• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.347-353
• /
• 2023

Currently, soldiers enlisted in the military (Army) are receiving measurements (automatic, manual) of body parts and trying on sample clothing at boot training centers, and then receiving clothing in the desired size. Due to the low accuracy of the measured size during the measurement process, in the military, which uses a relatively more detailed sizing system than civilian casual clothes, the supplied clothes do not fit properly, so the frequency of changing the clothes is very frequent. In addition, there is a problem in that inventory is managed inefficiently by applying the measurement system based on the old generation body shape data collected more than a decade ago without reflecting the western-changed body type change of the MZ generation. That is, military uniforms of the necessary size are insufficient, and many unnecessary-sized military uniforms are in stock. Therefore, in order to reduce the frequency of clothing replacement and improve the efficiency of stock management, deep learning-based automatic measurement of body size, big data analysis, and machine learning-based "Personalized Combat Uniform Automatic Recommendation System for Enlisted Soldiers" is proposed.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.506-508
• /
• 2006

대량의 물품이 생산되고 유통되는 현대 사회에서 개인에게 다양하고 편리한 서비스를 제공하기위해서 다방면에서 연구가 진행되고 있다. 상품을 구입 시에 사용자가 사용하는 스마트카드에 개인의 신체 치수 정보가 담겨있다면 그 사용자는 카드를 reader하는 기기에 접속하기만 하면 사용자가 필요로 하는 물품을 추천 받을 수 있을 것이다. 사람의 신체는 모든 부분을 식별할 수 있는 다양한 물리적 측정 기준을 가지고 있다. 이에 맞물려 스마트카드는 신체 식별정보 저장하기위한 적절한 저장장치이고, 관련된 컨텐츠와 자바 애플릿의 검색 및 업데이트가 용이하다는 장점이 있다. 이 논문의 연구 과제는 브라우저와 자바 임베디드 스마트카드사이의 접근 인터페이스를 설계하는 것이다.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.39-48
• /
• 2023

This study was conducted to provide a solution to the problem of sizing errors occurring in online purchases due to discrepancies and non-standardization in clothing sizes. This paper discusses an implementation approach for a machine learning-based recommender system capable of providing personalized sizes to online consumers. We trained multiple validated collaborative filtering algorithms including Non-Negative Matrix Factorization (NMF), Singular Value Decomposition (SVD), k-Nearest Neighbors (KNN), and Co-Clustering using purchasing data derived from online commerce and compared their performance. As a result of the study, we were able to confirm that the NMF algorithm showed superior performance compared to other algorithms. Despite the characteristic of purchase data that includes multiple buyers using the same account, the proposed model demonstrated sufficient accuracy. The findings of this study are expected to contribute to reducing the return rate due to sizing errors and improving the customer experience on e-commerce platforms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.616-622
• /
• 1999

The primary objective of pulp treatment is to maintain the integrity and health of the oral tissues. The most important and difficult aspect of pulp therapy is determining the health of the pulp, or its stage of inflammation, so that a decision can be made regarding the best form of treatment. Immature permanent teeth are good candidates for many pulp healing procedures, due to their rich blood supply, which is believed to enhance the pulp's ability to react successfully to various insults. Healing was considered to have taken place when the tooth fulfilled the following criteria: 1. Abscence of clinical symtoms 2. Radiographic evidence of dentin bridge formation 3. No intrapulpal or periapical pathosis was evident radiographically 4. Continued root development and closure of the apex in immature teeth 5. Normal dentin apposition in mature teeth 6. Positive response to electrical pulp test This presents a report of cases in which immature permanent teeth, pulp-exposed by caries or trauma, was treated successfully by partial pulpotomy.

