• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.163-170
• /
• 2008

According to the rules, a crash cushion is supposed to set up products that is satisfied with the standard of a performance test after performing the car crash test by road safety facilities and management guide. For development of crash cushion, performance should be estimated through the car crash test eventually. However, there is no reasonable design method which considers passenger's safety and only depend on crash test without an alternative plan. Therefore it incurs a loss materially and takes a lot. Therefore, we are asked to create a systematic design of the crash cushion. This study shows that a scientific basis of applying single degree of freedom when it designs the crash cushion after analyzing vehicle crash test data of crash cushion and also represents design of crash cushion through single degree of freedom response spectrum using calculated by crash test data on crash cushion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.374-379
• /
• 2017

In vehicle to pedestrian accidents, cracks occur in the vehicle laminated glass due to impact of a pedestrian's head. In this study, FMH(Free Motion Headform) was used to experiment on and analyze the crack patterns on a vehicle laminated glass that collides with an adult headform at speeds of 20 km/h, 30 km/h, and 40 km/h, respectively. Applying the acquired experimental data and material property of the vehicle laminated glass to the structural analysis program LS-Dyna, we could develop the FE model of vehicle laminated glass similar to real vehicle laminated glass. We could estimate the head impact velocity and pedestrian's vehicle impact velocity using the Madymo program.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.163-166
• /
• 2001

본 논문에서는 ITS(Intelligent Transportation System) 기술중의 하나인 차량 충돌 방지 시스템의 신호처리부를 설계 구현하였다. 제안된 시스템은 FMCW (Frequency Modulated Continuous Wave)방식의 770Hz 밀리미터파 레이더를 기준으로 파라미터 값을 설계하여 거리와 속도를 실시간 검출하도록 구현되었다. 제안된 시스템은 TI사의 TMS320C31-40 DSP 와 AT89C52 Bbit 마이크로프로세서로 구현되어 10Hz 이상의 갱신율, 0.2m의 거리 분해능 및 2knvh의 속도 분해능을 제공하고 있다. 실험 환경으로 주파수 발생기(Function Generator)에서 비트주파수(Beat Frequency)를 생성하여 동작을 확인하였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.123-127
• /
• 2002

DRAM용 capacitor의 차세대 전극물질 후보 중의 하나인 Ru 박막을 고밀도의 ECR 플라즈마를 이용하여 식각 특성 및 식각 메커니즘을 알아보고자 하였다. 식각시 Ru은 oxygen들과 결합을 하여 RuO2 화합물들을 생성하고 RuO2 화합물들은 다시 oxygen들과 결합을 함으로써 휘발성이 강한 RuOx 화합물들을 생성하였다. 하지만 이러한 식각이 이루어지기 위해서는 oxygen이온들에 의한 충돌이 필요하며, Cl과 F 가스들을 첨가가 의해 충돌 이온의 에너지가 증가되어 RuO2와 O radical들의 반응성을 향상시켰다. 이에 휘발성이 좋은 RuO4들의 형성속도를 증가시킴으로써 식각 속도를 향상시킬 수 있었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2009

Auto-navigation algorithm have been studied to avoid collision and grounding of a ship due to human error. There have been many research on collision avoidance algorithms but they have been validated little on the real coastal traffic situation. In this study, a Collision Avoidance algorithm is developed by using Fuzzy algorithm and the concept of Changeable Action Space Searching (CAS). In the first step, on a basis of collision risk calculated from fuzzy algorithm in the current time(t=to), alternative Action Space for collision avoidance is planned. In the second step, next alternative Action Space for collision avoidance in the future($t=to+{\Delta}t$) is corrected and re-planned with re-evaluated collision risk. In the third step, the safest and most effective course among Action Space is selected by using optimization method in real time. In this paper, the main features of the developed collision avoidance algorithm (CAS) are introduced. CAS is implemented in the ship-handling simulator of MOERI. The performance of CAS is tested on the situation of open sea with 3 traffic ships, whose position is assumed to be informed from AIS. Own-ship is fully autonomously navigated by autopilot including the collision avoidance algorithm, CAS. Experimental results show that own-ship can successfully avoid the collision against traffic ships and the calculated courses from CAS are reasonable.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.56-64
• /
• 2016

