• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.37-45
• /
• 1991

The purpose of this study is to establish the geodetic control points of GPS in Korea and estimate a measurment ability of GPS for the long baseline. For this, we performed the simultaneous GPS observations at two points in Korea and one point in Japan, and analized the precision of GPS survey according to the data process methods. As the results, three dimensional coordinates of two points in Korea are precisely established on basis of WGS 84 coordinate system and it is demonstrated that the measurement ability of GPS is 0.1 ppm for long baseline. We expect that in the future this result will be used as the basic data for securing the geodetic control points of GPS in Korea.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.161-178
• /
• 2009

The introduction of a world geodetic system for cadastral survey will be started the enactment of the law on survey, hydro-graphical examination and cadastre. However, the cadastral control points are not homogeneous and correspond with national control points because of various reasons. To cope with this problem, the 1,600 high accurate control points, which can be interlocked with national GPS control points, has selected from existing 20,000 cadastral control points. These selected control points were calculated as an accurate world geodetic system and it makes a homogeneous cadastral survey network. Through these measures, for the future carrying out national project, this study will be effectively contributed to establish the cadastral infrastructures for the Korea cadastral reform project.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.1-6
• /
• 1989

The adjustment of levelling net is being done to the order of nets independently by using the least square method. For the small size net, it has difficulties in verification and statistical analysis of the net since the degree of freedom is low At the same time, it is also difficult to evaluate the error of lower order net correctly. The aim of this study is to analyse the properties of combined adjustment method compared with the independent adjustment method by using the data which have been measured during 1967-1987. Another aim is to analyse the influences of normal orthometric correction and changes of datum. Finally, Korean leveling net has been evaluated by applying real redundancy and variance component estimation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.309-317
• /
• 2007

Cadastral control points in Korea are refered to various origins, for example an early separated small triangulation, a separated small triangulation, a separated control surveying origin and an unified origin. Cadastral map with early separated small triangulation origin have difficulties to connect with national GIS data by refered an unified origin. We determined transformation parameters from old origin to unified origin using 2D conformal transformation method. To evaluate of transformation accuracy, we compared with GPS field surveying results. And we experiment on coordinate transformations with unified results between the local geodetic datum and the new Korea geodetic datum.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.337-344
• /
• 2006

KVN simulation, which is focused on evaluating the impacts of KVN to geodetic VLBI network, was performed. The KVN is under construction with three radio telescopes VLBI system for radio astronomy and space geodesy. To distinguish the impacts of KVN on global and local scale networks, we designed two different sizes of VLBI networks, namely, KVN-Asia and KVN-Pacific. While the former consisted of Far East Asia region VLBI stations, the latter consisted of pacific region VLBT stations. The primary purpose of our simulation is quantitative evaluation of KVN impacts before and after the participation of KVN in the previous two virtual networks. We selected two different sets of parameters to be estimated in the simulation as indices of evaluating estimation precision: station coordinates and EOPs. The station coordinates are evaluating index for KVN-Asia and the EOPs are another evaluating index for KVN-Pacific. From the simulation results of comparisons between evaluating indexes, 50% and 20% of maximum improvements for KVN-Asia and KVN-Pacific were anticipated respectively. We expect that the space geodetic use of KVN will be focused on the several promising research fields which are proposed through the simulation results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.107-113
• /
• 1995

Generally, the objectives of the geodetic network adjustments are for solving the configuration of geodetic net-works and the problem of observation plans. In this study, assuming that the configuration is fixed, for improving the accuracy of geodetic networks, we focus on choosing adjustment control points and adjustment methods. By choosing adjustment control points and adjustment methods, the adjustment result accuracy of national geodetic networks can be different. So, in this study, we introduce the algorithm that use free network adjustment concept to minimize the displacements of new station points but fixing existing control points. Then, us-ing adjustment results, we can check the errors of existing control points. After checking the errors of existing control point, in case of severe error points in existing control points, we change those points into unknown station points and repeat the algorithm to optimize the coordinates of new station points. As applying this algorithm to simulation network, we can check the errors of existing control points. And changing severe error points into unknown station points, we can decrease the errors of network and optimize the coordinates of new station points. From the results of simulation network adjustment, we think that, as applying this algorithms to sequential adjustment of geodetic network and public surveying that using national geodetic network, the accuracy of network adjustments can be improved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.241-247
• /
• 2012

