• Korean Journal of Clinical Pharmacy
• /
• v.10 no.2
• /
• pp.74-79
• /
• 2000

Y-Site 투여시 $5\%$포도당액과 생리식염수에서 탁솔과 은단세트론의 안정성에 관해 실온과 형광등 아래서 연구하였다. 온단세트론 0.03 mg/ml, 0.1 mg/ml, 0.3 mg/ml와 탁솔 0.3 mg/ml, 1.2mg/ml를 각각 1:1로 혼합한 후 0, 1, 2, 4, 12시간에서 즉시 약물농도를 HPLC로 분석하였다. 방해물질에 의한 분석오차를 줄이기 위해 분석법을 여러상태에서 확인하였으며, 각 농도에서 3차례씩 실험하였고 각 샘플은 2차례 연속 HPLC 분석하였다. 분석전에 각 시료의 투명도, 색의변화, 침전상태 및 pH를 검사하였다. 온단세트론 0.03, 0.1 및 0.3 mg/ml와 탁솔 0.3 및 1.2mg/ml를 각각 혼합하였을 때 12시간 동안 안정성이 있었다. 혼탁이나 색의 변화 및 침전은 나타나지 않았으며 12시간 동안 pH의 변화는 특별한 경향이 없었다.

• Journal of Life Science
• /
• v.18 no.7
• /
• pp.992-998
• /
• 2008

We evaluated proanthocyanidin contents out of total polyphenolic compounds in two pine needle extracts prepared by combined extraction methods and compared their antioxidative activities. Amounts of total polyphenolic compounds of sub-supercritical hotwater precipitate (SSHP) and sub-supercritical hotwater supermatant (SSHS) were 225.4 and 116.6 mg/g, respectively. Amounts of proanthocyanidin of SSHP and SSHS were 9.9 and 3.6 mg/g, respectively. Thus, the ratio of proanthocyanidin contents over total polyphenolic compounds of SSHP and SSHS were 4.3 and 3.9%, respectively. Antioxidative activities ($IC_{50}$) of SSHP and SSHS measured by DPPH radical scavenging were 41.5 and $50.7\;{\mu}g/ml$, respectively. These results indicates that two combined extracts, SSHP and SSHS showed higher antioxidative activities than extract prepared by hot water or sub-supercritical. In conclusion, extraction procedures for SSHP and SSHS could be useful methods for preparing the effective components of functional food products.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.822-829
• /
• 2017

As a method to reduce the total phosphorus in sewage treatment plant, we applied the integral type slow mixing/sedimentation fiber filtration system to compare the control methods for the sewage effluent and the reject water. It was analyzed that about 92.4 kg T-P/day should be removed in order to satisfy the final concentration of phosphorus of 0.2 mg T-P/L, which is reinforced effluent standard. Therefore the total phosphorus removal efficiency should be 96% for sewage effluent and 69.2% for reject water (dehydrated filtrate) respectively. The system operation cost to achieve the target of total phosphorus removal efficiency was assessed. It has been found that the treatment cost of the reject water containing high concentration of phosphorus with a low flow rate is reduced to about 1/2.4 of the coagulant cost and about 1/120 of the electricity cost, compared to that of the sewage effluent treatment. Also the economics of the integral type slow mixing/sedimentation fiber filtration system and the general coagulation and sedimentation system were compared. It was evaluated that the development system was more economical because the installation area of the integral type slow mixing/sedimentation fiber filtration system was about 1/7 smaller than that of the general coagulation and sedimentation system, and the annual operation cost including the required amount of coagulant and electricity cost of the development system was lowered about 1/1.7 than that of the general system.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2013

