• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.407-419
• /
• 2014

The analysis of shape before and after heating, Surface moisture content, Moisture weight change and surface heat distribution by fixed type microwave heating in forms of flat veneer and veneer roll of Korean pine, pitch pine, larch and yellow poplar was conducted. The results were as follows: In case of flat veneer, the quality after microwave heating was comparatively good, but it was somewhat warped. These phenomena may be due to transformation by nonuniform drying stress and stronger effect of local irradiation on the veneers when heating veneer owing to the characteristics of fixed type microwave equipment. In case of the features of roll-shaped veneer heated by microwave, the quality after heating was comprehensively excellent. Especially there was no warping unlike flat veneer. Heat distribution and diffusion were also very stable for roll-shaped veneer and such heat distribution had much influence on surface moisture content and moisture weight loss. Accordingly, the veneer roll would show sufficient drying efficiency in fixed type microwave equipment through a scrutinized examination on generating power and irradiation time according to species and thickness of veneer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.491-498
• /
• 2012

Recently, many papers have been proposed in order to improve the OFDM system performance in T-DMB DOCR (Digital On Channel Repeater), by using removing the feedback signal so that the transmitter power can be increased or by using the equalizer to remove ICI. Despite these efforts, however, signal quality at the receiving terminal has not been improved because of constellation smearing in T-DMB DOCR. In this paper, in order to suppress constellation smearing, we propose an effective equalizer algorithm that can improve system performance. We perform adaptive channel estimation and non-coherent decision directed noise cancellation method that can estimate the channel subsequently during data symbols period in the frequency domain. So we can obtain better quality of the signal at the receiving terminal. In order to secure QoS(Quality of Service) required in T-DMB handsets, we evaluate SNR and BER in T-DMB DOCR(Digital On Channel Repeater) and verified by simulation. In this simulation results, this system is satisfied the performance of BER=$10^{-5}$ at less than SNR=14 dB at the receiver after compensation of phase noise -18 dBc.

• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.153-157
• /
• 2017

An infrared camera and laser common-path optical system is applied to DIRCM (directional infrared countermeasures), to increase boresighting accuracy and decrease weight. Thermal effects of a laser beam in a common-path optical system are analyzed and evaluated, to predict any degradation in image quality. A laser beam with high energy density is absorbed by and heats the optical components, and then the surface temperature of the optical components increases. The heated optical components of the common-path optical system decrease system transmittance, which can degrade image quality. For analysis, the assumed simulation condition is that the laser is incident for 10 seconds on the mirror (aluminum, silica glass, silicon) and lens (sapphire, zinc selenide, silicon, germanium) materials, and the surface temperature distribution of each material is calculated. The wavelength of the laser beam is $4{\mu}m$ and its output power is 3 W. According to the results of the calculations, the surface temperature of silica glass for the mirror material and sapphire for the lens material is higher than for other materials; the main reason for the temperature increase is the absorption coefficient and thermal conductivity of the material. Consequently, materials for the optical components with high thermal conductivity and low absorption coefficient can reduce the image-quality degradation due to laser-beam thermal effects in an infrared camera and laser common-path optical system.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.35-44
• /
• 2005

A software developer can use a performance evaluation tool to elevate development speed and improve qualify of softwares. But, evaluation results that most performance evaluation tools offer are complicated strings. Therefore, a developer cannot intuitively understand the meanings of the results and must make much times and efforts in analysing the result. In this paper, we propose a report view generator that can transform and provide the text-based performance evaluation results for softwares with various graphic-based views. Our proposed generator consists of a screen generator that creates a structural XML document about the text-based performance evaluation results and a log analyzer that makes various report view through the created XML evaluation document. Because the XML evaluation result document can express the result information structured according to performance evaluation items for resources of softwares, it can have flexibility in offering and integrating the result information for the items. Through the suggested report view generator, developers can intuitively understand and analysis performance evaluation results of embedded software. And they can easily and quickly improve software quality and improve development efficiency of softwares.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.782-785
• /
• 2011