Damage of sea-crossing bridge by ship collision is related to estimate frequencies of overloading due to impact, and bridge accordingly must be designed to satisfy related acceptance criteria. Another important aspect is the management on increment of collision risk during the service period. In this study, related plan, main span length, air draft clearance and collision risk are analyzed for the interim assessment of Incheon Bridge focusing on the ship collision problem. In particular, for the increment of collision risk, the optimized navigation speed is proposed by reviewing the research findings and navigation guidelines etc. as a temporary expedient. Also basic procedure for reasonable prediction of target vessel and passage is established and probabilistic prediction method to embrace the uncertainty of the prediction is proposed as a fundamental solution. It is necessary to conduct further research on collision risk management and promptly carry out interim assessments of other marine bridges.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8966-8976
• /
• 2015

Unshielded posts on roadside are a critical hazard to the safety of impact vehicle to the posts. A crashworthy post is developed. In the first phase, it dissipates the impact energy by the linear momentum conservation principle while the plastic impact between the post and vehicle takes place, then, the second phase dissipation follows by the deformation of the energy absorbing modules embedded in the guide trough of the foundation. Simulations of impacts to a rigidly connected post and crashworthy post were made using LS-DYNA program, which demonstrated the danger of unshielded rigidly connected post and the effectiveness of the proposed crashworthy post to the 0.9ton-80km/h impact.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.555-563
• /
• 2012

In earth orbit, a great number of orbital debris move around in extremely high velocity, and they become serious threats to satellites. In this study, smoothed particle hydrodynamics(SPH) is used to analyze the damage of a low earth orbit satellite due to the hypervelocity impact with orbital debris. The damage of honeycomb sandwich panel(HC/SP) used for walls of a satellite is analyzed with respect to impact velocities. For the additional analysis to examine the safety of interior components of the satellite, an attached electronic box and an offset electronic box are considered. As a result of the analysis considering the orbital debris having a probability of collision more than 2% at altitude of 685km, it is shown that the HC/SP can be perforated but only small craters are formed on both the attached electronic box and the offset electronic box.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.69-79
• /
• 2014

This paper proposes the Collision Prevention System based on Fuzzy which reasons a risk with the location information of vehicles and pedestrians and prevents collision between vehicles, and between a vehicle and a pedestrian with the reasoned risk. The proposed system provides three functions. First, it identifies a pedestrian's location with his smart phone and a vehicle's location with the GPS equipped in the vehicle. and transfers the identified information to their neighbors. Second, it makes a vehicle and a pedestrian reason a risk by considering a moving direction, a moving speed and road information. Third, it provides a vehicle and a pedestrian with the reasoned information such as route detour, speed reduction, etc. Therefore, the proposed collision prevention system based on Fuzzy not only prevents collision accidents beforehand by reasoning a risk, but also reduces a variety of losses by protecting traffic accident and congestion.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.822-825
• /
• 2007

RFID(Radio Frequency Identification) 시스템에서 다수의 리더가 동시에 동일한 태그의 인식을 시도하는 경우, 태그는 다수의 리더가 요청한 내용을 처리할 수 없기 때문에 리더 충돌이 발생하게 된다. 이러한 리더 간 간섭에 의한 충돌은 RFID 시스템의 태그 인식 효율 및 인식 속도의 저하 등에 대한 주요 요인으로 작용하기 때문에 이를 방지할 수 있는 효과적인 리더 충돌 방지 알고리즘이 요구된다. 이에 본 논문에서는 리더 충돌이 발생한 경우, 관리 리더(Master Reader)와 보조 리더 그룹(Assistant Reader Group)간의 계층적인 구조를 형성하고, 관리 리더를 통해 하위 리더 그룹을 관리하여 리더 충돌을 방지하는 리더 충돌 방지 알고리즘을 제안한다. 또한, 모의실험을 통해 제안하는 알고리즘의 성능을 분석하고 평가하였다.