A pilot scale coagulation system, which has a function of physicochemical treatment, was developed to treat Combined sewer overflows(CSOs). This coagulation system requires evaluation of optimum design factors whether it has reflected those of lab scale system, moreover, the pilot scale system can be evaluated differently according to the characteristics of influent CSOs even though it has reflected lab scale's design factors. We conducted an experiment using lab scale system that could treat $1m^3$ of CSOs in a day, and also pilot-scale system with $100m^3/day$ CSOs flowed into the Cheongju sewage treatment plant. Therefore the aim of this study is to evaluate a hydraulic similarity between the design factors of pilot scale and those of lab scale coagulation system, and to evaluate feasibility of the coagulation system for the CSOs treatment with optimum operation conditions. From the result of pilot-test, we drew the optimum operation factors of in line mixer and flocculator having similarities with those of lab scale system as well as the optimum coagulant dose. Finally we confirmed that the coagulation system has feasibility to treat the CSOs with high removal efficiency.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.44-52
• /
• 2021

This study investigated the effect of the type of alkaline precipitant used on the synthesis of lithium hydroxide by examining the behavior of lithium hydroxide produced using lithium sulfate recovered from a waste lithium secondary battery as a raw material. The double-replacement reaction (DRR) process was used to remove the impurities contained in the lithium salt precursor of lithium sulfate and to improve the efficiency of the synthesis of lithium hydroxide. The experiment was conducted by control the molar ratio of the precursor ([Li]/[OH]), the reaction temperature, and the composition of the alkaline precipitant (KOH, Ca(OH)2, Ba(OH)2) used for the production of highly-crystalline lithium hydroxide. A secondary solid-liquid separation was performed following the reaction to remove the impurities generated, and the purified aqueous solution of lithium hydroxide was evaporated to remove the moisture and obtain the product as a powder. The crystallinity and synthesis behavior of the product were examined.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.85-96
• /
• 2017

Gold mineralization of Samjeong and Yongjang gold mines in Uichang area shows characteristics of Bonanza-type gold deposits. Ores are mainly developed along the contact parts between quartz vein and arkosic sandstone beds(Fe-rich bed) in sedimentary rock. Electrum, silver sulfide and sulfate minerals are mainly in the ores. On the other hand, gold mineralization is less developed in cherty rock and andesitic rock than arkosic sandstone. The study highlights characteristics of gold precipitation in the deposit on the basis of numerical modelling of the reactions between the assumed hydrothermal ore fluids with multicomponent heterogeneous equilibrium calculations. Aqueous species, gases and minerals, containing electrum are included in the calculations. The reaction result between hydrothermal ore fluids and arkosic sandstone show that pH increasing in the ore-forming fluid would trigger precipitation of quartz, chlorite, sericite, chalcopyrite, galena, pyrite, electrum, actinolite and feldspar. The numerical modelling also illustrates the drastic increase of pH and desulfidation lead to precipitation of electrum. Ag/Au ratios in the ore vary with pH conditions and subsequently precipitation of silver-bearing sulfides such as acanthite and polybasite. The modelling of the reaction between andesitic rock and ore-forming fluid shows that mineral assemblages of the case are analogous to ones of the reaction between arkosic sandstone and fluid except the latter has little portion of electrum. The abovementioned modelling results suggest that gold-silver mineralization is bounded by host rocks at the study area.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.11-16
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was t$\xi$sted by precipitate flotation using a sodium lauryl sulfate as a c collector. The effects of initial cobalt ion concentration, pH, surfactant concentration, flotation time, gas flow rate and foreign i ions on removal efficiency of cobalt ion were studied. Pretreatment of the waste liquid with 35% $H_2O_2$, prior to precipitate f flotation made shin of optimal flotation pH from the strong alkalinity to weak alkaline range and made a favorable flotation of c cobalt ion in wide range of pH. For the result of this experiment, 99.8% removal efficiency was obtained on the conditions of initial coball ion concentration 50 ppm, pH 9.5 gas flow rate 70 mllmin, flotation time 30 min. The simulate ion was fanned t to be the most harmful ion against removal of cobalt by precipitate flotation of the species which were tested The presence of 0.1 M of $SO_4^{2-}$ ion decreased remo,때 $\xi$폐iciency of cobalt to 90% while the cobalt were almost entirely removed in the a absence of sulfate ion.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.139-151
• /
• 2009