• Restorative Dentistry and Endodontics
• /
• v.28 no.6
• /
• pp.475-484
• /
• 2003

동통조절을 위해 국소마취제는 치과임상에서 광범위하게 사용되어진다. 가장 널리 쓰이는 국소마취제는 리도카인이고 이는 마취효과의 지속 및 지혈효과 등의 목적으로 혈관수축제를 포함하고 있다. 대표적 혈관수축제인 에피네프린은 임상에서 1:300,000에서부터 1:50,000의 농도로 다양하게 사용되어진다. 수복치료를 위해서는 통상적으로 1:100.000농도의 에피네프린이 사용되고 있고 외과적 근관치료시 지혈효과를 위해서는 1:50,000농도의 에피네프린이 추천되고 있다. 이들 농도의 에피네프린을 포함한 리도카인으로 국소마취시 에피네프린의 농도가 치수의 혈류 및 치은의 혈류에 미치는 영향을 이해할 필요가 있고 그 영향이 전기치수검사에 대한 치수의 반응성에 미치는 영향도 이해할 필요가 있다. 따라서 혈관수축제를 포함한 국소마취제에 의한 치수혈류의 변화와 치수신경의 반응성을 이해하는 것은 중요하다 하겠다. 본 연구의 목적은 두 가지 농도의 에피네프린을 포함한 국소마취제로 마취시 나타나는 치수 및 치은의 혈류 변화를 치수신경의 반응성과 비교, 관찰함으로써 국소마취제가 치수 및 치은에 미치는 영향을 파악하고자 함에 있다. 24세에서 27세까지의 10명의 피검자의 건전한 상악중절치를 시험에 이용하였다. Laser Doppler flowmeter의 probe을 고정하기 위한 splint를 간접법으로 인상용 putty를 이용하여 제작하고 치수 및 치은의 혈류량, 그리고 전기치수검사에 대한 반응성을 측정하기 위한 3개의 구멍을 만들었다. 피검자를 10분간 안정시킨 후 마취 전 10분간 정상 혈류량과 전기검사치를 측정하고 1:50,000 epinephrine과 1:100,00 epinephrine이 각각 함유된 2% 리도카인 용액 0.9 ml를 상악 좌측 중절치 치근단부위 협점막에 침윤마취하였다. 마취 후 70분간 치수 및 치은 혈류량을 laser Doppler flowmeter를 이용해 연속적으로 측정하여 그 수치를 컴퓨터에 저장하였고, 매 5분 간격으로 전기치수검사를 시행하여 그 측정치를 기록하였다. 매 시간 간격의 평균 혈류량을 정상 혈류량에 대한 백분율로 나타내고, 각각의 농도에서 최소 치수 및 치은 혈류량을 Paired t-test, Wilcoxon's signed rank test. Duncan's multiple range test. Fisher's exact test등을 이용. 통계분석 하여 다음과 같은 결과를 얻었다. 에피네프린이 함유되어 있지 않은 리도카인을 협점막에 주사시 혈류변화가 거의 나타나지 않았으나 1:50,000 및 1:100.000 에피네프린이 함유된 2% 리도카인을 협점막에 침윤마취시 치수 및 치은 혈류 공히 현저히 감소하였다(p<0.01). 1:50,000 에피네프린군은 1:100,000 에피네프린군에 비해 치수 혈류량이 현저히 억제되어 나타났으나(p<0.01), 치은 혈류량에서는 유의성 있는 차이를 나타내지 않았다(p>0.05). 두 농도의 에피네프린 군 공히 치은혈류는 치수혈류에 비해 유의하게 많은 감소를 나타내었다(p<0.05). 1:100,000 에피네프린 군에서 마취액 주입 후 치수혈류 최대감소가 가장 먼저 나타났고 이어서 전기검사에 대한 치수의 반응성 소실 및 치은혈류 최대 감소의 순으로 나타났다(p<0.05). 1:50,000 에피네프린군의 경우가 1:100,000 에피네프린군의 경우에 비해 마취지속시간이 길게 나타났으나 유의성은 없었다(p>0.05).