The national geodetic reference frame of Korea switched to the International Terrestrial Reference Frame (ITRF) in 2003. In order to study the land area changes, we calculated the entire land area of Korea using the administrative boundaries of census data provided by Statistics Korea. The standard transformation procedure by the National Geographic Information Institute (NGII) was followed. The Transverse Mercator (TM) projected coordinates were transformed into the GRS80-based world geodetic reference frame, and the ellipsoidal and the projected areas were calculated. The provinces that range over two projection origins were divided into two polygons and projected using appropriate origins. After the transformation, all boundaries were shifted in the northwestern direction, resulting in a decreased area of $1.36km^2$ (about 0.0013%) on the projected plane. Moving the boundaries into a high latitude area cancels out the effect of the enlarged ellipsoid. In addition, the rate of change shows that a higher-latitude province is more sensitive to the shift of the boundaries. The data by Statistics Korea is significantly different from those of the Ministry of Land, Transport and Maritime Affairs (MLTM), thus it is urgently recommended that the data are integrated and unified.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.79-85
• /
• 2008

This study aims to derive a practical coordinate transformation method for the existing geographic information database. After analyzing the status and problems of existing 1/1,000 digital base map and GIS application database, the transformation parameters are estimated and the accuracy of the transformation is determined based on the transformed coordinates. We analyzed the accuracy of a transformation using the published national transformation coefficients as well as the estimated local transformation coefficients using national and urban control points in a study area. In addition, the 1/1,000 digital base map from aerial triangulation is compared with respect to the coordinates of urban control points. Based on the comparison, the biases on the national control points which were used at the time of digital map generation was analyzed. Then, the accuracy of transformed coordinates based on the world geodetic system using local transformation coefficients estimated from urban control points are determined. We also analyzed the transformation accuracy of underground infrastructure database using the same transformation method as the case of 1/1,000 digital base map. Through this study, it was found that the estimation of transformation coefficients by Molodensky-Badekas using urban control points was suitable for a local government. Furthermore, it was obvious that the accuracy of a 2-dimensional affine transformation was comparable to that of 7 parameter transformation for a local area. Applying the coordinate transformation and bias correction, we could transform GIS application database which was built by an offset surveying based on digital base map within the transformation accuracy of 10 cm. Therefore, it was judged that there will not be a big problem on the transformation of the GIS DB to the world geodetic system.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.18-30
• /
• 1999

This study was carried out to compare the characteristics of hydraulic architecture by measurement of leaf specific conductivity(LSC) in the twenty-one deciduous broad-leaved species. The LSC's of stems were higher than in branches except Acer mono, A. triflorum, Betula schmidtii, Fraxinus rhynchophylla and Zelkova serrata, and lowest in junction parts as compared with stems and branches. In diffuse-porous species, the LSC was much higher in B. plalyphylla var. iaponica, B. schmidtii, Cornus controversa, Tilia amurensis than those of other species and especially lowest in A. triflorum. In ring-porous species, the LSC was much higher in Maackia amurensis, Paulownia tomentasa, Quercus aliens, Q. serrata than those of other species and lowest in Ulmus davidiana var. japonica. The LSC's of 1-year-old terminal shoots of stem(the leader and adjacent laterals) in A. triflorum, C. controversa. F. mandshurica, Q. mongolica and Z. serrata ranged from 22 to $139{\mu}{\ell}/g$ in the leaders, and 11 to $73{\mu}{\ell}/g$ in the adjacent laterals. The LSC's of leaders were usually greater than the adjacent laterals because of the hydraulic dominance of the leader shoot.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2009

According as standard of measurement is changed to world geodetic system by surveying law revision, we need to transform previous 1/1,000 digital maps as a standards of world geodetic system. And, we should acquire standard strategy to minimize confusion and error by conversion of geodetic surveying standards. Thus, conversion of digital maps must be transformed efficiently and consistently according to notice of relevant standard. As common point, we have used 1/1,000 digital map and local geodetic system coordinates and world geodetic system coordinates that had been used in UIS business of Pusan city and, make a analysis of distortion quantity using KASM Trans Ver 2.2. As the result of distortion quantity calculation about all Pusan city, numbers of area that error is over 0.05m are 35 in case of X(N) and 43 in case of Y(E). Because some business section have especially much error, we divided into 3 areas, that was A,B,C, and analyzed. As a result of analysis, errors of more than 0.05m are occurred only 1 X(E) in the B area and 1 X(N) and 1 Y(E) in the C area. In conclusion, We think It is a good method that we consider a distortion quantity and divide a region, and transfer to world geodetic system for large area like Pusan city.