• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.413-420
• /
• 2005

Purpose: Neuroreceptor PET studies require 60-120 minutes to complete and head motion of the subject during the PET scan increases the uncertainty in measured activity. In this study, we investigated the effects of the data-driven head mutton correction on the evaluation of endogenous dopamine release (DAR) in the striatum during the motor task which might have caused significant head motion artifact. Materials and Methods: $[^{11}C]raclopride$ PET scans on 4 normal volunteers acquired with bolus plus constant infusion protocol were retrospectively analyzed. Following the 50 min resting period, the participants played a video game with a monetary reward for 40 min. Dynamic frames acquired during the equilibrium condition (pre-task: 30-50 min, task: 70-90 min, post-task: 110-120 min) were realigned to the first frame in pre-task condition. Intra-condition registrations between the frames were performed, and average image for each condition was created and registered to the pre-task image (inter-condition registration). Pre-task PET image was then co-registered to own MRI of each participant and transformation parameters were reapplied to the others. Volumes of interest (VOI) for dorsal putamen (PU) and caudate (CA), ventral striatum (VS), and cerebellum were defined on the MRI. Binding potential (BP) was measured and DAR was calculated as the percent change of BP during and after the task. SPM analyses on the BP parametric images were also performed to explore the regional difference in the effects of head motion on BP and DAR estimation. Results: Changes in position and orientation of the striatum during the PET scans were observed before the head motion correction. BP values at pre-task condition were not changed significantly after the intra-condition registration. However, the BP values during and after the task and DAR were significantly changed after the correction. SPM analysis also showed that the extent and significance of the BP differences were significantly changed by the head motion correction and such changes were prominent in periphery of the striatum. Conclusion: The results suggest that misalignment of MRI-based VOI and the striatum in PET images and incorrect DAR estimation due to the head motion during the PET activation study were significant, but could be remedied by the data-driven head motion correction.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.23-29
• /
• 1970

This experiment is to improve the wrinkle recovery (W.R.) of silk fabrics. The silk fabrics is creased very well, and the crease is the serious defection of it. This experiment is to improve the nature by use of formaldehyde on fabrics. The reagents used were HCl, CH$_3$COOH, CaC$_2$, HCHO, Na$_2$CO$_3$, NH$_4$OH, NaOH and NaHCO$_3$. The silk fabrics was treated, to compare 1 he influence of conditions, by varying the quantities of reagents and the temperature of solution, and the reaction time. The cotton fabrics and the viscose rayon were sunk with the silk at the same condition to be compared the influence. 1) Those of the most suitable temperature to improve for the better W.R. are 75$^{\circ}C$ for silk, 35-45$^{\circ}C$ for cotton, and no particular temperature under 75$^{\circ}C$ for viscose rayon. 2) The W.R. improvements after treated at the temperature of 1) were 11％ for silk and 33.4％ for cotton. 3) There are the best treating time for every fabrics. They were 60 to 90 min. for viscose rayon when HAC Ras used for solvent. It took, however, 60min. of the best time for silk, 120 min. for cotton, and 40 min. for viscose rayon when acetic anhydride instead of HAC was used. 4) It was possible to improve 16.6％ of W.R. for silk at the most suitable treating time, 25.0％ for cotton, and 13.3％ for viscose rayon. 5) Acetic anhydride was rather more effective to improve W.R. of both silk and viscose rayon than HAC. 6) Treating time was also shorter in case of using acetic anhydride than HAC. 7) The improvement of W.R. were 8.3％ for silk at the 10 to 14 ml. of HCHO the best volume, 21. 5％ for cotton at 18m!. of HCHO, and 70％ of for viscose rayon at 14 to 18ml. of HCHO. 8) The most effective quantity of HCI is 14 ml. for both silk and cotton. The W.R. improvement of silk was 22.2％, and that of cotton 19.5％. 9) The W.R. of 83.3％ the best for silk and 61. 6％ for cotton were gained when 4.2gr. of NaHCO$_3$ brings down the percent of W.R. for both silk and cotton. 10) The more NaOH and NH$_4$OH as neutralizing agents, the less effectivity of W.R. until the quantities of the reagents are reached to a special range which are 3. 3m!. for silk and 3.3-6.6 ml. for cotton, and then we can see the W.R. increasing as the quantities of reagents are increased. These facts were evident in case of silk and cotton. We can also see with this fact that the reminder of 〔OH$\^$-/〕 neutralizing 〔CH$\^$+/〕in solution makes it possible to treat formaldehyde on fabrics. 11) Low curing temperature was comparatively better for silk, and high temperature better for cotton. 12) The result of this experiment shows that the Improvement of W.R. for silk was possible to 94％ which means 22％ W.R. increase compared to the untreated silk. This effect also shows that the improvement to W '||'&'||' W (wash and wear) of silk will be possible.

