• 제목/요약/키워드: 축대칭 유동

검색결과 178건 처리시간 0.036초

초음속 이젝터 펌프 유동에 관한 수치해석 (A CFD Study of the Supersonic Ejector-Pump Flows)

  • 이영기;김희동;서태원
    • 한국추진공학회지
    • /
    • 제3권4호
    • /
    • pp.58-66
    • /
    • 1999
  • 초음속 이젝터 유동특성은 압축성, 비정상성, 충격파 둥으로 인하여 충분히 알려져 있지 않다. 종래의 이론적/실험적 연구결과들은 대부분 1차원 가정 하에서 얻어진 것들이며, 현재까지 수치계산법을 이용하여 이젝터 내부 유동장을 해석한 실례가 많지 않다. 뿐만 아니라 기존의 수치계산 결과들은 2차유동의 질량유량이 매우 작거나 없는 단순한 유동장에 대한 것들이었다. 본 연구에서는 초음속 이젝터-펌프 유동장을 수치적으로 해석하기 위하여 축대칭 수치계산 모델을 이용하였다. 수치계산은 축대칭 압축성 Navier-Stokes 방정식에 유한체적법을 적용하였으며, 표준형 $\kappa$ -$\varepsilon$ 난류모델을 이용하였고, 2차유동의 질량유량을 변화시켜 1차유동과 2차유동의 질량비의 변화에 따른 이젝터 내부 유동장의 변화를 조사하였다. 그 결과, 2차목을 가지지 않는 일정 단면적의 혼합부를 가지는 이젝터의 경우, 이젝터 내부의 유동장 특성은 2차유동의 질량유량의 변화와 거의 무관하게 나타났다. 그러나 2차목을 가지는 경우는 2차유동의 질량유량의 증가에 따른 노즐출구 주위에서 배압으로 인하여 이젝터 내부 유동장이 크게 변화하였다.

  • PDF

액적 내부 유동 가시화를 위한 축대칭 형상 왜곡 보정에 관한 연구 (Study on Correction of Optical Distortion for Flow Visualization inside Axisymmetric Droplet)

  • 김영현;고한서
    • 한국가시화정보학회지
    • /
    • 제12권3호
    • /
    • pp.21-25
    • /
    • 2014
  • Optical distortion of experimental results can be found in many studies. Thus, a method of the optical correction for visualization of an axisymmetric droplet was developed in this study. The correction method was derived to extract refracted vectors. In order to obtain the refracted vectors, a projection vector and a normal vector should be calculated. Then, a distortion distance can be found by the calculated refracted vector and Snell's law. The developed method was also verified by the simulation and the experimental results to apply for a liquid droplet which was formed at a nozzle tip.

고속 축대칭 비행체 설계를 위한 점성 Inverse 기법 연구 (A Study on the Viscous Inverse Method for the High Speed Axisymmetric Body Design)

  • 이영기;이재우
    • 한국전산유체공학회지
    • /
    • 제2권2호
    • /
    • pp.35-43
    • /
    • 1997
  • An efficient inverse method for 1.he supersonic/hypersonic axisymmetric body design is developed for the parabolized Navier-Stokes equations. The developed method is examined numerically for three extreme testcases in the supersonic(M/sub ∞/=3.0) and hypersonic(M/sub ∞/=6.28) speeds. The first one is a negative pressure distribution near a vacuum pressure and the second one is a positive pressure distribution over the whole region of the body. The last one is the case of abrupt change of pressure distribution to zero in the forward region of the body. These testcases show the robustness of the method. By introducing a regular-falsi method and by using a not-fully converged inverse solution, the convergence behavior was greatly improved.

  • PDF

균일 두께로 자성유체가 피막된 평면 벽 주의의 축대칭 정체 유동 (AXISYMMETRIC STAGNATION FLOW NEAR A PLANE WALL COATED WITH A MAGNETIC FLUID OF UNIFORM THICKNESS)

  • 고형종;김경훈;김세웅
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2007년도 추계 학술대회논문집
    • /
    • pp.39-44
    • /
    • 2007
  • A similarity solution of the Navier-Stokes equation for the axisymmetric stagnation flow near a plane wall coated with a magnetic fluid of uniform thickness is constructed. The shape functions representing the flow in two (magnetic and normal) fluid layer are determined from a third order boundary value problem, which is solved by the Runge-Kutta method with two shooting parameters. Features of the flow including streamline pattern and interface velocity are investigated for the varying values of density ratio, viscosity ratio, and Reynolds number. The results for the interface and wall shear stress, boundary layer and displacement thickness are also presented.