Needs for MG(Microgrid) development are increasing all over the world as a solution to the problems including the depletion problem of energy resources, the growing demand for electric power and the climatic and environmental change. Especially Photovoltaic power is one of the most general renewable energy resources. However there is a problem of the uniformity of power quality because the power generated from solar light is very sensitive to climate fluctuation (variation of insolation and duration of sunshine, etc). As a solution to the above problem, ESS(Energy Storage System) is considered generally, but it has some limitations. To solve this problem this paper suggests a hybrid estimation method of photovoltaic power generation according to two climatic factors, i.e. insolation and sunshine. This result seems to help design the appropriate capacity of ESS and estimate the proper switching time between DC and AC power in the premises power system and thus maintain the uniformity of power quality.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.06a
• /
• pp.233-239
• /
• 2001

최근 대부분의 회사들은 업무를 수행하는데 필요한 지식과 노하우를 공유하고 재사용하기 위하여 지적 자산 관리의 중요성을 인식하고 있다. 특히 고도로 지식 집약적인 업종이라 할 수 있는 IT컨설팅 회사에서는 지적 자산의 관리가 다른 어떤 회사에서보다 큰 중요성을 가지게 된다. 컨설팅 회사에 있어서 검증이 완료된 지적 자산의 공유 및 지능적이면서도 신속한 검색은 컨설팅 서비스의 품질과 고객 만족에 직결되는 중요한 요소이다. 따라서 대부분의 컨설팅 회사들은 자사의 지식 자산을 관리하기 위하여 많은 노력을 기울이고 있다. 본 논문의 목적은 IT 컨설팅 회사예서 관리되는 다양한 형태의 지적 자산들을 중앙 관리하여 설친 고객 사이트에 흩어져 프로젝트를 수행하는 컨설턴트들이 공유할 수 있도록 함으로써 컨설팅 서비스의 생산성과 품질들 높이고자 하는데 있다 이를 위하여 건설팅 회사에서 관리되는 모든 지적 자산의 재고를 조사하여 모델링하고 이를 쉽게 저장하고 검색할 수 있는 시스템 아키텍처를 제안한다. 제안된 아키텍처를 NT 기반에서 Index server를 이용하여 시스템으로 구현하였다 (KMSCR: A Knowledge Management System for managing Consulting Resources). KMSCR에서는 컨설턴트가 찾고자 하는 검색어를 입력하면 다양한 포맷의 (.doc, .ppt, xls, .rtf, .txt, .html 등과 같은) 결과물을 관련성이 높은 순서대로 출력해 줌으로써 컨설팅 리소스를 효과적으로 재사용할 수 있도록 도와 준다. 또한 검색 시에는 미리 등록된 키워드 뿐 아니라 본문 내의 텍스트 검색까지 가능하게 함으로써 컨설팅 리소스에 대한 보다 효과적이고 효율적인 검색을 가능하게 한다.간을 성능 평가 인자로 하여 수행하였다. 논문에서 제한된 방법을 적용한 개선된 RICH-DP을 모의 실험을 통하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.(actual world)에서 가상 관성 세계(possible inertia would)로 변화시켜서, 완수동사의 종결점(ending point)을 현실세계에서 가상의 미래 세계로 움직이는 역할을 한다. 결과적으로, IMP는 완수동사의 닫힌 완료 관점을 현실세계에서는 열린 미완료 관점으로 변환시키되, 가상 관성 세계에서는 그대로 닫힌 관점으로 유지 시키는 효과를 가진다. 한국어와 영어의 관점 변환 구문의 차이는 각 언어의 지속부사구의 어휘 목록의 전제(presupposition)의 차이로 설명된다. 본 논문은 영어의 지속부사구는 논항의 하위간격This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.terpolation performance of CNN was relatively

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.899-906
• /
• 2020

The WSS lateral examination is important for diagnosing spinal disorders. Recently, long-length detectors for large-area diagnose have been popularized to effectively reduce the exposure dose and examination time. It can be applied very efficiently to examinations of patients with high risk of falls, children, and adolescents. However, since the image is acquired through a single irradiation, the volume of cervical vertebra is relatively smaller than the lumbar due to the geometrical anatomy of the spine. Therefore, this study intends to fabricate an additional filter using 3D printing technology and copper filament to obtain uniform image quality in the WSS lateral examination and to analyze the results. 3D printing technology is able to easily print a desired shape, so it is widely used in the entire industrial field, and recently, a copper filament has been developed to confirm the possibility as an additional filter. In the WSS lateral examination, CNR and SNR were excellently measured when the additional filter was applied, confirming the possibility of using the additional filter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.83-90
• /
• 2024