• Journal of Nutrition and Health
• /
• v.9 no.1
• /
• pp.84-91
• /
• 1976

Chemical determination were made to analyze the concentration of nutrients including proximate composition, vitamins, minerals, amino acids and fatty acids in three kinds of locally produced infantile formula milk(DFM) and one fermented milk(FM). An attempt was also made to compare the analytical values of nutrients against guaranteed values. The results obtained are summarized as follows; 1. The analyzed value of protein and fat content in DFM-A.B.C was slightly lower than that of guaranteed values and a reverse trend was observed in the case of total carbohydrate. There were no differences in proximate composition among the three kinds of DFM. It was found that the FM contained less protein and fat than the fresh milk, but it seemed that a considerable amount of sugar was added to FM. 2. The analyzed values of vitamin $A(2{\sim}3\;times)$ and $E(4{\sim}6\;times)$ contents in DFMS were higher than those of the guaranteed values except niacin. There were a little differences in vitamin contents among DFMS analyzed. 3. In the case of minerals, the analyzed values were similar to the guaranteed values except the calcium concentration that analyzed value was much higher than guaranted value. When the DFMS were diluted to 15% by adding water to compare with the human and fresh cow milk, it was found that the diluted DFMS resembled the human milk rather than cow milk in the content of energy, carbohydrates, protein and ash. The higher contents of iron and most vitamins in the diluted DFMS than the human milk or cow milk would indicate that they were fortificated with these nutrients. When these diluted DFMS were compared with the Korean R.D.A. for infant, it was clear that they could supply sufficient amount of the nutrients required by R.D.A. except the niacin which failed to reach the recommended level. The fact that iron content of DFM-C was not sufficient while vitamin A supply was excessive by 6 fold would indicate that further studies for the improvement may be necessary. 4. There was a little difference among DFMS in amino acid composition. The similarity of the essential amino acids composition between DFMS and cow milk indicated that there was no modification of the essential amino acids. However, present data showed that the amino acid compositon of FM was similar to that of the cow milk. 5. There was no difference among DFMS in the degree of saturation of fatty acids. The similar or higher levels of essential fatty acids contents of DFMS as compared with human milk revealed that essential fatty acids were added to DFMS during the course of process. From the experimental results described above, it may be concluded that the nutritive effects of three kinds of locally produced DFMS were much alike. It was also found that macro and micro nutrient composition except amino acid composition of locally produced dried formula milk was very much similar to that of the human milk. Moreover, fortification of iron and vitamins resulted in improving their nutritive values as the single form of infantile food, but it seemed that more consideration should be given on the fortification of some nutrients.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.161-174
• /
• 1997

