• Journal of KSNVE
• /
• v.1 no.2
• /
• pp.102-106
• /
• 1991

최근의 사회적 경제적인 급속한 발전에 따라 환경 소음에 대한 사람들의 관심도가 점차 증가되고 있다. 이로 인하여 사람들이 항상 접촉하게 되는 가전 제품 에 대한 소비자의 욕수도 제품의 성능적인면도 물론이지만 소음진동 및 디자인에 대하여도 지대한 관심이 모아지고 있다. 가전 제품에 있어서 주된 소음원은 홴 및 압축기 덮개의 진동등으로 파악할 수 있다. 특히, 홴은 냉각용, 송풍용으로서 거의 모든 가전제품에 쓰여지고 있다. 냉각용으로 사용되는 형식은 주로 축류 홴이다. 축류 홴은 다른 종류보다 소음이 크기 때문에, 저소음 축류 홴의 BPF(Blade Passing Frequency; 날개 통과 주파수)가 갖는 소음 특성을 연구하여야 한다. 이를 위해 축류 홴의 날개 갯수를 조절하면 설치된 통내에서의 BPF가 어떠한 형태로 변화하는가를 알아보고, 이에 따른 저소음화 대책을 검토하고자 한다. 홴은 그 덮개에 대하여 유량 및 소음에 관한 최적의 위치가 존재하는데, 문이 잠겨 있을 때에는 그 소음 레벨의 편차가 몹시 크게 된다. 한편 날개 갯수, 모터의 회전속도 및 통의 전달 함수 등을 감안하여 날개 통과 주파수(BPF)를 조정하면, 각종 가전 제품의 홴에 의한 방사를 저감시킬수 있다.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2001

축류 홴은 산업에의 응용 범위가 매우 넓은 장치로서 HVAC 기기를 중심으로 다양한 분야에서 이용되고 있다. 저소음 홴 설계는 품질 고급화 요구 및 법적 규제에 따라 매우 시급한 과제이다. 그러나 홴 소음 해석의 난해함과 더불어 복잡한 주변 기기(쉬라우드 및 열교환기 등)와의 상호 작용 때문에 현재까지는 주로 실험적 접근을 통해 홴의 저소음화를 추구하였다.(중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.264-269
• /
• 2001

Axial fans are widely used in household electrical appliances due to their easy usage and high flow rate for cooling capacity. At the same time, the noise generated by these fans causes one of serious problems. In order to calculate the noise of a fan, we develop the software IFD - Intranet Fans Design. With this software we can design, analysis the performance and predict the noise of fan. The prediction model, which allowed the calculation of acoustic pressure at the blade passing frequency and it's higher harmonic frequencies, has been developed by Lowson's equation. To calculate the unsteady resultant force of the blade, time-marching free-wake method is used. The objective of this study is to calculate the effects of number of blades, rotating velocity, and sweep angle on the noise of fan..

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.17-22
• /
• 2001

Tube axial fans were designed to provide effective cooling for a personal computer by using $DasignFan^{TM}$ software. With basic input parameters of flow rate, pressure rise, rotating speed, and fan diameter, three dimensional geometry of blade is automatically generated and its performance and overall sound pressure level are predicted. In this steady, the newly developed fans of 60 mm and 80 mm diameters were proved to provide a very promising mode of low noise, compared with manufactured products.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.10
• /
• pp.1281-1292
• /
• 2001

Experiments were done for the comparison of performance and flow characteristics between a two -stage axial flow fan and a counter-rotating axial flow fan. Each stage of the two -stage axial flow fan used fur the present study has an eight bladed rotor and thirteen slater blades. The front and the rear rotor of the counter - rotating axial flow fan have eight blades each and are driven by coaxial counter ro latins shafts through a gearbox located between the rear rotor and the electric motor. Both of the two axial fan configurations have identical rotor blades and the same operating condition fur the one -to-one comparison of the two. Performance curves of the two configurations were obtained and compared by varying the blade pitch angles and axial gaps between the blade rows. The fan characteristic curves were obtained following the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fa n flow characteristics were measured using a five-hole probe by a non-nulling method. The velocity profiles between the hub and tip of the fans were measured and analyzed at the particular operating condition s of peak efficiency, minimum and maximum pressure coefficients. The peak efficiency of the counter-rotating axial fan was improved about 2% respectively, compared with the two stage axial fan. At the minimum pressure coefficient point of the two stage axial fan, the fan inlet flow patterns show that axial velocity highly decreased in the vicinity of the blade tip region. Also, the reverse flow took place at the blade tip.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.3
• /
• pp.325-337
• /
• 2000

