• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.98-106
• /
• 2003

Nondestructive test (NDT) provides much information on concrete without damage of structural functions. Of NDT methods, elastic wave propagation methods, such as ultrasonic pulse velocity (UPV) method and impact-echo (IE) method, have been successfully used to estimate the strength, elastic modulus, and Poisson's ratio of concrete as well as to detect the internal microstructural change and defects. In this study, the concretes with water-binder ratio ranging from 0.27 to 0.50 and fly ash content of 20% were made and then their longitudinal wave velocities were measured by UPV and IE method, respectively. Test results showed that the UPV is greater than the longitudinal wave velocity measured by the If method, i.e., rod-wave velocity obtained from the same concrete cylinder. It was found that the difference between the two types of velocities decreased with increasing the ages of concrete and strength level. Moreover, for the empirical formula, the dynamic Poisson's ratio, static and dynamic moduli of elasticity, and velocity-strength relationship were determined. It was observed that the Poisson's ratio and the modulus of elasticity determined by the dynamic method are greater than those determined by the static test. Consequently, for the more accurate estimation of concrete properties using the elastic wave velocities, the characteristics of these velocities should be understood.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.235-245
• /
• 2011

This paper finds that business in the shipbuilding industry affects significantly the exchange rate and its variability. The effects of the amount of orders received and construction in the shipbuilding industry on the exchange rate and its variability are preemptive and long lasted. This implies that business cycles and the exchange rate hedge in the shipbuilding industry are important factors in understanding the exchange rate and its variability. Advancement in the technology of exchange rate hedge in future may reinforce the importance of business cycles in the shipbuilding industry. It is, therefore, required that the policy authority should monitor carefully the shipbuilding industry for the stability of foreign exchange market.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.15-27
• /
• 2022

In the past five years, the fatality rate of single-vehicle accidents has been 4.7 times higher than that of all accidents, so it is necessary to establish a system that can detect and respond to single-vehicle accidents immediately. The IoT(Internet of Thing)-based real-time traffic accident recognition system proposed in this study is as following. By attaching an IoT sensor which detects the impact and vehicle ingress to the guardrail, when an impact occurs to the guardrail, the image of the accident site is analyzed through artificial intelligence technology and transmitted to a rescue organization to perform quick rescue operations to damage minimization. An IoT sensor module that recognizes vehicles entering the monitoring area and detects the impact of a guardrail and an AI-based object detection module based on vehicle image data learning were implemented. In addition, a monitoring and operation module that imanages sensor information and image data in integrate was also implemented. For the validation of the system, it was confirmed that the target values were all met by measuring the shock detection transmission speed, the object detection accuracy of vehicles and people, and the sensor failure detection accuracy. In the future, we plan to apply it to actual roads to verify the validity using real data and to commercialize it. This system will contribute to improving road safety.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.141.2-141.2
• /
• 2015

교류임피던스 측정기법을 이용하여 전기화학적으로 외부환경에서 소재 금속까지 물질 및 전하이동에 관한 임피던스 측정이 가능하며 도막의 부식 및 노화정도 및 내식성의 평가가 가능하여 산업체에서 널리 이용되고 있다. RPCS(Remote Plasma Cleaning Source)는 패널 및 반도체 제조공정에서 CVD 증착공정 후 챔버 내부에 입혀지는 Si(실리콘)을 화학적으로 세정하기 위한 F(불소) Radical을 공급하는 원격 고밀도 플라즈마를 발생시키는 제품이다. RPCS의 바디는 알루미늄을 사용하고 절연 및 플라즈마에 대한 내구성을 확보하기 위해 아노다이징 코팅을 한다. 반응기 내벽의 표면이 공정 플라즈마에 노출될 때 소재는 화학적으로 매우 활성이 높은 라디칼과의 반응뿐만 아니라 이온의 충격을 동시에 받게 되며 이 과정에서 다량의 불소 (Fluorine) 라디칼과 전계에 반응한 이온의 운동에 노출되면서 아노다이징 코팅이 손상되는데 이는 기기의 수명 단축 및 파티클을 발생시키며, Arc의 원인이 되기도 한다. 실제 사용 환경에서는 기기의 분해 없이 아노다이징의 상태를 주기적으로 모니터링 하기가 대단히 어려워, 정기적으로 교체하고 있는 실정이다. 본 연구에서는 RPCS내 발생된 플라즈마 현상을 컨덕터로 활용하여 고주파 리액턴스를 임피던스로 환산하여 아노다이징 코팅의 손상 정도를 진단 및 모니터링하였다. 아노다이징이 손상된 내부 블럭과 정상상태인 내부 블럭의 임피던스를 비교하였고, 아노다이징 두께별 임피던스를 측정하였다. 그 결과 아노다이징 절연막이 손상된 블록의 임피던스가 정상 블록에 비해 낮았으며 두께별 임피던스도 비례함을 알 수 있었다. 향후에는 장기간 현장에서 축척되어진 시험데이터를 바탕으로 아노다이징 코팅의 수명예측진단 시스템을 구축하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.928-935
• /
• 2015