Omega-3 fatty acids have been major research interests in medical and nutritional science relating to life sciences since after the epidemiologic data on Green3and Eskimos reported by several researchers clearly showed fewer per capita deaths from heart diseases and a lower incidence of adult diseases. Linolenic acid(LNA) is an essential fatty acid for human beings as well as linoleic acid(LA) due to the fact that vertebrates lack an enzyme required to incorporate a double bond beyond carbon 9 in the chain. In addition the ratio of omega-6 and 3 fatty acids seems to be important in terms of alleviation of heart diseases since LA and LNA competes for the metabolic pathways of eicosanoids synthesis. High consumption of omega-3 fatty acids in seafoods may control heart diseases by reducing blood cholesterol, triglyceride, VLDL, LDL and increasing HDL and by inhibiting plaque development through the formation of antiaggregatory substances like PGI$_2$, PGI$_3$ and TXA$_3$ metabolized from LNA. Omega 3 fatty acids also play an important role in neuronal developments and visual functioning, in turn influence learning behaviors. Current dietary sources of omega-3 fatty acids are limited mostly to seafoods, leafy vegetables, marine and some seed oils and the most appropriate way to provide omega-3 fatty acids is as a part of the normal dietary regimen. The efforts to enhance the intake of omega-3 fatty acids due to several beneficial effects have been made nowadays by way of food processing technology. Two different ways can be applied: one is add Purified and concentrated omega-3 fatty acids into foods and the other is to produce foods with high amounts of omega-3 fatty acids by raising animals with specially formulated feed best for the transfer of omega-3 fatty acids. Recently, items of manufactured and marketed omega-3 fatty acids fortified foodstuffs are pork, milk, cheese, egg, formula milk and ham. In domestic food market, many of them are distributed already, but problem is that nutritional informations on the amounts of omega-3 fatty acids are not presented on the labeling, which might cause distrust of consumers on those products, result in lower sales volumes. It would be very much wise if we consume natural products, result in lower sales volumes. It would be very much wise if we consume natural products high in omega-3 fatty acids to Promote health related to many types of adult diseases rather than processed foods fortified with omega-3 fatty acids.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.1-8
• /
• 1990

The paper board sludge(PBS) itself and compost sludge manure(CSM) mixed with sawdust, fowl droppings and urea to the PBS were treated to soybean plants to find the effects of growing characters, yield components, and nutritional compounds in the plant tissues. 1. Percentages of missing plants were 5-9% and 3.6-4.1% in the treatments of PBS and CSM, respectively. After that, the plants were restored to normal conditions. Anyway it is not desirable to use the paper board sludge and immature compost sludge manure in seeding time or to young seedlings. 2. Growth of the plant height was retarded in early growing phase, but it was normal in later stages. And the width and length of the largest leaf, numbers of main stem nodes and pods were not significant among the treatments. 3. The yield intends to increase through the treatments of 1,200, 1,600, and 2,000Kg PBS per 10a. In the CSM treatments with high rate of sawdust, fowl droppings and urea, the numbers of pods and grains were higher than the treatment of high content of PBS. 100-grain and one liter weights were opposite intention. It was suggested that the excess nitrogen amounts from the compost sludge manure than conventional fertilization affected to the yield components. 4. The contents of the main chemical compounds such as N, $P_2O_5$, $K_2O$, Ca, Mg were determined. The concentrations of nitrogen were higher in the treatment of PBS and CSM than none and control. 5. In conclusion, the nutritional effects of PBS were in evidence. To use the sludges, it should be fermented with adequate additives to improve the aeration, C/N ratio, activity of microbial, and other conditions. The sludges could be used to crops as a fertilizers effectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• Strategy21
• /
• s.46
• /
• pp.239-276
• /
• 2020

The failure of early economic sanctions aimed at hurting the overall economies of targeted states called for a more sophisticated design of economic sanctions. This paved way for the advent of 'smart sanctions,' which target the supporters of the regime instead of the public mass. Despite controversies over the effectiveness of economic sanctions as a coercive tool to change the behavior of a targeted state, the transformation from 'comprehensive sanctions' to 'smart sanctions' is gaining the status of a legitimate method to impose punishment on states that do not conform to international norms, the nonproliferation of weapons of mass destruction in this particular context of the paper. The five permanent members of the United Nations Security Council proved that it can come to an accord on imposing economic sanctions over adopting resolutions on waging military war with targeted states. The North Korean nuclear issue has been the biggest security threat to countries in the region, even for China out of fear that further developments of nuclear weapons in North Korea might lead to a 'domino-effect,' leading to nuclear proliferation in the Northeast Asia region. Economic sanctions had been adopted by the UNSC as early as 2006 after the first North Korean nuclear test and has continually strengthened sanctions measures at each stage of North Korean weapons development. While dubious of the effectiveness of early sanctions on North Korea, recent sanctions that limit North Korea's exports of coal and imports of oil seem to have an impact on the regime, inducing Kim Jong-un to commit to peaceful talks since 2018. The purpose of this paper is to add a variable to the factors determining the success of economic sanctions on North Korea: preventing North Korea's evasion efforts by conducting illegal transshipments at sea. I first analyze the cause of recent success in the economic sanctions that led Kim Jong-un to engage in talks and add the maritime element to the argument. There are three conditions for the success of the sanctions regime, and they are: (1) smart sanctions, targeting commodities and support groups (elites) vital to regime survival., (2) China's faithful participation in the sanctions regime, and finally, (3) preventing North Korea's maritime evasion efforts.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.177-187
• /
• 2002

