• The Korean Journal of Pharmacology
• /
• v.28 no.2
• /
• pp.115-128
• /
• 1992

The training of male wistar rats for active conditioned response (ACR) was performed by one daily training session of 30 consecutive trials for 10 successive days using a two-way shuttle box, and the rats that showed 10 or more ACRs on the last day were treated for further 10 days with electroconvulsive shock (ECS : 50 mA, 0.5 msec; 100 Hz; 1.5 sec) and the following compounds. On the 20th day, all the rats were tested for the ACR rention. The ECS regimens were one ECS per day for 10 days with one day interval $(5{\times}ECS)$, one ECS at 3 hrs (ECS-3h), and one ECS at 24 hrs (ECS-24h), respectively, before the ACR retention test. And CDP-choline (cc: 250 mg/kg), spermine (SM: 10 mg/kg), ${\alpha}-difluoromethylornithine$ (DO: 250 mg/kg), or aminoguanidine (AG: 100 mg/kg) was administered by one daily i.p. injection for 10 days. The ACR number $(13.7{\pm}1.0)$ obtained on the last training day was increased by 37.23% on the 20th day in the control rats. And the ACR increase was significantly suppressed by 5-ECS, ECS-3h, CC, or SM but was little affected by ECS-24h, DO, or AG. However, the 5-ECS induced impairment of ACR retention was significantly suppressed by AG, SM, and CC in the order of potency but was little affected by DFMO. And the ECS-3h induced impairment was moderately worsened by SM or AG. The acetylcholine (ACh) of the rat hypothalamus (HT), hippocampus (HC), and entorhinal cortex (EC) was markedly increased by CC and moderately increased by SM, but little affected by ECS-3h, ECS-24h, DO, or AG. But $5{\times}ECS$ slightly increased the ACh content. The brain putrescine (Pt) content was significantly increased by AG and little affected by CC, SM, or DO. But the $5{\times}ECS$ markedy decreased the brain Pt content, and the decrease was significantly suppressed by CC, SM, or AG. CC induced the marked increases of the spermidine (Sd) and spermine (Sm) contents of all the areas. SM increased the Sd contents of all the areas and the EC-Sm content. DO decreased the brain Sd and Sm contents. And AG increased the HT-Sd content and the Sm contents of all the brain areas. The $5{\times}ECS$ induced decrease of the HC-Sm content was suppressed by CC, SM and AG. These results suggest that the improving effect of aminoguanidine on the $5{\times}ECS$ induced impairment of ACR retention may be ascribed in part to its activity as a diamine oxidase inhibitor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.47-53
• /
• 2020

The purpose of this study was to increase product reliability by improving the durability of the breech block for a 30mm Automatic Gun. The breech block is a key component of a gun that functions as chambering, closing, and extracting. The breech block requires high reliability, which needs to be improved because cracks of a breech block can occur early in operation. Cause analysis confirmed that the crack is caused by repeated impacts. Therefore, the following improvement measures were studied, and the effects were demonstrated using a firing test. The energy of impact absorption was increased by changing the material, and the stress concentration was mitigated by increasing the value of R. In addition, the fatigue life was increased by adding Shot-peening, deleting chromium plating, and changing the forging method. The firing test did not show firing trouble for up to 5,000 rounds. The start timing of the crack was delayed, and the depth was small. Therefore, the improved product was more durable than the existing product. This study can be used as a useful reference when assessing the improvement of the durability of similar products, life study, and criteria for crack acceptance.

• Korean Journal of Microbiology
• /
• v.52 no.3
• /
• pp.249-253
• /
• 2016

The inky cap, Coprinellus congregatus, produces several laccase isozymes during its life cycle: both hyphal tip laccase and sclerotial laccase are involved in the fungal development. When this fungus was transferred to an acid liquid medium (pH 4.0-4.5), a new laccase was synthesized and secreted into the culture supernatant. In order to examine its regulation by external pH, green fluorescent protein gene was ligated at the downstream of the promoters having different lengths. These expression vectors having different promoter lengths were inserted into the fungal transformation vector, pBARGEM7-1. These expression vectors were introduced to the mating type a1 and a2 monokaryons, and the transformants were selected by the phosphinothricin resistance. Transformant a1 (a1TF) and transformant a2 (a2TF) were mated with each other to generate homozygotic dikaryon transformants. All these transformants were grown in neutral liquid medium for 5 days, and then the whole cell homogenates were transferred to the acidic liquid medium (pH 4.1). After 36 h incubation at $25^{\circ}C$, cells were harvested for the analysis of GFP expression. GFP expression was detected in the transformant having full-length promoter (2.0 kb), but other transformants having shorter length promoter (shorter than 1.29 kb) failed to show the fluorescence. Therefore, the acid-responsive element in the laccase promoter should be localized between -2.0 kb ~ -1.29 kb region.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.14-23
• /
• 1998

