulant in each operational mode, the high removal efficiencies of SS and T-P were obtained, but continuous operation time was decreased to 7.8~11.4 min in most modes. However, when the Mode 5 of the developed filtration device was applied, the continuous operation time was maintained up to 88.2 min. Also, it was found that the continuous operation time in the Mode 5 using the developed system was increased from 8 to 11.3 times longer than those in other modes. Backwashing flow rate was also very low at 5.4% of total filtered water. Therefore, it can be concluded that the Mode 5 of the developed filtration system was the most efficient treatment method for the removal of high concentrations of SS and T-P.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.200-207
• /
• 2009

As an effort to utilize the pine woods damaged by pine wilt disease, this study analyzed the density of pine wood nematode and compressive strength of damaged trees treated through soaking and fumigating. The density of nematode in Pinus densiflora and Pinus thunbergii woods soaked in wood vinegar and nematicide, and in seawater reduced greatly in 21 days and in 30 days, respectively. When reextracted nematode was injected artificially into healthy trees, infection was not observed after the lapse of six months, and the mean density of Pinus densiflora and Pinus thunbergii was $0.47g/cm^3$ and $0.54g/cm^3$, respectively, and their compressive strengths were $304kgf/cm^2$ and $363kgf/cm^2$, respectively. As to change in the density of pine wood nematode after fumigating, pine wood nematode was detected until the third month in both species, and those detected afterwards were found to be similar nematodes. After 24 months, the mean densities of Pinus densiflora and Pinus thunbergii were $0.54g/cm^3$ and $0.52g/cm^3$, respectively, and their compressive strengths were $353kgf/cm^2$ and $370kgf/cm^2$, respectively.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.393-397
• /
• 1995

With a view to utilizing fish skin gelatin as a clearifier or chewing gum base, yellowfin sole skin gelatin was succinylated. Up to 10% succinic anhydride to gelatin, the succinylation degree of gelatin was increased linear and above this concentration a nearly constant value was reached. The succinylated gelatin treated with 15% succinic anhydride to gelatin was examined on the reactivity properties with tannic acid in the experiment. Succinylation degree of the gelatin was about 80%. Succinylation shifted the apparent isoelectric point from pH 5.54 in untreated gelatin to pH 4.08 in succinylated gelatin. The proximate composition and amino acid composition of succinylated gelatin were similar to those of untreated gelatin. However Lysine composition for succinylated gelatin was lower than for untreated gelatin. The ratio of precipitated gelatin and tannic acid became maximum at pH 4.8 in untreated gelatin, at pH 4.0 in succinylated gelatin. Regardless of the difference between untreated and succinylated gelatins, the ratio of precipitated gelatin decreased with concentration of gelatin. The ratio of precipitated tannic acid was the highest by adding $2{\sim}4$ times in succinylated gelatin to tannic acid weight, by adding $2{\sim}3$ times in untreated gelatin. The ratios of precipitated succinylated gelatin and tannic acid were scarcely affected by the presence of sucrose, however, were affected by the presence of ethyl alcohol.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.327-333
• /
• 1993

A method was developed for the determination of trace elements in seawater by precipitate flotation preconcentration and subsequent flame atomic absorption detection. In order to quantitatively coprecipitate trace ions such as Cd(II), CuI(II), Fe(III), Mn(II), Pb(II) and Pd(II), 2.0 ml of 1.0M cerium(III) solution was added to 1.0l of seawater and the pH was adjusted to 9.5 with 5.0 M sodium hydroxide solution while stirring with a magnetic stirrer. The precipitate was floated with the aid of surfactant solution (1.0 ml of 0.3% sodium oleate) by bubbling nitrogen gas through a porous (No. 4) fritted glass disk. The floats was collected in a small Erlenmeyer flask by suction. The washed precipitate was dissolved in 8.0 M nitric acid and marked with deionized water in the volumetric flask of 10.0 ml. The analyte was determined by measuring the atomic absorbances in 100-fold concentrated solution. Above all analytes in Kangnung (East Sea) and Kanghwado (West Sea) sea waters were found to be under the detection limit of this method. The recoveries of over 92% for all analytes spiked into seawater samples showed that this method was applicable to the analysis of real seawater.

• Journal of Environmental Impact Assessment
• /
• v.28 no.3
• /
• pp.332-345
• /
• 2019

The purpose of the study is to evaluate the treatability of contaminated groundwater with TPH and (or) $Cr^{6+}$. Laboratory scale tests were performed for oil/water separation, dissolved air flotation (DAF), coagulation and precipitation, and filtration with sand and activated carbon respectively. Two times of oil/water separation tests for total 40 minutes of separation or separating time shows 90.2 % of TPH removal rate. In case of DAF test for high TPH sample, the TPH removal rates were not varied significantly by the variation of microbubble size. However, tests for low TPH samples show that TPH removal rate increases as microbubbles are smaller. When coagulant was added to sample for DAF test, TPH removal rate was increased 12.3 %. SS removal rate by DAF was 97.9 % at $16-40{\mu}m$ and it was increased as the size of microbubble is reduced. Tests for coagulation and precipitation were performed to evaluate the removal of $Cr^{6+}$ in groundwater. The increase of $FeSO_4$ dosage increased $Cr^{6+}$ removal rate in the coagulation and precipitation process. As the amount of activated carbon in the filter media increased TPH removal rate in the filtration process. SS removal rate by the filtration was 96.7 % similar to the results of DAF process tests. The filtration process treats TPH and SS. Best design parameters are determined as the size of sand is $425-850{\mu}m$ and the ratio of activated carbon and sand is 50:50.

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.244-251
• /
• 1990

Three viral insecticides were differently formulated with a nuclear polyhedrosis virus isolated from Spdodoptera litura by addition of feeding attractant, anti-precipitate of polyhedra, spreading agent, and UV-protectants. Sucrose was effective for attraction of larval feeding to increase the mortality and for protection of polyhedra from inactivation by sunlight when added 1% to 5% of sucrose solution to the formulations. Contents of additives to the formulations were 0.5% in polyvinyl alcohol to prohibit the precipitation of polyhedra and 0.1% in Triton X-100 to spread and wet the formulations to the plant. Inactivation of the virus under sunlight was decreased when added 800g of white carbon to 100 L of water in the white carbon formulation and 30% of molasses to the molasses's. In the formulation of white carbon and molasses mixtures, activation of the virus was increased when mixtured 500g of the former with 10% of the latter. Three formulations were persisted their pathogenicity more than 95% of mortality at 3 days p.i. Encapsulation of the polyhedral surface was more distinctively coated with the carbon and showed more effective in the residual effects of the white carbon than others, but the molasses more attractive for larval feeding.