• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.51-59
• /
• 2004

In the study, there has been a sharp upward trend in road maintenance cost as the expansion of road networks increases. Running a pavement management system(PMS) is indispensable for efficient and scientific maintenance of the whole road networks with limited maintenance budgets. With a PMS, a maintenance plan should be drawn up after surface conditions are precisely examined and analyzed. The majority of the present PMSs are run by the fact that experts first examine surface conditions on sites, and then enter results into systems. However, considering the actual circumstances of the present time and the increase in paved road hereafter, it is inefficient that experts examine the whole paved roads in person and long-lasting PMSs can not be kept up. As a result, after analyzing the accuracy of 3-D coordinates representing road surfaces that was decided using multi orientation and digital photogrammetry, the average of standard errors turned out to be 0.0427m on the X-axis, 0.0527m on the Y-axis and 0.1539m on the Z-axis. It was found to be good enough to be put to practical use for maps drawn on scales below 1 :1000, which are being currently made and used within the country, and GIS data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.271-271
• /
• 2011

최근의 유출해석은 지리정보체계(GIS, Geographic Information System) 및 지형자료(DEM, Digital Elevation Model 등) 구축의 발달로 대부분 격자 기반의 분포형 강우-유출 모형을 통해 이루어지고 있으며, Rodriguez-Iturbe and Valdes (1979)에 의해 소개된 통계물리학적 접근방법인 지형학적 순간단위도(GIUH)모형 역시 DEM을 기반으로 한 연구가 꾸준히 진행되어 온 실정이다(Maidment, 1993; D'odorico and Rigon, 2003; Di Lazzaro, 2010). 이러한 격자 기반 모형들은 대부분 8방향 최급경사에 기초한 흐름방향도를 기반으로 물의 유동을 표현한다. 8방향법에 의해 결정된 흐름방향도를 이용할 경우 각 격자 중심에서 유역출구 까지의 배수로경로길이를 비교적 쉽고, 빠르게 계산할 수 있다는 장점을 가지나, 공간해상도(격자 규모)에 따라 상이한 결과를 나타내는 것을 예상할 수 있다. 따라서 본 연구에서는 DEM의 공간해상도에 따른 배수경로길이의 통계적 변화양상을 살펴보고, 이로부터 실제 수문사상의 통계적 특성과 Di Lazzaro(2010)의 특성유속산정 공식을 이용해 지표면과 하천의 특성유속을 산정하였다. 산정된 특성유속들을 D'odorico and Rigon(2003)이 제시한 값과 비교함으로써 격자 기반의 GIUH 모형의 적용에 있어서 적정 공간해상도를 찾고자 하였다. 대상유역으로는 국제수문개발계획(IHP, International Hydrological Project)의 금강수계 보청천 유역 중 이평수위국을 출구로하는 소유역을 선정하였으며, DEM의 공간해상도는 수치지형도의 축척을 고려하여 1: 5,000의 경우 5, 10, 15, 20m를, 1: 25,000의 경우 20, 30, 50, 100, 150, 200m로 결정하였다. 분석 결과 격자 형태 GIUH의 특성유속을 산정을 위한 적정 공간해상도는 1:5,000의 경우 5m를, 1:25,000의 경우에는 20～50m의 범위를 적용하는 것이 타당할 것으로 판단된다.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.51-58
• /
• 2014

In-situ capping is a method to stabilize contaminated sediments by isolation. Few researches on the in-situ capping have been performed, although the engineering approach is still required to prevent the release of contaminants. In this study, hydraulic model test were conducted by using a wave generator to observe the change of cap thickness which is important factor in design of capping. Sands with particle size between 0.075 to 2 mm as capping materials were used to observe the change of capping thickness by waves. The experimental results show that the surface of capping materials is similar to wave form. The more wave height increases, the more erosion of capping materials increases.

• Journal of the Korean Society of Safety
• /
• v.8 no.1
• /
• pp.80-87
• /
• 1993

This paper summarizes an experimental and analytical study on the application of viscoelastic dampers as energy dissipation devices in structural applications. Shaking table tests are carried out on the viscoelastically damped structure and the obtained structural responses are compared to those of the inelastic analysis results for the same test structure with no dampers added. It can be concluded the viscoelastic dampers are effective in reducing excessive vibrations of structures under strong earthquake ground motions. It is also observed that the increase in structure's stiffness by the addition of dampers can not contribute to improving the seismic response of a structure. In general. the reduction of the seismic response by adding the dampers to the structure is mostly resulted from the increased damping effect. It is found that the modal strain energy method can be used to reliably predict the equivalent structural damping. and the seismic response of a viscoelastically damped structure can be accurately estimated by conventional modal analysis techniques.