The present study investigates numerically particle laden flow through compressor cascade. In general, a lot of turbine engines are affected by various particles which are suspending in the atmosphere. Especially in the case of aircraft aviating in volcanic, industrial and desert region including many particles, each components of engine system are damaged severely. That damage modes are erosion of compressor binding and rotor path components, partial or total blockage of cooling passage and engine control system degradation.. Initial damages can not be serious but cumulation of damages influences on safety of aircraft control and economical maintenance cost of engine system can be increased. When dust, materials and volcanic particles in the atmosphere flow in the compressor, it is necessary to predict damaged and deposited region of compressor blades. To the various flow inlet angle, predictions of particles trajectory in compressor cascade by Lagrangian method are presented and impulses by impaction of particles at blade surface are calculated. By the definition of particle deposition efficiency, characteristics of particles impact are considered quantitatively. With these prediction and experimental data, erosion rates are predicted for two materials - ceramic, soft metal - on compressor blade surface. Improvements like coating of blade surface could be found, by above prediction.

• Composites Research
• /
• v.27 no.6
• /
• pp.219-224
• /
• 2014

Nancomposites manufacture has been developed rapidly, because of reinforcing effects of CNT in terms of mechanical, electrical and thermal properties. In this study, 10 wt% CNT paste was fabricated with good dispersion state and easy processability. Damage sensing and reinforcing effect of CNT paste were investigated in nanocomposites. 10 wt% CNT paste exhibited better tensile and flexural properties than those of general 1 wt% CNT nanocomposites. To observe the healing effect of CNT paste, a crack was made artificially with 30wt% CF30wt%/PP composites, and the CNT paste was filled inside the crack. The damage sensing of CNT paste in CF30wt%/PP composites was investigated by electrical resistance measurement and mechanical tests. CNT paste exhibited good reinforcing effect in mechanical properties of CF30wt%/PP composites, and this reinforcing effect was getting better with larger cracks. The reason was because CNT paste had good interfacial adhesion with CF30wt%/PP composites to resist crack propagation. In electrical resistance measurement, there was a jump in electrical resistance signal at the adhesion interface. The jumping signal could be used to predict fracture of CF/PP composites. CNT nanocomposites for damage sensing had crack reducing effect and damage detection using electrical resistance method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.928-935
• /
• 2015

This paper presents low temperature structural tests of a UAV wing which has room temperature-curing adhesive bond. The wing structure is made of carbon fiber reinforced composites, and the skins are bonded to the inner structures (such as ribs and spars) using room temperature-curing adhesive bond. Also, to verify damage tolerance design of the wing structure, barely visible impact damages are intentionally created in the critical areas. The attachment fittings of the wing are fixed in a specially designed chamber which can simulate the low temperature environments of the operating altitudes. The test load is applied by hydraulic actuators which are placed outside the chamber. The structural tests consist of strain survey tests and a durability test for 1-life fatigue load spectrum. During the tests, strains of major parts are measured by strain gauges and FBG sensors. The change of the initial impact damages is also monitored using piezoelectric sensors. The 1-life damage tolerance of the composite structure is verified by the structural tests under the simulated environments.

• Korean Journal of Microbiology
• /
• v.26 no.4
• /
• pp.283-290
• /
• 1988

A spontaneous revertant of mutation rbsB103 that is ribose taxis-positive was characterized. This revertant was found to be export-competent in the export of ribose-binding protein shown by the disappearance of accumulated mutant precursor protein and the export of mature ribose-binding protein to the periplasm. The reversional change was shown to be in the region of risB gene that codes for the amino terminal portion of ribose-binding protein. Analysis by high-performance liquid chromatography of peptide patterns of ribose-binding proteins confirmed the relationship between the wild-type and the revertant proteins as shown for the mutant previously (Iida et al., 1985). When the processing rate of presursor proteins from the wild type and the revertant strain in vivo was compared by pulse-chase experiment, it was found that processing is less efficient than normal in the revertant. Purified mature proteins from both wild-type and revertant were subjected to amino acid sequencing. The results confirmed the amino acid changes deduced from the DNA sequencing and showed that processing of the revertant precursor occured in the correct position even though there are two different amino acids present in the signal sequence.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2000

