• Journal of the Korean Chemical Society
• /
• v.46 no.2
• /
• pp.125-138
• /
• 2002

The kiln at Chollanamdo Kwangjusi Ch'unghyodong, which produced punch'ong and white wares for a period of 70 to 80 years in the 15th century, is examined for their scientific technological param-eters. Punch'ong sherds were divided into seven different groups according to the location and the layer of the waste mounds from which they were excavated. Optical and scanning electron microscope were used for microstructural observations and X-ray diffraction and polarized microscope for mineral characteristics. For determining the firing temperature, sherds were refired at different temperatures and their micro-structural changes were observed. Some wares such as the group CHE2 was high quality wares fired at high emperature around 1200$^{\circ}C$ for palace use, but as the ceramics ware became more widely used and the white wares increasingly preferred over punch'ong, lower quality wares of rougher raw materials were firedat lower temperatures around 1100-1150$^{\circ}C$ in quantity. They used local raw materials of several types, all available locally.

• 한국문화재보존과학회:학술대회논문집
• /
• 2007.05a
• /
• pp.44-45
• /
• 2007

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.251-265
• /
• 1998

Punch'ong and whiteware sherds excavated from four kilns located in Ch'unghyodong, Kwangju, Chollanamdo were analyzed for their body and glaze composition. They are classified into eight different groups by the site and layer from which they were collected. In principal component analysis of major composition, the punch'ong body separates out into several different groups. CHE2, made in early fifteenth century, has a higher aluminum and lower iron content compared to the later groups of lower grade. Whiteware body has a very high aluminum content of around 30 wt. in both soft type and hard type. Punch'ong glaze was determined to be lime type and whiteware alkali-lime type.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.61-74
• /
• 2011

The material characteristics of Chos$\breve{o}$n whiteware were investigated by analyzing and comparing the body and glaze compositions of whiteware shards excavated at the Kwangju royal kilns, Ch'unghyodong, and four other local-level kilns. In Korea, the rise of whiteware technology began in the early years of the Chos$\breve{o}$n dynasty, when the indigenous tradition of Kory$\breve{o}$ celadon was strongly influenced by the whiteware aesthetics of the Chinese Ming dynasty. The Kwangju royal kilns eventually made hard-textured whiteware of a quality equivalent to that of the Chinese by using type of porcelain stone that contained slightly less $Fe_2O_3$ and $TiO_2$ and slightly more $K_2O$ than that used for celadon. In contrast, the potters of Ch'unghyodong achieved the same level of quality by finding and using a totally different material: kaolinitic clay. The porcelain stone used at the Kwangju kiln was commonly found in Korea and south China, whereas kaolinitic clay (which has a high aluminum content) was typically found in north China, and was only rarely used in Korea. The flux component of the glaze compositions was mostly limestone, first in burnt form and later in crushed form, and the clay component was often glaze stone, which was a finer-grained porcelain stone with a higher proportion of feldspar. In the future, this comparative analytical study of Korean whiteware components should be extended to the $18^{th}$- and $19^{th}$-century kilns that are currently being excavated at a rapid pace.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.192-211
• /
• 2021

In Seongju, Gyengsangbuk-do, the Placenta Chamber (胎室, Taesil) of 18 sons and a son of the crown prince of King Sejong(世宗大王) is located in one place. Taesil refers to the place where the umbilical cord and placenta, which are separated when the baby is born, are placed in a jar made of pottery and stone box and then buried on the ground. The placenta chamber in Seongju has the Buncheong ware (粉靑沙器) cover buried on the ground to protect the baby's placenta. These covers are all hemispherical, with a diameter of more the 20cm. The decorations were made using black and white inlaid techniques only on the outside. The Buncheong ware cover with this shape and pattern has been confirmed only in the placenta chamber in Seongju. This study targets 6 of the Buncheong ware cover whose owners were identified, when and where they were prepared, what the stylistic features and meanings are, and where it was produced. The results of the study are as follows. First, ss a result of reviewing the production background and procurement system of this bowl, it was inferred that it was sourced from Jangheunggo (長興庫) at the central government office, between 1436 and 1439, when the event to bury the placenta of royal members in the ground was the most active. Second, it analyzed the unique features of this cover, such as the shape, pattern, and baked traces. The shape and pattern were compared to the ritual objects contained in the Sejong Silok Oryeui (『世宗實錄』 「五禮」, Five Rites of King Sejong Chronicle) and the lid of the royal placenta jar made in the 15th and 16th centuries. Third, this study suggests that the baking method was based on the shape and location of the traces remaining outside the cover. Finally, the following data were used to estimate the production site: the relationship with the 'Jagiso (磁器所, ceramic workshop) registered in the Sejong Silok Jiriji (『世宗實錄』 「地理志」, Geographical Appendix of King Sejong Chronicle); various records of contribution and dedication about the Buncheong ware made here; and the Buncheong ware and related tools excavated from the kiln site in the area. The place where the Buncheong ware cover was produced is estimated to be the most likely production site for the kiln site in Chunghyo-dong Kiln Site, located in Jeolla-do province by synthesizing the data above.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.555-558
• /
• 2005

