• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.311-313
• /
• 2018

해양안전심판원의 해양사고 통계자료에 따르면 기관손상 등을 제외한 해양사고 중 충돌사고의 비중은 가장 높고, 대부분의 충돌사고는 경계소흘 등 운항과실이 약 90%를 차지한다. 본 연구에서는 운항자의 항행 안전을 지원하고자 육상 무선 통신기술을 이용하여 중소형 선박의 충돌예방 시스템을 최종적으로 개발하기 위해 먼저 소형어선(30톤미만) 운항자의 요구분석을 수행하였다. 분석을 통해 충돌회피거리, 당직자 배치, 긴급피항시 필요시간, 충돌 및 경보시스템 개발에 필요한 사항 등을 도출하였다. 향후 이를 바탕으로 해상에서의 선박충돌 예방을 위한 신뢰성 높은 충돌경보 알고리즘을 개발 적용하는 등 사용자 편의적인 충돌경보 시스템을 개발하고자 한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.6
• /
• pp.634-639
• /
• 2014

This paper specifies a collision alarm using an infrared distance sensor that can identify the dangerousness of collision of active mobile robotic systems to various objects, such as unknown objects or another robots. And we analyse the major operating signals and features of the collision alarm for effective industrial applications. For the purpose, we consider a typical parking situation of a mobile robotic system with the collision alarm designed. As a result, it is shown that the proposed collision alarm is applicable for effective collision avoidance and safe driving of various mobile robots or vehicles.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.897-900
• /
• 2000

본 논문에서는 종방향 충돌경보 및 회피시스템(FCWA ; forward collision warning and avoidance)의 일환으로 가변적인 경사도를 가지는 고속도로상의 차선, 차량, 그리고 도로의 곡률을 효과적으로 검출할 수 있는 알고리듬을 제안하였다. 먼저 2D 영상좌표계에 나타나는 투영효과를 제거하기 위한 역투영(IPM; inverse perspective mapping)기법을 소개하였다. 또한 IPM과 필터로부터 차선과 차량을 효과적으로 검출할 수 있는 알고리듬을 소개하였다. 마지막으로 경사가 있는 실제도로영상에 대한 IMP의 수정된 파라미터 보정에 대한 개념 및 실제도로의 곡률 검출을 위한 기하학적 함수 추정기법을 설명하였다 실험결과 제안한 알고리듬이 실제도로영상에서 차선, 차량, 그리고 곡률의 검출에 효과적임을 확인할 수 있었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.156-165
• /
• 2000

This paper describes modeling and simulation of automotive forward collision warning and avoidance system using CASE(Computer-Aided Systems Engineering) tool. The system is composed or many sensors, a controller, warning devices, brakes and etc. The system was modeled by one activity chart, fourteen state charts and one module chart. Rear-end collision scenarios was generated by Simulink and used to support Stalemate model. The resulting model was used to evaluate the correctness of function and behavior of the system. A simulator for the system has been designed and used to validate the model under realistic operating conditions in the laboratory. To model and simulate the system's functionality and behavior brings clarity to system design early in the system development.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.12-20
• /
• 2001

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.3
• /
• pp.27-33
• /
• 2010

The goal for the CD&R system is to predict that a conflict is going to occur in the future, communicate the detected conflict to a human operator, and, in some cases, assist in the resolution of the conflict situation. To provide insight into different methods of conflict detection and resolution, a literature review of previous research models and current developmental and operational systems was performed. This paper focuses only on the specific attributes of each model, not on the depth to which a model has been analyzed, validated, or accepted. Thus, care should be taken to remember that a model that seems to be simple according to our categorization scheme may be significantly more viable than an apparently sophisticated model.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.849-854
• /
• 2007

This paper describes design and tuning of a full-range Adaptive Cruise Control (ACC) with collision avoidance. The control scheme is designed to control the vehicle so that it would feel natural to the human driver and passengers during normal safe driving situations and to avoid rear-end collision in vehicle following situations. In this study, driving situations are determined using a non-dimensional warning index and time-to-collision (TTC). A confusion matrix method based on natural driving data sets was used to tune control parameters in the proposed ACC System. An ECU-Brake Hardware-in-the-loop Simulation (HiLS) was developed and used for an evaluation of ACC System. The ECU-Brake HiLS results for alternative driving situation are compared to manual driving data measured on actual traffic way. The ACC/CA control logic implemented in an ECU was tested using the ECU-Brake HiLS in a real vehicle environment.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.379-388
• /
• 2015

In the end of 1990's, future free flight technology had been developed and tested in America and government established the plan for free flight until 2017. Aircraft separation assurance must be secured essentially to avoid collision between aircrafts before Free Flight comes true. Now, Civil aircraft has rules about avoidance activity with traffic collision avoidance system (TCAS) but it can't apply to light aircraft. So there is a need about alternative method to apply light-aircraft because it has space and price problem to use TCAS. In this paper, TCAS algorithm has been modified and verified by simulating with LABVIEW program under ADS-B condition to get miniaturization and weight lighting cheaply. By simulating, collision alert algorithm is analyzed and verified with collision situation proposed by ICAO, and 100% checked for performing the alert announciation on all cases by TCAS standards.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.288-298
• /
• 2015

For the commercialization of unmanned aircraft, we must validate the safety of the air/ground collision alert systems (CAS). The validation procedure of CAS requires the flight test which is not only expensive but also dangerous. To alleviate this problem, we need the simulation based validation process for the CAS. We developed an integrated UAV simulation (IUS) environment which interconnect the flight simulator, the Matlab/Simulink, and a target avionics simulation model. We developed the collision warning module of the TCAS and tested using IUS and flight encounter models. Using IUS, we can evaluate the performance and reliability of a target avionic system at the preliminary design stage of a development life cycle.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2014

In this paper, a developed device for detecting target's location and avoiding collision is proposed. Velocity and acceleration model of target are derived to estimate target's information, i.e. position, velocity and acceleration considering process and measurement noise. Kalman filtering method applied to the estimation process and its results was confirmed by simulation. The distance measurements system using laser sensor for moving target system is also developed to confirm the effectiveness of the proposed scheme. Experiments to get information of moving target with velocity and acceleration model was executed. The data with filtering and without filtering was compared by experiments. Discontinuous measured data was changed to smooth and continuous data by Kalman filtering. It is confirmed that desired data was obtained by applying proposed scheme. UI for measuring and monitoring the target data is developed and visual and auditory alarm function is attached on the system Finally, position estimation system of moving target with good performance is achieved by low price equipments.