• Korean Journal of Remote Sensing
• /
• v.8 no.2
• /
• pp.93-104
• /
• 1992

Although the Transverse Mercator(TM) coordinate is used on standard topogrphic maps of Korea as a supplement to regular latitude-longitude coordinate, the use of this TM coordinate system is rather limited to a single coordinate zone that spans only two degrees of longitude. With growing applications of a variety of digiral geographic data, such as satellite remote sensor data, a Cartesian or rectangular coordinate system is more effective to deal with such data type than angular coordinate system. An unified rectangular coordinate system based on the Transverse Mercator projection is designed to cover the whole area of the Korea Peninsula as a single coordinate zone. Considering the width of the peninsula and the distribution of scale error, the origin of the coordinate is determined to 127$^{\circ}$30' east and 38$^{\circ}$ north. Coordinate conversion procedure is discussed along with the corresponding scale error term.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.5
• /
• pp.5-12
• /
• 2011

Water content is one of the significant engineering properties of soil for predicting the behavior of soil matrix. Conventional drying oven can be widely used to obtain the values by drying the soil specimens for 16 to 24 hours at $105^{\circ}C$. Although a number of experimental data has been accumulated for the conventional method of drying soil for water contents, shortcomings of the method are still hard to overcome such as long drying time for in situ use and the difficulty of taking prompt actions against emergency cases. Recently, ASTM and JGS have established microwave oven drying techniques for obtaining water contents to cope with those problems. And the reliability evaluation study has been also performed on the microwave oven drying for water contents. Feasibility study of the microwave oven drying was performed to confirm the process of the technique with Jumunjin sand, kaolinite, bentonite, weathered granite soil, and organic soil. Investigation was also conducted on the factors affecting and enhancing the reliability of the technique.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.151-160
• /
• 2003

The application of more complex radiotherapy techniques using multileaf collimation (MLC), such as 3D conformal radiation therapy and intensity-modulated radiation therapy (IMRT), has increased the significance of verifying leaf position and motion. Due to thier reliability and empirical robustness, quality assurance (QA) of MLC. However easy use and the ability to provide digital data of electronic portal imaging devices (EPIDs) have attracted attention to portal films as an alternatives to films for routine qualify assurance, despite concerns about their clinical feasibility, efficacy, and the cost to benefit ratio. In this study, we developed method for daily QA of MLC using electronic portal images (EPIs). EPID availability for routine QA was verified by comparing of the portal films, which were simultaneously obtained when radiation was delivered and known prescription input to MLC controller. Specially designed two-test patterns of dynamic MLC were applied for image acquisition. Quantitative off-line analysis using an edge detection algorithm enhanced the verification procedure as well as on-line qualitative visual assessment. In conclusion, the availability of EPI was enough for daily QA of MLC leaf position with the accuracy of portal films.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.59-71
• /
• 2019

In Mountainous Districts Management Act of Korea Forest Service, slope and elevation criteria are operated to regulate the indiscriminate use of risky land parcels when forestland is converted to other land use types. However, there is a limitation in considering topographical variation with only such two indices in the land parcel. Therefore, in order to supplement insufficient criteria, the slope type standard was developed using Catena, and the ecological condition improved terrain standards. Firstly, the ratio of 'risky slope' in a target forestland parcel was defined to decrease the risk of disasters such as landslides. Secondly, the standard of the ecological location condition was proposed as ecological score by integrating age, diameter and soil depth classes in the target forestland parcels. Thereby, we could prepare reasonable standards that can reduce forestland disasters and ecological damages, as suggesting new topographical and ecological assessment methods for forestland use conversion.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.123-132
• /
• 1999

With the rapid increases of the amount of data and computing, the parallelization of the computing algorithm becomes necessary more than ever. However the parallelization had been conducted mostly in a super-computer until the rod 1990s, it was not for the general users due to the high price, the complexity of usage, and etc. A new concept for the parallel processing has been emerged in the form of K-clustering form the late 1990s, it becomes an excellent alternative for the applications need high computer power with a relative low cost although the installation and the usage are still difficult to the general users. The mapping algorithms (cut, join, resizing, warping, conversion from raster to vector and vice versa, etc) in GIS are well suited for the parallelization due to the characteristics of the data structure. If those algorithms are manipulated using PC-clustering, the result will be satisfiable in terms of cost and performance since they are processed in real flu with a low cos4 In this paper the tools and the libraries for the parallel processing and PC-clustering we introduced and how those tools and libraries are applied to mapping algorithms in GIS are showed. Parallel programs are developed for the mapping algorithms and the result of the experiments shows that the performance in most algorithms increases almost linearly according to the number of node.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.3-10
• /
• 2008

Cadastral map is a public book that has been composed by continuous parcel having location, number, classification, boundary and an area based on Cadastral Law. A few years ago, cadastral map had been managed by form drawn on 2 dimension plane paper with 7 regular scales. Recently as computer systems are upgrading, cadastral map was able to have a chance to develope one step. Its type has been remade from raster to vector. In result, the cadastral map of vector type becomes to apply variously. Therefore, digital cadastral map has been ready a system to be use with multi-propose by KLIS(Korean Land Information System). In this research, it concretely want presentation of status using land more than original parcel on basic coordination cadastral map and KLIS(Korean Land Information System). The cadastral map is composed as parcel unit was applied by new presentation technique to "Model Research on One Parcel Presentation Technique for Land Status of Cadastral Map". The function of cadastral map on One Parcel Presentation Technique which is not only location relation of possession right and expression of states using land in 28 classifications demonstrated on the cadastral law but also used as foundation data of GIS construct business is developed by lines and classification of parcel to center around public sites of roads, rails, drains and rivers. especially, this research is composed of technique elevation and development of One Parcel Projection Technique of cadastral map in using object of roads among public sites.