국제통화기금(IMF ; International monetary Fund)관리시대를 겪으면서 우리나라는 모든분야에서 실적 및 성과지상주의를 도입하여 모든 것은 효율성과 유연성 위주로 제도를 바꾸었고, 동양의 전통사상인 충효와 신의는 실적과 평가라는 목적과 수단으로 대체되었다. 본 논문에서는 국민의 정부에서 시작되어 참여정부에 이르기까지 동 시기에 우리나라에서 주로 사용해 왔던 성과지상주의와 이에 편승하여 정부가 그동안 만들어 시행해 온 각종 평가 중에서 국가연구개발 평가에 대해 집중적으로 살펴보았다. 평가시스템들이 양산된 배경에는 외국계 상공인들의 요구와 우리나라 시장 확대를 통해 이익을 극대화 하려는 외교적 압력 외에도 평가시스템을 활용함으로써 얻게되는 특정정부부처 등 평가기관들의 권력상승작용에 대한 기대감등으로 경쟁적으로 평가시스템을 도입하였고, 평가시스템에 평가위원 등으로 참여하는 각 대학의 교수 등 평가자들 또한 평가자로서의 권한을 향유하는데 따른 평가집단으로서의 역할을 하면서 냉철한 검토와 준비없이 평가가 진행되고 있다. 따라서 피평가기관이 업무추진보다 평가준비에 더욱 많은 시간을 소비한다면 국가경제에 큰부담으로 작용할 것이므로 사업에 대한 각종평가는 년2회를 넘지 않도록 평가를 제한해야 한다.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.179-185
• /
• 1992

Rhizobium meliloti populated in five Korean pasture soils were characterized by symbiotic effectiveness and intrinsic antibiotic resistance using whole-soil inoculum and 11 antibiotics, respectively. Most probable number (MPN) of naturalized rhizobia counted with alfalfa Vernal[Medicago sativa (L.)] as a host ranged $1.7{\times}10^2\;cells/g$. soil(Chunghyo, Kyeongiu)-$1.0{\times}10^5\;cells/g$. soil(Gampo, Kyeongiu) and ended to be positively associated with soil pH. On the whole, the effectiveness of population as compared to TAL mix inoculum (TAL 380+TAL 1372+TAL 1373) was very low. Nevertheless, there were two highly effective strains, YCK 539 and YCK 542, which were not inferior to TAL 1372, from Ogpo, Dalseong among the total of 30 of 6 isolates per each soil. As long as mean $N_2$ fixing ability of each soil isolate, the isolates from Hyeongog, Kyeonju were outstanding and the rest were in order of Ogpo, Dalseong>Chunghyo, Kyeongju>Hwaweon, Dalseong>Gampo, Kyeongiu. Isolates as a whole were resistant to erythromycin(67崙), nalidixic acid(77%), and streptomycin sulfate(8051), which had the concentration of $100\;{\mu}g/ml$, $160\;{\mu}g/ml$, and $10\;{\mu}g/ml$, respectively and divided into 14 patterns of resistance. Association between resistances in each soil was not clear. And there was no relationship of resistance pattern to effectiveness. The best effective strain YCKa 542 exclusively fell into No. X pattern having resistance to erythromycin, nalidixic acid, and neomycin sulfate.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.54-70
• /
• 2023

Surveys and studies on cultural assets using LiDAR measurement are already active overseas. Recently, awareness of the advantages and availability of LiDAR measurement has increased in Korea, and cases of using it for surveys of cultural assets are gradually increasing. However, it is usually restricted to surveys of mountain fortresses and is not actively used for surveys of ancient tombs yet. Therefore, this study intends to emphasize the need to secure fundamental data from LiDAR measurement for the era from the Three Kingdoms to Unified Silla in which recovery, maintenance, etc., in addition to the actual surveys, are unfulfilled due to the sites being mainly distributed in mountainous areas. For this, LiDAR measurement was executed for the area of Jangsan Ancient Tombs and Chunghyo-dong Ancient Tombs in Seoak-dong, Gyeongju, to review the distribution and geographical conditions of ancient tombs. As a result, in the Jangsan Ancient Tombs, in which a precision archaeological (measurement) survey was already executed, detailed geographic information and distribution conditions could be additionally identified, which could not be known only with the layout indicated by the topographic map of the existing report. Also, in the Chunghyo-dong Ancient Tombs, in which an additional survey was not conducted after 10 tombs were found during the Japanese colonial period, the location of the ancient tombs initially excavated was accurately identified, and the status and additional information was acquired, such as on the conditions of ancient tombs not surveyed. Such information may also be used as fundamental data for the preservation and maintenance of future ancient tombs in addition to the survey and study of the ancient tombs themselves. LiDAR measurement is most effective for identifying the condition of ancient tombs in mountainous areas where observation is difficult or access is limited due to the forest zone. It may be executed before on-site surveys, such as archaeological surveys, to secure data with high availability as prior surveys or pre-surveys. Therefore, it is necessary to secure fundamental data from LiDAR measurement in future surveys of ancient tombs and to establish a survey and maintenance/utilization plan based on this. To establish survey/study and preservation/maintenance measures for ancient tombs located in mountainous areas, a precision archaeological survey is currently executed to draw up a distribution chart of ancient tombs. If LiDAR measurement data is secured before this and used, a more effective and accurate distribution chart can be drawn up, and the actual conditions can be identified. Also, most omissions or errors in information can be prevented in on-site surveys of large regions. Therefore, it is necessary to accumulate fundamental data by actively using LiDAR measurement in future surveys of ancient tombs.