This paper presents low temperature structural tests of a UAV wing which has room temperature-curing adhesive bond. The wing structure is made of carbon fiber reinforced composites, and the skins are bonded to the inner structures (such as ribs and spars) using room temperature-curing adhesive bond. Also, to verify damage tolerance design of the wing structure, barely visible impact damages are intentionally created in the critical areas. The attachment fittings of the wing are fixed in a specially designed chamber which can simulate the low temperature environments of the operating altitudes. The test load is applied by hydraulic actuators which are placed outside the chamber. The structural tests consist of strain survey tests and a durability test for 1-life fatigue load spectrum. During the tests, strains of major parts are measured by strain gauges and FBG sensors. The change of the initial impact damages is also monitored using piezoelectric sensors. The 1-life damage tolerance of the composite structure is verified by the structural tests under the simulated environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.807-818
• /
• 2020

In this study, hydrophones using acoustic sensors were used to estimate the amount of bedload discharge in a forested watershed. The reaction characteristics were analyzed through hydrophone flume tests and field tests, and the quantitative bedload discharge was calculated and compared with that measured by a pit sampler. The hydrophone reaction changed the pulse according to the flow rate change, but did not react to standard sand. The pulse was different depending on the particle size and weight, and accordingly, there was a specific channel showing a suitable response. For a hydrophone installed in the field, by using an automatic impact device, the reaction characteristics of each channel were analyzed to confirm normal operation of the sensor and the suitability of the output value of each channel. In addition, a suitable channel was selected for the estimation of bedload discharge. The bedload discharge formula was developed using a hydrophone pulse and the average flow rate, and was compared with the measured data in the pit sampler in the study site. As a result of the study, if a hydrophone is used for monitoring the bedload in forested watersheds, it is considered effective in quantitatively estimating the weight of bedload discharge.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.785-796
• /
• 2023

In this study, a methodology for real-time classification and prediction of defects that may appear in PVDF(Polyvinylidene fluoride) sensors, which are widely used for structural integrity monitoring, is proposed. The types of sensor defects appearing according to the sensor attachment environment were classified, and an impact test using an impact hammer was performed to obtain an output signal according to the defect type. In order to cleary identify the difference between the output signal according to the defect types, the time domain statistical features were extracted and a data set was constructed. Among the machine learning based classification algorithms, the learning of the acquired data set and the result were analyzed to select the most suitable algorithm for detecting sensor defect types, and among them, it was confirmed that the highest optimization was performed to show SVM(Support Vector Machine). As a result, sensor defect types were classified with an accuracy of 92.5%, which was up to 13.95% higher than other classification algorithms. It is believed that the sensor defect prediction technique proposed in this study can be used as a base technology to secure the reliability of not only PVDF sensors but also various sensors for real time structural health monitoring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.575-584
• /
• 2021

The critical low temperature and response of the behavioral tolerance of red sea bream Pagrus major fingerlings were determined using the continuous behavior monitoring system (CBMS). The behavior of the experimental organisms was observed by decreasing the water temperature by 2.0℃ and 4.0℃ every 12 hours and 24 hours in the range of 8.0-20.0℃. An unstable behavior pattern was observed in red seabream fingerlings exposed to water temperatures below 12.0℃, in which the swimming activity decreased and repeatedly stopped, regardless of the exposure time and water temperature fluctuation. The swimming ability of the organisms exposed to 8.0-10.0℃ decreased sharply, and the behavior of staying at the bottom of the test tank was observed. Only 50 % of the organisms survived due to the low-temperature stress, and all individuals died within six hours after the cold shock. In addition, the behavior index (BI) decreased rapidly, and the amplitude change of the coefficient of variation (CV) was found to have a greater variation than the other water temperatures (p<0.05). Low-temperature stress of red sea bream is promoted at 12.0℃, and it is interpreted as the tolerance limit, which can induce a sublethal response of the organisms exposed to cold shock of 8.0-10.0℃.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.2
• /
• pp.65-72
• /
• 2015

According to recent statistics published by the National Industrial Security Center, former and current employees are responsible for 80.4% of companies' technology leakages, and employees of cooperative firms are responsible for another 9.6%. This means that 90% of technology leakages are intentionally or mistakenly caused by insiders. In a recent incident, a credit card company leaked private information, and the person responsible was an employee of a cooperative firm. These types of incidents have an adverse effect not only on a company's assets but also on its reputation. Therefore, most institutions implement various security solutions to prevent information from being leaked. However, security solutions are difficult to analyze and distinguish from one another because their logs are independently operated and managed. A large number of logs are created from various security solutions. This thesis investigates how to prevent internal data leakage by setting up individual scenarios for each security solution, analyzing each scenario's logs, and applying a monitoring system to each scenario.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.