• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.5-14
• /
• 2006

In general, the dredged ground was composed of a big difference of sediment shape through segregating sedimentary of finer soil in case of reclaiming by dredged coarse soils. Therefore, this study was performed to evaluate the change of settling velocity of flow, and the density of sedimentary which is based on settling tests and self-weight consolidation tests, and consolidation test by seepage force according to the percentage of coarse of Kunsan dredge soils. The Yano's method has been applied to estimate the settlement of self-weight consolidation in finer soils at design but it only considers pouring water content and elevation of interface, therefore the other method needs to be introduced for the exact prediction of the settlement of coarse soil in which the segregation sedimentation is occurring. In this study, the settlement of self-weight consolidation was calculated by the change of the density of segregating sedimentary of coarse and finer soils which was analyzed by Yano's method to extend a serious of researches. The self-weight consolidation by Yano's method will not reflect the segregated settling in dredging coarse soil under 40% of #200 passing percentage. As a result, the evaluation technique of settlement of self-weight consolidation considering a change of the density of segregating sedimentary is suggested as a reasonable method that considers the sediment shape of coarse soil.

• Clean Technology
• /
• v.29 no.2
• /
• pp.95-101
• /
• 2023

An experiment was conducted to produce vaterite-type precipitated calcium carbonate from waste oyster shells in order to use them as recyclable resources. Calcined oyster shells containing calcium oxide as their main component were prepared at a temperature of 800℃ for 24 h. The oyster shells were dissolved in nitric acid or hydrochloric acid solution to make 0.1 M calcium nitrate or calcium chloride aqueous solution, and a carbonation reaction was performed using a 0.1 M sodium carbonate aqueous solution under various experimental conditions, which included varying the amount of aspatic acid additive, the amount of NH₄OH added, the reaction time, the reaction temperature, the stirring speed, and the type of dissolved acid. The XRD, SEM, and size distributions were analyzed and the vaterite content was calculated. Spherical precipitated calcium carbonate with a vaterite content of 95.9% was synthesized by adding 0.1 mol aspatic acid/1 mol CaO and 2 cm³ of NH₄OH, and reacting for 1 h at 25℃ while stirring at 600 rpm. The average particle diameter was found to be 12.11 ㎛. Calcium carbonate contatining high vaterite is used as high value added calcium carbonate for medical, food, inke additiver, etc.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.2
• /
• pp.144-147
• /
• 2000

Purpose : The purpose of this study is to evaluate the usefulness of arthroscopy in the management of septic coxitis in adults. Materials and Methods : The subjects were 9 patients ranging from 46 to 61 years of age. All patients were diagnosed to have septic coxitis by arthrocentesis and laboratory tests. Operative arthroscopy of the hip has been performed on the patients under supine position. All patients had a follow-up period of more than 12 months by checking ESR and CRP, and by evaluating the function with Harris hip scoring system. Results : The laboratory abnormalities returned to normal level in average of 11.9 days after the surgery. Twelve months after the surgery, all patients showed normal functional hip without any discomfort. Conclusion : Arthroscopic debridement and irrigation technique seem to have more advantages than open drainage in the management of septic coxitis minimizing the morbidity of the hip joint, while it obtains the same results as open technique.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.51-51
• /
• 1995

혐기성 미생물의 특징은 성장 속도가 느리고 침강성이 좋지 않다는 점이다. 이 문제의 한 해결책인 막결합형 혐기성 소화는 고액분리를 완전하게 수행함으로써 미생물의 유출을 방지하여 반응조 내부에 미생물을 고농도로 유지할 수 있을 뿐만 아니라 에너지의 회수와 설비 면적의 축소 등 많은 장점이 있다. 이 막결합형 혐기성 소화의 경제성은 사용된 분리막의 투과 속도에 의해 크게 좌우된다. 분리막의 투과 속도에 영향을 미치는 인자로는 미생물 및 유입수를 비롯한 반응조 내부의 상태, 막모듈 압력 온도 막면유속 등의 운전 조건이 있다. 또한 사용되는 분리막 자체의 재질도 투과 유속에 큰 영향을 미친다. 본 연구의 목적은 관형의 지르코니아 스킨층과 탄소 소재 지지층으로 이루어진 복합 재료 분리막과 폴리프로필렌 분리막을 이용하여 막재질에 따른 막오염 특성을 비교 분석하고 효과적인 투과율 회복 방법을 확립하는 것이다.

• Clean Technology
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2004

In this study, the performance of Aluminium foil etching waste(PWF100) as a cohesive agent was estimated and the methods to commercialize it were investigated through comparison of physical properties between Aluminium foil etching waste(PWF100) and commercial cohesive agent(PAC17). The height of sediment bed was measured according ot the change of the concentration of BKN-100, BKR-110, and BKR-120 prepared by using PWF100. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the heights of sediment bed were constant after decreased. Also, the density of sediment bed was investigated according to the change of the concentration of BKN-100. When the concentrations of BKN-100 were increased, the densities of sediment bed were decreased. In addition, based on the concentration of BKN-100, BKR-110, and BKR-120, the sediment rate was experimented. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, sediment rates were rapid and then slow. Moreover, the volumes of sediment bed were measured according to the change of the concentration of BKN-100. According to increasing the concentrations of BKN-100, the required time for getting to the minimum volume of sedment bed were reduced and then increased. Lastly, the required time for sedimentation based on the concentration of BKN-100, BKR-110, and BKR-120 was investigated. When the concentrations of BKN-100, BKR-110, and BKR-120 were increased, the required times for sedimentation were increased after decreased. From these results, it can be concluded that the PWF100 acts as a cohesive agent.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.664-669
• /
• 2019

