• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.227-238
• /
• 2010

Objective: The purpose of this study was to analyze the effect of growth hormone treatment (GHT) on craniofacial growth in children of short stature. Methods: Nineteen untreated children of short stature were referred from the Pediatric Department, Yeungnam University Hospital as a subject group. All subjects had lateral cephalograms taken before, after 1 year and after 2 years of growth hormone treatment. As a reference group, we selected 19 normal children with paired sampling who matched the subjects' age and sex, from the Department of Orthodontics, Kyungpook National University Hospital. Results: Before GHT, anterior cranial base length and upper posterior facial height, posterior total facial height, mandibular ramus length, and mandibular corpus length were significantly smaller in the reference group. In angular craniofacial measurements, saddle angle and mandibular plane angle were larger. SNA and SNB were smaller in the reference group. After two years of GHT, growth hormone accelerated growth in several craniofacial components. The posterior total facial height, the anterior, posterior cranial base length, and the mandibular ramus length were increased. And the difference in mandibular plane angle and ANB values compared with the reference group was decreased. Conclusions: GHT over 2 years leads to a craniofacial catch-up growth tendency, which is pronounced in interstitial cartilage and condylar cartilage.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.262-269
• /
• 2010

Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.2
• /
• pp.77-91
• /
• 2004

본 연구의 목적은 반안면왜소증 환자의 하악골 신장술시 초기 치아골격 특성들 중에서 치료결과의 차이에 기여하는 인자를 찾는 것이다. 치료전의 치아골격 특성, 골신장술의 효과와 그 유지상태를 관찰하기 위하여 골신장술 직전(T0), 직후(T1), 추적 2년후(T2)에 측모와 정모 두부방사선 계측사진을 촬영하여 전후방, 수직치아, 비대칭 항목들을 계측하였다. T2 시기의 계측 결과에 따라서 환자들을 1군(양호군, 10명)과 2군(불량군, 9명)으로 분류하였다. 두 군에서 각 시기와 T0-T1, T1-T2 동안의 변화량의 차이를 Mann-Whitney U test, Wilcoxon signed independent t-test, rank test, ANOVA test를 사용하여 분석하였다. pruzansky type이 골신 장술의 성공과 실패 여부와 관계가 깊게 나타났다. T0 시기에 2군은 1군에 비하여 하악골이 후방위치되었고, 하악지 고경(ramus height)이 짧았고, 하악각(gonial angle)이 컸으며, 이환측 하악지가 내측경사되었고, 이환측으로의 이부변위(chin point deviation)가 크게 나타났다. 1군에서 골신장술의 주요한 효과는 하악지 고경의 증가, 하악골의 전방위치, 하악각의 증가, articular angle의 감소에 따른 하약골의 반시계방향 회전, 이환측의 하악지 경사의 증가, 교합면경사와 이부변위의 개선으로 나타났다. 그러나 2군에서는 골신장술을 시행했을 때 1군에 비하여 하악골이 시계방향으로 회전되었고 하악지 고경의 증가량이 작게 나타났다. T2 시기에 2군에서는 하악골의 반시계방향 회전이 나타났고, 하악지 성장이 일어나지 않았으나, 1군은 반대의 경향을 보였다. 이러한 인자들이 골신장술 결과의 차이에 기여하는 것으로 생각된다.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.37 no.6
• /
• pp.421-431
• /
• 2007

The objective of this study was to provide guidelines for the diagnosis and successful treatment of orthodontic treatment with upper premolar extraction only Methods: The sample group consisted of 40 patients (20 with upper premolar extraction only, 20 with both upper and lower premolar extractions) who showed an overjet of more than 7 mm and were finished successfully. Lateral cephalographs were taken before and after orthodontic treatment. Landmarks showing the position of the upper and lower incisors and the position of the upper and lower lip were determined and angular measurement of these values were obtained for statistical analysis (Mann-Whitney test). Results: At pre-treatment, the position of the lower incisor was less labially inclined and the convexity of the lower lip was smaller in the upper premolar extraction only group than in the upper/lower premolar extraction group. At post-treatment, there was no difference in all measurements except for the position of the lower incisor. A comparison of changes between pre- and post-treatment showed that the retraction of upper & lower incisors and the decrease in convexity of the lower lip were greater in the upper/lower premolar extraction group. Conclusions: Treatment by upper premolar extraction can be of benefit for patients whose lower incisor proclination and lower lip protrusion are not excessive.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.497-505
• /
• 2004