RC oscillation method was applied to study the condenser characteristics of two metal sticks insulated by vinyl tube and used in the dielectric constant determinations of most soils. Its capacitance as influenced by the contacted ambient materials was measured as relative capacitance of the sensor sticks compared with the standard one on the RC oscillation circuit. According to the equivalent circuit of the sensor stick set, the measured capacitance was composed of a basic capacitance connected in parallel with sensor stick capacitance, which was composed of lineally connected vinyl tube capacitances and the sensing part capacitance. The dielectric constant (U) of the contacted ambient moist soil located in the sensing part around the sticks interrelated with the other parameters as following equation. $$\frac{1}{C-B}=\frac{k}{U}+Z$$ where C is the output total relative capacitance, B is the hidden and fixed basic relative capacitance, k is a constant related with U, and Z is a constant for the insulating vinyl tube capacitances determined by its thickness and dielectric constant. The constant k is determined by the spacing and length of sensor sticks. The Z value is theoretically an invariable constant, but it may become considerably bigger than the determined in lab if air tube is formed on the surface of sensor sticks by some shocks on them after their installation in soil. Due to the unstability of lab Z value, it may be better to revise it after sensor stick's installation in soil and no shaking shocks should be applied on them.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.7-22
• /
• 1992

The stress distributions on a human mandible for 18 load cases under two different boundary conditions (mouth open and closed), using the three dimensional finite element modeling were studied. Also, the expected fracture loads for each load cases were calculated by using the Von-Mises yield criterion. The model of a mandible with all teeth was composed of 2402 hexahedron elements and 3698 nodes. CAD techniques were used to analyze the 3-dimensional results. The conclusions of this study were as follows: 1. In the mouth open state, the maximum stress occured at the condyle neck; when the lateral load was exerted, the maximum stress occured at the load side condyle. 2. In the mouth closed state, when the loads were exerted on the mandibular body and chin, the maximum stress occured at the loaded area, and when the loads were exerted on the angle and ramus, the maximum stress occured at the condyle neck. 3. The expected fracture loads in each load case were calculated using the Von-Mises yield criterion, and it was confirmed that the mandible in the mouth open state was more easily fractured than that in the mouth closed state, and the expected fracture loads are lesser in the cases that load direction is parallel at mandibular plane than 45°. 4. The magnitudes of the expected fracture loads increased in the order of angle, ramus, body and chin in case of the mouth closed state, while chin, body, angle and ramus in case of the mouth open state. 5. The Von-Mises stress concentration regions analyzed by F.E.M. corresponded well with the results of clinical studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.228-228
• /
• 2012

인공관절은 노인성 질환이나 자가 면역질환, 신체적인 외상 등으로 인하여 발생하는 관절의 손상 부위를 대체하기 위하여 고안된 관절의 인공 대용물이다. 인공 관절 중 인공 고관절의 경우 관절 운동을 하는 라이너(Liner)와 헤드(Head) 부분이 마모에 관여하여 인공관절의 수명에 영향을 미치게 되는데, 헤드 소재로서는 Co-Cr-Mo 합금이, 라이너 소재로서는 고분자 소재인 UHMWPE (Ultra High Molecular Weight Polyethylene)가 주로 사용되고 있다. 이러한 MOP (Metal-On-Polymer) 구조의 인공관절의 경우, 충격흡수의 장점이 있는 반면, 관절 운동시 발생하는 UHMWPE의 wear debris에 의한 골용해로 인하여 관절이 느슨해지는 문제점이 발생하여 재시술을 필요로 하게 된다. 또한 메탈 헤드의 마모로 인한 금속이온의 용출은 세포 독성의 문제를 야기하여 인공관절의 수명을 낮추는 또 하나의 요인이 되고 있다. 이러한 문제점들을 해결 하기 위하여, 본 연구에서는 PIII&D (Plasma Immersion Ion Implantation & Deposition)공정을 이용하여 Co-Cr-Mo 합금 소재 위에 niobium nitride (NbN) 박막을 증착하여 상대재인 UHMWPE의 마모를 줄이고자 하는 연구를 진행하였다. 마모량의 감소를 위하여, 박막을 증착하기 전에 Co-Cr-Mo 합금 위에 질소를 이온주입 하는 pre-ion implantation 공정을 도입하였으며, Co-Cr-Mo 합금과 NbN박막 사이의 접착력을 증가시키기 위하여 박막의 증착 초기에 이온주입과 증착을 동시에 수행하는 dynamic ion mixing공정을 수행하였다. 실험 결과 pre-ion implantation 공정을 도입한 경우 현재 상용화 되어있는 Co-Cr-Mo 합금에 비하여 마모량을 2배 이상 감소시키는 것을 확인 할 수 있었으며, dynamic ion mixing 공정을 도입한 경우 장시간의 마모 시험에서도 UHMWPE의 마모량을 2배 가까이 줄일 수 있었다.