• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.369-379
• /
• 2006

Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.4
• /
• pp.321-329
• /
• 2001

To establish systematic diagnosis and treatment planning of dentofacial deformity patient including facial asymmetry or hemifacial microsomia patient, comprehensive analysis of three dimensional structure of the craniofacial skeleton is needed. Even though three dimensional CT has been developed, landmark identification of the CT is still questionable. In recent, a method for correcting cephalic malpositioning that enables accurate superimposition of the landmarks in different stages without using any additional equipment was developed. It became possible to compare the three-dimensional positional change of the maxillomandible without invasive procedure. Based on the principle of the method, a new program was developed for the purpose of diagnosis and treatment planning of dentofacial deformity patient via three dimensional visualization and structural analysis. This program enables us to perform following menu. First, visualization of three dimensional structure of the craniofacial skeleton with wire frame model which was made from the landmarks observed on both lateral and frontal cephalogram. Second, establishment of midsagittal plane of the face three dimensionally, with the concept of "the plane of the best-fit". Third, examination of the degree of deviation and direction of deformity of structure to the reference plane for the purpose of establishing surgical planning. Fourth, simulation of expected postoperative result by various image operation such as mirroring, overlapping.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.250-259
• /
• 2010

Objective: Intraoral noncompliance upper molar distalization techniques have gained in popularity and have subsequently found to be successful in Class II correction. The aim of the present study was to introduce a screw supported intraoral distalization appliance and investigate its efficiency. Methods: Twenty-one subjects (11 females, 10 males; average age of 14.9 years) with Angle Class II malocclusion participated in this study. Two screws were inserted behind the incisive foramen and immediately loaded to distalize the upper first molars. An intraoral screw supported distalization appliance was used to distalize the upper molars in order to achieve a Class I molar relationship. Skeletal and dental changes were evaluated using cephalometric and three-dimensional (3D) model analysis. Results: Upper molars were distalized 3.95 mm on average and a Class I molar relationship was achieved without any anchorage loss. The upper molars were tipped only $1.49^{\circ}$ and the upper right and left molars were rotated only $0.54^{\circ}$ and $0.74^{\circ}$ respectively which were statistically non-significant (p > 0.05). Conclusions: The newly designed screw supported noncompliance distalization appliance was found to be an effective device for achieving bodily molar distalization without any anchorage loss.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.403-414
• /
• 2001

The purpose of this study was to evaluate treatment effects of the modified Teuscher appliance (MTA) in early Class II division 1 malocclusion. For this purpose, treatment effects of the bionator were compared with those of the MTA. The twenty subjects who were treated excellently with bionator and MTA were selected in each group. In pre- and post-treatment lateral cephalograms, 50 variables were measured, and then the differences between pretreatment and posttreatment data of the bionator and the MTA were statistically evaluated by t-test. The results were as follows : 1. The linear measurements that showed large difference between the bionator group and the MTA group are U1 to FH, U1 to PP, U6 to FH, U6 to PP, Ar-Pog, ramus height, L1 to A-Pog, L1 to facial plane (p<0.05). 2. The angular measurements that showed large difference between the bionator group and the MTA group are SNB, SNA, FABA, APDI (p<0.05). 3. The measurements of the growth pattern such as facial height ratio, FMA, SN-MP angle showed no difference between two groups (p>0.05). These results suggest that the bionator influence the mandiblar growth and lower dentoalveolar structures more than the MTA, and the MTA influence upper jaw and upper dentoalveolar structures more than the bionator comparatively in early Class II division I malocclusion.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.487-498
• /
• 1998

This study was conducted to investigate changes of airway size, tongue and hyoid position following orthognathic surgery in mandibular prognathism, and how they are adapted to new environment in time dependent manner. 37 patients, who had recieved orthognathic surgery, were selected for this study. lateral cephalogram of each patient was taken at preoperation, immediate postoperation, and over 6 month after operation, and were traced and analyzed The findings of this study were as follows : 1. The size of airway was not changed at PNS and Epiglottis level after operation, but it was changed slightly at 2nd cervical vertebra level. 2. The hyoid was moved inferoposteriorly at immediate postoperation, and then it shifted toward preoperative position, but it remained slightly inferoposterior position. The distance from hyoid to genial tubercle decreased continuously. 3. The position of tongue was moved inferoposteriorly at immediate postoperatioa and then it shifted toward preoperation position, but the root of the tongue remained inferoposteriorly. 4. The distance between tongue and hyoid was increased at immediate postoperation and slightly decreased during follow-up period. 5. The change of the mandibular position was not significantly correlated with changes of airway size, hyoid position, tongue morphology and tongue position.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.129-142
• /
• 1995