This study investigates the 3D printing characteristics of strain hardening cement composites (SHCC) reinforced by PVA fibers. Three SHCC mixtures with diverse fiber volume fractions (1.0% for F1.0 mixture, 1.5% for F1.5 mixture, and 1.8% for F1.8 mixture) were designed. Except for the F1.0 mixture, all mixtures met the necessary conditions for multiple micro-cracking, with higher fiber volume fractions more readily satisfying these conditions. The flow values of three SHCC mixtures were within the 3D printable range of 120~160 mm, exhibiting decreased flow values with increasing the fiber volume fractions. Observation of the printed SHCC surfaces indicated that the F1.0 mixture had a Level-3 (good) rating, while F1.5 and F1.8 were rated as Level-2 (average). Higher fiber volume fractions resulted in poorer surface quality, thus, further research needs to be performed for modulating SHCC mixture suitable for 3D printing. The uniaxial tension behavior showed that the F1.0 mixture failed at lower strain, whereas F1.5 and F1.8 exhibited higher strain performance with multiple micro-cracks occurring.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.960-967
• /
• 2012

Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.94-94
• /
• 2009

전기 에너지를 기계적 에너지 변환하고 또한, 기계적 에너지를 전기 에너지로 변환할 수 있는 압전 세라믹스는 압전 변압기 (piezoelectric transformer), 초음파모터, 센서등과 같은 응용분야에 넓게 사용되고 있다. 특히, 압전 변압기의 설계와 제조방법에 대해서는 이미 상당히 많은 연구가 수행되어 왔다. 특히, 전원장치에 있어서는 현재 주요부품으로 사용되고 있는 권선형 변압기와 같은 전자 변환기의 대체품으로서 누설손실이 없는 압전세라믹스 소재의 특성을 이용한 압전변압기의 개발과 응용연구가 국내외적으로 활발히 진행 중이다. 하지만 지금 까지 널리 사용된 PZT계 압전 세라믹스는 환경문제에 있어서 문제점을 가지고 있다. $1200^{\circ}C$ 이상에서 소결되는 PZT계열의 압전세라믹스 소재를 사용한 전자부품의 60~70%이상이 PbO로 구성되어 있기 때문에 $1000^{\circ}C$ 부근에서 급격한 휘발특성을 보이는 PbO로 인한 환경오염문제가 대두되고 있다. 압전변압기, 초음파모터등에 사용될 수 있는 무연계 압전재료 중에 PZT 압전소자의 기능을 대체할 만한 물질로는 높은 큐리온도와 우수한 압전특성을 보이는 $(Na,K)NbO_3$세라믹스가 가장 유력한 것으로 알려져 있다. 즉, 압전변압기용 조성 세라믹스는 높은 에너지 변환효율을 위해서 전기기계 결합계수($k_p$)가 커야 되며, 발열에 의한 온도 상승을 억제하기 위하여 기계적 품질계수($Q_m$)가 큰 것이 바람직하다. 또한, 높은 전류를 발생하기 위해서는 유전상수가 커, 압전변압기의 출력측 정전용량을 크게 하여야 한다. 본 연구에서는 무연계 압전세라믹스를 개발하고, 이를 이용한 전력밀도(power density)가 높은 무연계 압전변압기를 제작하여 그에 대한 전기적 특성을 조사하였다. 따라서 본 연구에서는 무연 압전변압기용 압전 세라믹스를 개발하기 위해 뛰어난 압전 및 유전특성을 가진 무연$(Na,K)NbO_3$계 세라믹스를 기본조성으로 하였고, KCN을 복합 첨가하여 볼 변화에 따른 미세구조, 압전 및 유전특성을 조사하고. 가장 우수한 조성으로 비납 압전변압기를 제작하여 전기적특성을 조사하였다.