Search | Korea Science

Park, Sung-Wook;Park, Hyuck-Jin
- The Journal of Engineering Geology
- /
- v.21 no.1
- /
- pp.1-13
- /
- 2011
Joint roughness is one of the most important parameters in analysis of rock slope stability. Especially in probabilistic analysis, the random properties of joint roughness influence the probability of slope failure. Therefore, a large dataset on joint roughness is required for the probabilistic analysis but the traditional direct measurement of roughness in the field has some limitations. Terrestrial LiDAR has advantagess over traditional direct measurement in terms of cost and time. JRC (Joint Roughness Coefficient) was calculated from statistical parameters which are known from quantitative methods of converting the roughness of the material surface into JRC. The mean, standard deviation and distribution function of JRC were obtained, and we found that LiDAR is useful in obtaining large dataset for random variables.
https://doi.org/10.9720/kseg.2011.21.1.001 인용 PDF KSCI

Kim, Soochul;Park, Youngman
- Conservation Science in Museum
- /
- v.7
- /
- pp.43-51
- /
- 2006
From the low swamp remains in Sinchang-dong, Gwangju, a number of wooden lacquerware along with various wooden artifacts were excavated. These excavated lacquerware have deteriorated and weak wooden parts and the lacquer layer come off from the wooden parts; they are very likely to peel off and crack. Therefore, we impregnated the lacquerware in PEG#4000 40% solution that was effective for vacuum freeze drying and finished freeze-drying below 0°…. We compared the weight of wood and lacquerware right after the freeze-drying with the weight after leaving them in a airtight space with 60% RH (relative humidity). The comparison results showed no change in weight; thereby we confirmed controlling the finishing temperature during freeze-drying could control the moisture in wood after drying and it could stabilize wood against the change in moisture in the atmosphere. according to the analysis of the lacquer fragment, the base layer was pasted on the wooden surface with mixed black pigment and the upper layer was pasted three or four times with the mixture of lacquer and black pigment; or it was pasted without the black base coating.
https://doi.org/10.22790/conservation.2006.7.0043 인용 PDF

Kim, Soochul;Yi, Younghee;Lee, Hyosun
- Conservation Science in Museum
- /
- v.7
- /
- pp.53-62
- /
- 2006
The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).
https://doi.org/10.22790/conservation.2006.7.0053 인용 PDF

Jang, Eun Jeong;Park, Jung Hae;Kim, Soo Chul
- Journal of Conservation Science
- /
- v.31 no.2
- /
- pp.125-130
- /
- 2015
Specific techniques and materials in conservation of traditional lacquer has not been transmitted. This study aims to compare the basic characteristics of the filler which used in the base layer of lacquer conservation. Tohoe(a mixture of lacquer and Clay) and the three kinds of additives which is mixed with Tohoe and Goksu(a mixture of lacquer, wood powder and rice starch) are estimated in drying rate, impact resistance, abrasion. Among those samples, the more amount of clay causes fast dryness speed and worse cracks on the surface. The impact resistance is weakened at high amount of clay. There is no significant differences of impact resistance between both additives that is mixed with the samples and additives. The samples that are mixed with Goksu and additives show high impact resistance. In the polishing test, the more amount of filling powders show higher grinding degree and the sample that are mixed with wood powder and charcoal show higher degree as well. The highest grinding degree is Maekchil and Goksu but the lowest one is the sample of the rooftile powder mixture.
https://doi.org/10.12654/JCS.2015.31.2.05 인용 PDF KSCI