In our experiment, selected mutants were used which showed not only the phenotype of a specific unpolished rice but also phenotypes of EM 40, LO 1050, and TAL 214. Reciprocal crosses between the mutants were conducted to select strains which would have more quantity of lipids than before. The constitution of fatty acid was also tested to figure out nutritional aspects of the mutants. In the crossing between EM 40 mutants and mutants (LO 1050) having a thick aleurone layer, the expression of EM 40 mutants has no relation with the thickness of the aleurone layer. And the lipid content of new F$_2$ strains through the crossing is 4.15 ％. The lipid content is larger than those of the parents including Kinmaze and in other crossings of this experiment. This is attributed to the fact that the new F$_2$ strains are the products of the crossing between genes responsible for the size of buds, where lipid is accumulated, and genes accountable for the thickness of the aleurone layer. In the crossing between EM 40 mutants and TAL 214 mutants, lipid content of the new F$_2$ strains is 3.8 ％, higher than 2.92 ％ of TAL 214 mutants. But the degree of lipid increase is smaller than in two other crossings. This is probably because genes expressing the phenotypes of TAL 214 affect the size of EM 40, which gets smaller. The aleurone layer of the new F$_2$ strains is 12 $\mu\textrm{m}$ thicker than the layer of TAL 214 mutants, but 6 $\mu\textrm{m}$ thinner than that of parents (LO 1050) having a thick aleurone layer. This seems to be affected by the size of a microscope. The phenotype of the new F$_2$ strains appears to be similar to that of TAL 214. The lipid content of the new F$_2$ strains is 3.85 ％, larger than 2.92 ％ of TAL 214 and 3.01 % of LO 1050. The increase may be due to the aleurone layer of LO 1050. And the size of the bud of the unpolished rice, though it is not big enough like that of LO 1050, seems to be affected by the accumulation of genes in the thick aleurone layer. The accumulation may contribute to the increase in the content of lipid. When it comes to the constitution of fatty acid, there is little difference between parents like Kinmaze and the new F$_2$ strains. But oleic acid increases while linoleic acid decreases. And the decrease in the linolenic acid seems to contribute to the increase in lipid content. This fact also raises the possibility that genes accountable for specific phenotypes could change the quality of rice if the genes are accumulated. Now, experiments on strains which have large lipid content in EM 40 type 1(ge-1, 3.68 ％), EM type 2(ge-2, 2.91 ％), thick aleurone layer(4.63 ％), and starch layer(3.44 ％) are under way to figure out the effects of gene accumulation. These experiments are likely to present the ways for increasing the lipid content.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.101-108
• /
• 2012

This study was conducted to confirm the mass production of male pupae and sex-limited larval marking variety as a host for synnemata production of Isaria tenupes in RDA(Rural Development Administration). Silkworm pupation, infection rate and synnemate formation of I.tenuipes were examined. Among the silkworm varieties tested, male Hansaengjam showed the highest pupation rate at 98.7%. I. tenuipes infection rate of larvae of newly-exuviated 5th instar silkworm was 83.7 ~ 90.4% in the spring rearing season and 91.7 ~ 96.6% in the autumn rearing season. Synnemata production of I. tenuipes was execellent in female Yangwonjam with an incidence rate of 99.5% followed by male Yangwonjam(99.5%) and Baegokjam(99.4%) in the spring and autumn rearing season. Synnemata living weight ranged from 0.93 ~ 1.25 g in the spring rearing season. The female Hansaengjam had the heaviest synnemata weight(1.25 g). Synnemata dry weight ranged from 0.27 ~ 0.35 g in the spring rearing season. The female Yangwonjam had the heaviest synnemata weight(0.35 g).

