• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.289-294
• /
• 1996

핵연료를 고밀도로 저장하고 수송하기 위한 핵연료저장대 및 수송용기등에 중성자흡수재로 사용되는 Borated Stainless Steel (BSS)의 기계적 특성에 대해 검토하였다. BSS는 사용후연료의 저장 및 수송시 중성자흡수재로서 뿐만 아니라 구조재로 사용되기 때문에 구조물의 건전성측면에서 기계적 특성은 중요하다. 본 논문에서는 BSS의 기계적 특성 중에서 붕소농도 증가 및 중성자 조사전후 재료의 인장강도 및 항복강도, 충격에너지 및 경도 등에 대해 검토하였다. BSS는 원자력 부품용 지지구조물의 구조재로서 ASME 코드화되는 경우 핵연료 저장 및 수송용기등에 널리 활용될 것으로 판단된다. 검토된 자료는 BSS를 사용하는 핵연료 저장대의 구조설계에 활용될 것이다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.27.4-27.4
• /
• 2009

이 논문에서는 100~200kg 급의 첨단 소형위성의 기계시스템 개념설계에 대하여 기술한다. 첨단 소형위성의 개발은 국가우주기술 축적을 목적으로 하고 세부적으로는 실용 및 과학위성에 적용하기 힘든 신기술 검증 및 국내 기술자립도 향상을 목적으로 한다. 이를 위하여 다수의 후보 임무 및 검증 목적 기술을 선정하고 각각에 대하여 기계시스템 측면에서 수용가능성에 대하여 개념설계를 수행한다. 이를 통하여 위성 기계시스템의 주요 규격을 설정한다. 기계시스템의 측면에서 세부적으로 검증하고자 하는 기술은 구조체의 경량화, 신소재 및 다기능 구조체 적용, 장비 배치 집적화, 대형 탑재체 탑재기술, 충격 및 진동 저감 구조, 능동형 및 팽창형 전개장치 개발 등이 해당한다. 이 논문에서의 이러한 다양한 기술을 수용할 수 있는 기계시스템에 대한 개념설계 결과를 보여준다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.604-609
• /
• 2016

슬롯판을 이용한 경사충격파와 경계층 간섭유동 제어에서, 슬롯판 아래에 있는 공동부의 형상을 바꾸어 가며 제어 성능을 비교하는 수치적 연구가 수행되었다. 공동형상 직사각형 5개, 사다리꼴 3개를 선정하여 shock 뒤에서 경계층 안정성, 전압손실을 기준으로 제어 성능을 평가하였다. 수치해석 결과 모든 형상에 대해 제어하지 않은 상태보다 좋은 성능을 얻었다. 그 중 경계층 안정성 측면에서는 형상 L과 R, 전압손실 감소 측면에서는 형상 M과 A가 효과적임을 확인하였고, 종합적으로 슬롯의 끝 면과 공동의 길이방향 끝 면이 일치하는 형상에서 상대적으로 좋은 결과를 얻음을 확인했다. 또한 슬롯과 공동 내부유동을 분석하면서 경계층 안정성과 전압손실 감소에 영향을 미치는 것은 separation 영역을 얼마 원활히 흡입하는지의 여부임을 알 수 있었고, 상류 슬롯에서 발생하는 shock에 대한 추후 해결 연구도 필요함을 알 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.1-9
• /
• 2005

The interaction between hypersonic free stream and side jet flow at high altitudes is investigated by using the direct simulation Monte Carlo (DSMC) method. In order to alleviate the difficulty associated with the large density difference between the free stream and the side jet flow and to simulate the two flows simultaneously, a weighting factor technique is applied. For validation, the corner flow over a pair of plates perpendicularly attached is calculated with and without a side jet, and the results are compared with experiment. For a more realistic configuration, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet is injected into the free stream and the effect on the aerodynamic force and moment is observed at various flow angles. The lambda shock effect and the wake structure are studied in terms of the surface pressure differential. A higher interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2341-2348
• /
• 2010

In this paper, strain and stress on space frame are analyzed at racing car under crash loads. As the deformation is reduced to a minimum during crash and the vulnerable parts are grasped, the safety of driver is ensured. The vehicle frame is modelled with truss structure by inputting the material property of carbon steel on finite element analysis. The increase of impulse momentum is due to speed change at frontal collision. This influence effected on vehicle frame is also analyzed by ANSYS program. The deformation of the frame is studied by applying the crash loads at front, side and rear directions. Though the influence on the seat of driver is small at frontal and rear crash, the deformation due to impact is progressed into this seat. The safety of frame is enhanced by making up for these weak deformations and these results of simulation analysis can be applied to the production of the actual vehicle frame.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.131-137
• /
• 2004

The impacts of electric service interruption to customers depend on customer and interruption characteristics. Customer characteristics include demographic aspects (residential type, and number of household members) and power supply types whereas interruption characteristics include frequency, duration, time, and day of interruption. Accordingly evaluation of these customer interruption costs is very complicated and subjective. For residential customers, customer survey method seems most appropriate because interruption impact to residential customers is intangible. In other. words, the value of housework or lost leisure due to interruption is individual. Accordingly, this paper selected the customer survey method to assess the interruption costs for residential customers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.116-121
• /
• 2011

Performance of Secondary Injection Thrust Vector Control system is investigated under various secondary injection operating conditions. 3-dimensional converging-diverging nozzle having 8 secondary injection nozzles is used in this numerical study. Total pressure of flow inside the nozzle is about 70bars, and total temperature set to 300K for cold flow simulation. Effect of secondary injection flow rate and injection nozzle configuration is considered in this research. Simulation is conducted with commercial CFD code Ansys Fluent v13. Spalart-Allmaras(1-equation)model is used for turbulence modeling with AUSM+ scheme. Various performance factors as Axial thrust, side force, system specific impulse ratio are considered and explained for system performance evaluation.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.47-52
• /
• 2001

Pb-free wave soldering process of AC Adapter was implemented by six sigma method using Sn-Cu-Ni type solder. The solder joint appearance, microstructural change, a lift-off phenomenon and reliability were evaluated through thermal shuck test. $(Cu,Ni)_6/Sn_5$-type intermetallic compound of which thickness is about 5 $\mu\textrm{m}$ was found at solder joint between Sn-Cu-Ni solder and copper land. After applying the thermal shock test of as-soldered product up to 750 cycles, no crack was fecund at the solder joint. The newly developed product was superior to conventional one in terms of productivity and reliability.

• KDI Journal of Economic Policy
• /
• v.33 no.2
• /
• pp.1-39
• /
• 2011

This study discusses the phenomenon behind various forms of macroeconomic volatility faced by countries in terms of industrial structure through empirical analysis, and in the process attempts to validate the role of the service industry. The analysis shows that economic fluctuations in Korea have been significantly improved, mainly due to the country risk. However, Korea is still exposed to the impact of external shocks, which is attributable to the manufacturing-centered industrial structure. Under such industrial structure, it is inevitable for the Korean economy to be continuously exposed to macroeconomic fluctuations caused by global sectoral shocks. So, in order to alleviate business fluctuations, it is necessary to enhance the role of non-tradable sectors that account for most of the service industry.