• Archives of design research
• /
• v.12 no.1
• /
• pp.157-166
• /
• 1999

With the increase in use of the computer, the VCT syndrome has occured as a new socialJhea/health problem. ErgonomicaI design standards are a for the users to reduce stress and poor physical posture in the human body. In this study. we have suggested design dimensions recommended from previous studies. We also have reviewed users' preference dimenision, and analyzed differences between users' preference dimenision. and the previous design aiteria to verify physical appropriateness. We analyzed how each design dimension was reached and affected the tunan body by objective EMG evaluation. and subjective evaluation of physical discomfort and oorrIort. We have found that keyboard height is very important in a workstation. If the elbow's height is lower than the keyboard's height. it effedS the hand and wrist. If higher, it brings fatigue to the shoulder and neck. As a result of this experiment. we suggested that the height of a keyboard desk for Koreans be 660mm for the fixed type and 540-774mm for the adjustable type. Also other design reoommendations were suggested in the thesis. In ooncIusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design flekIs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.659-664
• /
• 2004

Dens invaginatus is a developmental variation resulting from invasination of the tooth crown of root before calcification. Teeth most affected are maxillary lateral incisors. The malformation shows a broad spectrum of morphologic variations and frequently results in early pulp necrosis. Root canal therapy may present severe problems because of the complex anatomy of the teeth. So, the early diagnosis of such malformation is crucial and a preventive approach has been recommended. This report describes three cases of dens invaginatus treatment.

• 보존과학연구
• /
• s.11
• /
• pp.221-233
• /
• 1990

4종의 상태가 좋은 그리고 2종의 열화된 수침 침엽수재(Pinus massoniana,Pinus.densiflora, Cunninghamia lanceolata, Crypto meria japonica)를 PEG400과PEG4,000용액으로 처리하였다. 모든 종이 안정화처리에 똑같게 반응을 보였다. 전체적으로 건전재나 약간 열화된 수침재는 PEG400 20%용액으로 처리한 결과 치수안정화가 달성되었다. PEG4,000의 50%용액으로 처리한 목재의 건조에 대한 수축은 심하게 열화된 목재에 대해 열화되지 않은 목재에서는 1/2에서 1/3정도 감소하였다. 엄격한 상관관계가 최적안정화를 위해 PEG와 목재의 밀도간에 존재한다. 최적으로 처리된 목재는 86%상대습도 이하에서는 축축하게 되지 않는다. PEG400과 PEG4,000으로 처리한 2단부함침이 황해에서 구조된 중국 정크선의 목재를 안정화시키는데 대해 추천된다.

• Archives of design research
• /
• v.12 no.3
• /
• pp.73-80
• /
• 1999

Many domestic users complain about severe pain to the waist, neck, and shoulder as well as work performance because the domestic chair design was developed with western anthropometry dimension and design criteria. Ergonomic design standards are needed for office chair design to reduce stress and poor physical posture for various user body types. In this study, we have suggested design dimensions recommended from previous studies and Korean anthropometry data. We also have reviewed users' preference dimension through measured subjects and analyzed differences between users' preference dimension and the previous design criteria to verify physical appropriateness. We evaluated general office chairs and adjustable chairs which can adjust to fit each person. we also analyzed how each design dimension was reached and affected the human body by evaluation of physical discomfort and comfort. We have found seat height is very important in a workstation. If the seat height is high, it effects the thigh. If width, height, and angle of the backrest are wrong, fatigue to the shoulder, neck, and waist, etc.. As a result of this experiment, we suggested that the height of a seat for Koreans be 425mm for the fixed type and 365-484mm for the adjustable type. Also other design recommendations were suggested in the thesis. In conclusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design fields.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.63-76
• /
• 1997

To investigate the engineering characteristics of crushed rockfill material, the large-scaled triaxial tests have been carried out, The rpckfill is made from the greywacke, and the 3 parallel gradations with different maximum particle size(dmu=38.1mm, 25.4mm and 19.1mm) were designed for the test. The dimension of the specimen is 300mm in diameter and 600mm in height, and the applied confining stress varied from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$. The test results show that the influence of the maximum particle size on the stress -strain r$51.6^{\circ}\; to\; 40.5^{\circ}$ when the confining stress increases from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$ The hyperbolic parameter values estimated from the test result for rockfill are much different from the recommended values by Duncan et. at(1980) for GW and GP material, especially in the $\phi$ ad K-values.