A study was done on the numerical and experimental analyses of the aerodynamic characteristics of a counter rotating axial fan. The numerical analysis uses the frequency domain panel method developed for the aerodynamic analysis of interacting rotating systems, which is based on the unsteady lifting surface panel method. Each stage of interaction involves the solution of an isolated rotor, the interaction being done through the Fourier transform of the induced velocity field. Numerical results showed good agreements with other experimental data for single and counter rotating propeller systems. And they were compared with the experimental results of the counter rotating axial fan studied in the present paper. The performance test was carried out based on the Korean Standard (KS B 6311). It was focused on the relative efficiency increase of a counter rotating system for a single rotating one, and effects of the axial distance between the front and rear rotors on overall fan performances were investigated. As a result, it was shown that the counter rotating axial fan has the efficiency 14% higher than the single rotating one at peak efficiency points.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.5
• /
• pp.30-36
• /
• 2008

Axial fan without static blades requires the duct as a guidance for unskewed inflows. This work examined the geometric effects of a duct guided the in and out flows through an impeller. The present methodologies are computational predictions with parallel work by experimental validation. Several different positions of a rotor in a duct are proposed for plausible models of a rotor inside a duct. The optimum axial position of an impeller in a duct is found at the #4 model where the impeller lies on the inlet edge of a circular duct. The model shows a wider inlet area. The result of computational prediction is in good agreement with experiment measurement.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.30-35
• /
• 2010

The aerodynamic performance of axial flow fans for outdoor unit of air-conditioner is investigated by numerical and experimental approaches in this study. The pressure drop and volumetric flow rate are compared each other in several different conditions and fan speeds. It is shown that the predicted fan performances are quite well matched with the experimental results. It is also shown that the curvature of the fan arc and hub height have significant influences on the flow distribution after hub. By the results of this study, it can be suggested that several ways to improve the aerodynamic performance of the axial flow fan can be found using the numerical analysis.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.873-879
• /
• 2000

Experimental investigation was conducted to study the effects of pitch angle maximum camber on the performance and noise of an axial-flow fan used in outdoor-unit of air -conditioner. For this study the axial-flow fan whose pitch angle can be varied was made and the Specific sound Pressure Level and other coefficients were measured using the anechoic fan tester. It is found that pitch angle affects more severly than the maximum camber on the fan performance. On the while the maximum camber affects much on the specific sound power level. Present results show that it is important to choose the optimum pitch angle and maximum camber to design the high-performance and low-noise axial-flow fan and specific noise measured in the anechoic fan tester can be sued effectively for the design of low-noise fan.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.15-20
• /
• 2001

홴(fan)은 모터로부터 회전력을 전달받아 공기동력인 풍량과 정압을 발생시켜 발열부품의 냉각 및 환기용으로 산업현장과 가전기기에서 널리 사용되고 있다. 과거 산업현장에서 주로 사용되어지던 송풍기가 가전기기에 적용되면서 홴에 대한 관심이 더욱 증폭되었는데 특히 국내에서 독자적인 소형 홴 연구가 본격적으로 시작된 것도 이 때이다. 가전에서의 홴은 고효율 뿐 만 아니라 주로 저소음화에 대한 연구에 초점이 맞추어져 있는데 이는 기존의 산업현장의 송풍기가 주로 풍량과 정압에 목표를 두고 개발해 왔던 것도 한 이유지만 구조적인 안정성 때문에 소음을 고려한 설계가 한계가 있었기 때문으로 저소음홴에 대한 응용기술이 충분히 발달하지 못했기 때문에 송풍기 기술을 그대로 받아들인 초창기 가전용홴은 소음이 높았다. 또한 가전기기는 모든 연령층이 사용하기 때문에 소음이 큰 제품은 항상 소비자 클레임의 원인이 되기 때문이다.(중략)