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2019

Purpose: The purpose is to clarify the effect of additional scattering ratio on the edge of the block according to the increasing block thickness with low melting point lead alloy and pure lead in electron beam therapy. Methods and materials: $10{\times}10cm^2$ Shielding blocks made of low melting point lead alloy and pure lead were fabricated to shield mold frame half of applicator. Block thickness was 3, 5, 10, 15, 20 (mm) for each material. The common irradiation conditions were set at 6 MeV energy, 300 MU / Min dose rate, gantry angle of $0^{\circ}$, and dose of 100 MU. The relative scattering ratio with increasing block thickness was measured with a parallel plate type ion chamber(Exradin P11) and phantom(RW3) by varying the position of the shielding block(cone and on the phantom), the position of the measuring point(surface ans depth of $D_{max}$), and the block material(lead alloy and pure lead). Results : When (depth of measurement / block position / block material) was (surface / applicator / pure lead), the relative value(scattering ratio) was 15.33 nC(+0.33 %), 15.28 nC(0 %), 15.08 nC(-1.31 %), 15.05 nC(-1.51 %), 15.07 nC(-1.37 %) as the block thickness increased in order of 3, 5, 10, 15, 20 (mm) respectively. When it was (surface / applicator / alloy lead), the relative value(scattering ratio) was 15.19 nC(-0.59 %), 15.25 nC(-0.20 %), 15.15 nC(-0.85 %), 14.96 nC(-2.09 %), 15.15 nC(-0.85 %) respectively. When it was (surface / phantom / pure lead), the relative value(scattering ratio) was 15.62 nC(+2.23 %), 15.59 nC(+2.03 %), 15.53 nC(+1.67 %), 15.48 nC(+1.31 %), 15.34 nC(+0.39 %) respectively. When it was (surface / phantom / alloy lead), the relative value(scattering ratio) was 15.56 nC(+1.83 %), 15.55 nC(+1.77 %), 15.51 nC(+1.51 %), 15.42 nC(+0.92 %), 15.39 nC(+0.72 %) respectively. When it was (depth of $D_{max}$ / applicator / pure lead), the relative value(scattering ratio) was 16.70 nC(-10.87 %), 16.84 nC(-10.12 %), 16.72 nC(-10.78 %), 16.88 nC(-9.93 %), 16.90 nC(-9.82 %) respectively. When it was (depth of $D_{max}$ / applicator / alloy lead), the relative value(scattering ratio) was 16.83 nC(-10.19 %), 17.12 nC(-8.64 %), 16.89 nC(-9.87 %), 16.77 nC(-10.51 %), 16.52 nC(-11.85 %) respectively. When it was (depth of $D_{max}$ / phantom / pure lead), the relative value(scattering ratio) was 17.41 nC(-7.10 %), 17.45 nC(-6.88 %), 17.34 nC(-7.47 %), 17.42 nC(-7.04 %), 17.25 nC(-7.95 %) respectively. When it was (depth of $D_{max}$ / phantom / alloy lead), the relative value(scattering ratio) was 17.45 nC(-6.88 %), 17.44 nC(-6.94 %), 17.47 nC(-6.78 %), 17.43 nC(-6.99 %), 17.35 nC(-7.42 %) respectively. Conclusions: When performing electron therapy using a shielding block, the block position should be inserted applicator rather than the patient's body surface. The block thickness should be made to the minimum appropriate shielding thickness of each corresponding using energy. Also it is useful that the treatment should be performed considering the influence of scattering dose varying with distance from the edge of block.