The purpose of this study was to estimate correlations of craniocervical posture and craniofacial morphology in Korean young adults. The sample consisted of 50 young adults (25 males and 25 females) who had good profile and Class I molar relationship. The analysis of craniocervical posture and craniofacial morphology was performed on lateral cephalograms taken in natural head position. The results were as follows, 1. The mean and the standard deviation of postural and morphologic variables were obtained. 2. Korean young adult had cervical lordosis of which degree between OPT and CVT shows $3.55{\pm}2.58^{\circ}$ 3. Craniocervical posture and each of vertical ratio, facial prognathism, mandibular rotation showed high correlation. 4. Correlation coefficients between postural variables and each of intermaxillary relation, anteroposterior ratio were low. 5. The head positioning error of natural head position was smaller than the inter-individual variability of postural variables.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.319-330
• /
• 2007

Defining right and left side differences in mandibular ramus height is one of the key elements in the diagnosis of facial asymmetry. The purpose of the present study was to evaluate the effect of correction of ramus height with frontal and lateral ramal inclinations (FRI and LRI) in 2-dimensional cephalograms and observe how this affects the diagnostic accuracy of asymmetry. Methods: Frontal and lateral cephalograms were obtained in 40 individuals with chin deviation. FRI and LRI were measured on each side and ramus height measurement was corrected with these inclinations using Pythagorean's theorem. The results of diagnosis before and after correction on cephalograms were compared with the results in 3D CT images. Results: Both FRI and LRI showed greater values in the contralateral side than in the chin-deviated side and these contributed to an increase in the right and left side ramus height differences. After comparison of diagnostic results before and after correction on cephalograms with the results on 3D CT images, the sensitivity increased significantly (from 74 to 94 %) whereas the specificity decreased (from 44 to 22 %). Overall accuracy increased from 68 to 78 % with the correction using FRI and LRI. Conclusions: The results of the present study indicate that correction of ramus height with FRI and LRI is useful for an accurate diagnosis of facial asymmetry on frontal cephalograms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.109-118
• /
• 2005

In the field of pediatric dentistry, comparison and analysis of cephalogram values of children are important fir evaluation of growth and development, and are essential to evaluate the craniofacial form and growth pattern for early diagnosis of malocclusion. For this, cephalographic norm values are important, but not many studies on the primary dentition exist. To compare the past norm values of normal occlusion in the primary dentition with current norms, preschool children, 4 to 5 years of age, with normal occlusion in the primary dentition who visited our hospital were examined. Among these children, 46 children with normal facial form and developmental status were chosen for evaluation of cephalogram values. The following results were as follows: 1. For skeletal values, the angular values showed no significant differences between males and females, and the linear values were generally greater in males than females. 2. SNA was $81.3^{\circ}$, SNB was $76.6^{\circ}$ and ANB difference was $4.7^{\circ}$. 3. The ratio for Mandibular body length to Anterior cranial base length was 0.9 : 1 for both male and female and the ratio for posterior facial height to anterior facial height was 61.4 % for male, 62.0 % for female. 4. For dental values, IMPA was $84.2^{\circ}$ and UA to SN was $90.8^{\circ}$. 5. The upper lip to Ricketts esthetic line was positioned 2.6 mm anteriorly, and the lower lip to Ricketts esthetic line was positioned 2.5 mm anteriorly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.652-661
• /
• 2008

The purpose of this study was to evaluate the skeletal and dental effects obtained by the Frankel functional regulator III in growing children with Class III malocclusions. Cephalometric changes in thirty children at the time of mixed dentition malocclusions (initial mean age, $7.9{\pm}1.1$ years; mean treatment duration, $1.5{\pm}0.8$ years) were analysed. The results were as follows : 1. The skeletal effects on the maxilla showed a significant downward displacement whereas forward displacement was not significant in comparison with the control group. 2. The skeletal effects on the mandible showed statistically significant backward and downward displacement. 3. The dental effects showed statistically significant backward movement in the mandibular incisor tip and increase of overjet The results suggested that forward displacement on the maxilla was insufficient and treatment effects were caused mainly by downward displacement of the maxilla, backward and downward rotation of the mandible, and the increase of overjet during short period.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.175-187
• /
• 1998

The purpose of this study was to predict the prognosis of class III malocclusion treatments. 25 patients selected for this study were devided into two groups by the stability of dentitional, skeletal and soft tissue profile improvement. One was stable group which consisted of 12 children and the other was relapse group with 13 children. Various measurements in initial lateral cephalogram were calculated and analyzed by t-test, correlation coefficient and discriminant analysis. The results of this study were summarized as follows 1. In both stable and relapse groups, there was not distinct difference in the antero-posterior skeletal relationship (P<0.05). 2. As the result of wits, hn to occlusal plane angle and occlusal plane to mandubular plane angle, the occlusal plane of relapse group was stepper than that of the stable group. 3. In correlation coefficient analysis, the overjet and the occlusal plane to mandibular plane angle showed significant correlations (p<0.001, p<0.01). 4. The discriminant function was obtained from three major influential measurements; overjet, AB to occlusal plane angle and articular angle, and this function could discriminate correctly in 88% of these samples.