Mineralogical characteristics of secondary precipitate formed at some mineral water springs in Gyeongbuk Province, Korea were studied in relation to water chemistry. The chemical water types of mineral water springs are mostly classified as $Ca-HCO_3$ type, but $Na(Ca)-HCO_3$ and $Ca-SO_4$ types are also recognized. Ca, Fe, and $HCO_3\;^-$ are the most abundant components in the water. The pH values of most springs lie in 5.76${\sim}$6.81, except Hwangsu spring having pH 2.8. Saturation indices show that all springs are supersaturated with respect to iron minerals and oxyhydroxides such as hematite and goethite. The result of particle size analysis shows that the precipitate is composed of the composite with various sizes, indicating the presence of iron minerals susceptible to a phase transition at varying water chemistry or the mixtures consisting of various mineral species. The particle size of the reddish precipitate is larger than that of the yellow brown precipitate. Based on XRD and SEM analyses, the precipitate is mostly composed of ferrihydrite (two-line type), goethite, schwertmannite, and calcite, with lesser silicates and manganese minerals. The most abundant mineral fanned at springs is ferrihydrite whose crystals are $0.1{\sim}2\;{\mu}m$ with an average of $0.5\;{\mu}m$ in size, characterized by a spherical form. It should be interestingly noted that schwertmannite forms at Hwangsu spring whose pH is very low. At Shinchon spring, Gallionella ferruginea, one of the iron bacteria, is commonly found as an indicator of the important microbial activity ascribed to the formation of iron minerals because very fine iron oxides with a spherical form are closely distributed on surfaces of the bacteria. A genetic relationship between the water chemistry and the formation of the secondary precipitate from mineral water springs was discussed.

• Korean Journal of Clinical Pharmacy
• /
• v.13 no.2
• /
• pp.91-96
• /
• 2003

Paclitaxel과 cephalosporines(제 1세대인 ceftezole sodium과 cephradine, 제2세대인 cefamandole sodium과 cefmetazole sodium, 제3세대인 cefoperazone sodium과 cefotaxime sodium 그러고 제4세대인 cefepime hydrochloride)을 $5\%$포도당주사액 그리고 $0.9\%$ 염화나트륨주사액과 함께 Y-Site 장치를 써서 환자에게 주입할 때 paclitaxel의 안정성에 관하여 연구하였다. Paclitaxel 0.3 mg/ml 및 1.2 mg/ml과 cephalosporines 20 mg/m을 각각 1 : 1로 혼합한 후 0, 1, 2, 4, 12시간 시점에서 paclitaxel의 농도를 HPLC로 분석하였다. 방해물질에 의한 분석오차를 줄이기 위해 분석법을 여러 상태에서 확인하였으며, 각 농도에서 3차례씩 실험하였고 각 샘플은 2차례 반복하여 HPLC로 분석하였다. 분석전에 각 시료의 투명도, 색의 변화, 침전상태 및 pH를 검사하였다. Paclitaxel 0.3 mg/ml 및 1.2 mg/ml와 cephalosporines 20 mg/ml를 각각 혼합하였을 때 12시간 동안 안정하였으며, 주사액의 혼탁이나 색의 변화 및 침전은 나타나지 않았으며 pH도 변하지 않았다.

• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.33-38
• /
• 1994

'Heterogeneous' vapor diffusion experiments were carried out using hen egg white Iysozyme and equine serum albumin as model proteins: droplets were equilibrated against reservoir solutiorls containing an alternative precipitant which is different from results showed that the use of polyethylene glycol as an alternative precipitant instead of NaCl or ammonium sulfate reduces equilibration rate between droplet and reservoir solution. By using the heterogeneous vapor diffusion techniqlue it is possible to control the equilibration rate by adjusting the relative amounts of ionic salts and nonionic yecipitants in reservoir solutions.