Yeonpyo-beob is a method of manufacturing pigments using bamboo trunk and glue solution. Glue solutions of concentrations 1, 5, and 10% were employed to manufacture pigments, and the characteristics of pigment manufacturing were analyzed according to these concentrations. The pigment manufacturing process can be divided into holding and drying phases. The holding phase involves the sedimentation of relatively large particles, whereas the drying phase involves the sedimentation of small particles. The layers formed during the drying phase have almost similar forms regardless of the concentration of the glue solution. If the concentration of the glue solution is low in the holding phase, the particles are mixed and the formation of a layer is difficult. In contrast, when the concentration of the glue solution is higher, the layer of the pigment is more distinct. These results confirmed that the differences in viscosity due to the variation in the concentration of the glue solution affect the sedimentation velocity of the pigment particles, thereby affecting the formation of the layer of the pigment and the pigment manufacture. Consequently, applying 10% glue solution to reduce the sediment velocity is deemed suitable for the stratification of the pigment particles and the manufacture of pigments.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.75-89
• /
• 2002

The effect of addition of inorganic salts in polyethersulfone (PES) polymer solution on the membrane formation and ultrafiltartion performance was studied through the thermodynamic and kinetic properties of casting solution. To control the thermodynamic and kinetic properties of casting solution, various inorganic salts $[CaC1_2, LiCl, LiClO_4, ZnC1_2 $and Mg(ClO_4)_2]$ were added in the PES/NMP solution. Variation of membrane morphology and performance of the resulting membranes with change of the salt type and content added in tasting solution were discussed using viscosity, coagulation value, light transmittance measurement, overall membrane porosity, ultrafiltration experiment and cross-sectional SEM image. For all kind of inorganic salts, according as increase of the salt content in casting solution, viscosity is increased, coagulation value becomes lower, top layer thickness below the skin surface is increased, bovine serum albumin(BSA) rejection decreased and pure water flux is increased except $CaC1_2$ and LiCl. In case of $CaC1_2$ and LiCl, it is found that when the salt content is increased, the formation of macrovoids is suppressed and the precipitation rate becomes slow while instantaneous demixing of precipitation type is maintained. However, in case of $LiClO_4$ and $Mg(ClO_4)_2,$ it is found that precipitation rate becomes faster.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.890-898
• /
• 2022

Dispersion of suspended sediment, caused by coastal and marine development, is a key item in assessing marine environmental impact as it adversely affects marine life by increasing the level of turbidity and decreasing the amount of sunlight in seawater. However, its estimation has not been reliable because of the absence of a standard for the data measurement and divergent approaches to the impact assessment. In this study, we examined the estimation models from 58 Marine Environmental Impact Statements (MEISs, 2012-2014) to identify the gaps in the assessment and devise ways of improving the estimation. We developed four index items-grid system; unit load, particle size, and settling velocit-to evaluate their reliability in the estimation. The mean reliability score of each index was overall low-25 for grid system, 60 for unit load, 34 for particle size, and 17 for settling velocity. To ensure high reliability, it is important to develop a standard guideline that defines precise measurement of suspended sediment for unit load and settling velocity by particle size, followed by a grid system with compatible size for modelling. This can improve the estimation and thus underlie coherent impact assessment of suspended sediment dispersion on marine environment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.362-371
• /
• 1995

This study describes with the sinking behaviour for the purse seine. The experiment was carried out using three model purse seines of knotless netting. The nettings were woven in same leg length(10.5mm) of polypropylene 170 denier, polyamide 210 denier and polyester 250 denier two thread ply twine, each of the seines were named PP seine, PA seine and PES seine. Dimension of Purse seine models were 420cm for corkline and 85cm for seine depth, each models rigged 65.8g, 50.6g and 35.8g(weight in water) of lead for a leadline, seine models will have the same weight in water. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. The results obtained were as follows: 1) Netting bundle for PP seine was existence on the surface of the water, spread out a netting by sinking force of sinkers. 2) Netting bundle for PES seine was existence in the middle of corkline and leadline. 3) Average sinking speed of seine margin was fastest for 10.7cm/s of PP seine, followed by 9.7cm/s of PA and 9.2cm/s of PES seines. 4) In all seines, the force of horizontal movement for the seine setting was values of ranged in disregard.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.372-378
• /
• 1995

This study describes an analysis on the sinking characteristics in purse seine. The experiment was carried out using three simplified model seines in a flume tank under still water condition. The densities($\rho$) of netting materials were 0.91g/$cm^3$ for PP seine, 1.14g/$cm^3$ for PA seine and 1.38g/$cm^3$ for PES seine. Differential equations were derived from the conservation of momenta of the model seines and used to determine the sinking speeds of the depths of leadline and the other portions of seines. An analysis carried out by simultaneous differential equations for numerical method by subroutine Runge-Kutta-Gill. The results obtained were as follows: 1) Sinking speed of net margin was fastest for PP seine, followed by PA and PES seines. 2) The coefficient of resistance for netting of seine was estimated to be $K_D=0.061({\frac{\rho}{{\rho}_w}})^4$. 3) The coefficient of resistance for netting bundle of seine was estimated to be $C_R=0.91({\frac{\rho}{{\rho}_w}}$. 4) In all seines, the calculated depths of leadline closely agreed with the measured ones(meas.=0.99cal.).