The purpose of this study was to evaluate the post-retention stability of the lower incisor axis in Class II division 2 malocclusions. The dental casts and lateral cephalograms from before (T1) and after (T2) orthodontic treatment and long-term post-retention (T3) in 62 Class II division 2 malocclusion cases were included in this study. After several linear and angular measurements at each time were taken, the significance in the amount of change of the lower incisor axis for each gender and extraction versus non-extraction was evaluated. The results showed that the lower incisors that inclined labially during treatment were unstable and relapsed to the original lingual position in Class II division 2 malocclusions (p<0.001). There was no significant difference between extraction and non-extraction groups for the amount of lingual relapse of the lower incisors (p>0.05). There was no significant difference between male and female groups for the axial change of the lower incisors (p>0.05). As a result of multiple regression analysis, the cephalometric measurement best predicting the lower incisor position to the A-Pog line post-retention was pre-treatment L1-Apog(mm) and pre-treatment SNGoMe$(^{\circ})$. Because of the instability of labially inclined lower incisors after orthodontic treatment, the treatment goal should be the pre-treatment incisor axial position.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.43-52
• /
• 1996

The purpose of this study was to compare and evaluate the upper airway structure between the snorers and asymptomatic control subjects depending on the positional change. Lateral cephalograms in the upright and supine position were taken in 25 female snorers and 20 female asymptomatic control subjects. The length and the area of the soft palate, tongue and airway were measured and evaluated statistically. The results obtained were as follows : 1. The snorers showed longer and higher tongue, narrower and longer airway, inferiorly positioned hyoid bone, longer and broader soft palate and narrower hypopharynx than the control subjects both in the upright and supine position. In addition, the snorers showed broader tongue area and narrower oropharynx area than the control subjects in supine position. 2. Depending on the positional change from upright to supine position, the controls and the snorers showed decreased airway length and superior positioned the hyoid bone. In addition, the snorers showed decreased tongue length and height, airway length and thickness and oropharynx area, but increased tongue area and soft palate area.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.553-563
• /
• 2000

Horseshoe Expander is one of Slow Maxillary Expansion(SME) which aims to accommodate the contra- lateral expansion and midpalatal suture expansion or the palate. The appliance consists of skeleton type strew embedded in split Horseshoe appliance. It is the objectives of the presentation to manifest the changes in dental & craniofacial components subsequent to the application of Horseshoe Expander. The subjects for this study consisted of 32 patients (mean age : 12.7). frontal, lateral cephalometric headfilm were taken and study casts were fabricated before and after expansion. 24 items were measured, compared preexpansion with postexpansion. Especially, palatal volume was measured by means of 'Hydro-measurement method'. Tooth axis measurement on the dental casts were made with Universal bevel protractor, and Horseshoe Expander group were compared with RME group. This study of changes to maxillary expansion with Horseshoe Expander revealed the following significant results. 1. Triangular-shaped expansion pattern appeared in frontal cephalometric headfilm. 2. Palatal plane, occlusal plane, mandibular plane and upper incisor to FH increased in lateral cephalometrir headfilm. 3. Palatal volume increased significantly. A slight bite opening, reduction of occlusal contact points showed in dental casts. 4. A 2.2:1 ratio of the amount of intermolar width in maxilla(orthodontic movement) to maxillary width (orthopedic movement) was determined. 5. Horseshoe Expander group has less buccal tipping tendency than RME group, by taking high correlation coefficients in the upper second premolar and first molar. It was suggested that Horseshoe Expander showed less orthodontic changes, less buccal tipping tendency. In addition, it was effective in maxillary expansion.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.2
• /
• pp.105-116
• /
• 1997

The purpose of this study is to evaluate the cephalometric reproducibility in digitized cephalometric radiography by comparing the measurement errors between the remeasured and retaken conventional and digitized lateral cephalometric radiography. The mean of the differences and error percentage of each cephalometric measurement were obtained using 96 lateral cephalometric radiography from 48 patients between the age of 11 and 13. The results were as follows; 1. The repeated measurement group of conventional radiography showed least amount of mean differences while those of the retaken measurement group of digitized image showed largest amount of mean differences in every measurement. 2. The measurements which showed statistically significant difference between the conventional radiography and digitized image were S-Go, Ar-Go, S-Ar-Go and S-sN-sNT in repeated measurement group. 3. The measurements which showed statistically significant difference between the repeated and retaken measurement groups were N-S-Ar, MP-Ll and S-sN-sPog in conventional radiography and S-N, Go-Me and N-A in digitized Image. 4. Large amount of error percentage was shown at A-N-B and N-A in retaken measurement group of conventional radiography and N-S-Ba and A-N-B in retaken measurement group of digitized image. 5. The amount of error percentage at Ar-Go and N-S- Ar in retaken measurement group of conventional radiography and S-N, N-A, S-N-B and N-S-Ba in retaken measurement group of digitized image was more than double than those from remeasured groups.