  • PDF

축대칭 물체 선단에서 발생하는 경계층 내 벽면 변동 압력에 관한 연구 (Wall Pressure Fluctuations of the Boundary Layer Flow at the Nose of and Axisymmetric Body)

  • 신구균;홍진숙;김상윤;김상렬;박규철
    • 소음진동
    • /
    • 제10권4호
    • /
    • pp.602-609
    • /
    • 2000
  • When an axisymmetric body moves through air the boundary layer near the stagnation region remains laminar and subsequently it goes through transition to turbulent. The experimental investigation described in this paper concerns the characteristics of wall pressure fluctuations at the initial stage of boundary layer flow including transition. Flush-mounted microphones are used to measure the wall pressure fluctuations at the transition and turbulent boundary layer region of a blunt axisymmetric body in the low noise wind tunnel. It if found from this study that the wall pressure fluctuations in the transition region is higher than that in the turbulent region.

  • PDF

2차원 축대칭 열 플라즈마 시뮬레이션을 이용한 플라즈마 토치 해석

  • 허민영;양상선;이해준
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.231.1-231.1
    • /
    • 2014
  • 열 플라즈마(thermal plasma) 는 저온 플라즈마(cold plasma)와 달리 이온과 전자와 중성입자들이 충분한 에너지 교환으로 인해 열평형 상태를 가진다. 열 플라즈마를 생성 시킬 때 전극 사이에서 아크방전을 시켜 제트 형태로 플라즈마를 발생시키는 것을 플라즈마 토치(plasma torch)라고 한다. 이러한 플라즈마 토치는 화학 원소 분해, 강판 절단, 유해 기체 분해 등으로 널리 사용되고 있다. 본 연구에서는 플라즈마 토치를 수치적으로 해석하여 플라즈마의 특성을 알아보았다. 수치해석적 접근방법으로 열 플라즈마는 LTE (local thermodynamic equilibrium)을 가정하였으며 one-fluid 이론을 적용하였다. 이때 사용된 코드는 DCPTUN으로서 $C^{+}^{+}$로 작성된 열플라즈마 유동의 특성해석 코드인 동시에 SIMPLE 알고리즘을 이용한 유체 코드이다. 시뮬레이션은 2차원 축대칭이며 정렬격자계 및 비정렬격자계 모두에서 사용이 가능하도록 되어있다. 또한 맥스웰 방정식을 통해 electromagnetic field를 풀도록 하여 RF 시뮬레이션이 가능하도록 하였다. 이와 같은 열 플라즈마 시뮬레이션을 통해서 플라즈마 토치의 특성을 알아보았다.

  • PDF

상세 화학반응 모델을 이용한 발사체 터빈 배기가스의 이차연소 해석의 축대칭 해석 (An Axisymmetrical Study on the Secondary Reaction of Launch Vehicle Turbine Exhaust Gas Using the Detailed Chemistry Model)

  • 김성룡;김인선
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.857-862
    • /
    • 2011
  • 상세 화학반응 모델을 이용하여 3차원 터빈 배기가스 유동을 2차원 축대칭 유동으로 가정하여 해석하였다. GRI의 35 화학종 217 단계의 상세 모델과 메탄 반응만을 간략화 시킨 11화학종 15단계 모델을 적용하여 비교하였다. 메탄 화학반응을 적용한 결과 저부에서 터빈 배기가스의 이차 연소가 나타났고 터빈 배기 노즐이 없는 경우에 비하여 온도가 600K 정도 더 높게 나타났다. 실제 3차원 문제에서는 국부적인 온도는 더 높을 수 있음을 의미한다. 화학 반응 모델에 따라 저부에서의 연소 영역과 화학종 분포도 약간 다르지만 저부에서의 이차 연소는 모두 포착하였다. 다만 간략화된 모델인 경우 엔진 플룸의 구조에 약간의 영향을 주는 것을 관측된다.

  • PDF

복합추진장치가 포함된 축대칭 물체 주위유동의 수치적 연구 (Numerical Study of the Flow Field Around an Axisymmetric Body with Integrated Propulsors)

  • 안종우;문일성;표상우;서정천
    • 대한조선학회논문집
    • /
    • 제36권4호
    • /
    • pp.1-8
    • /
    • 1999
  • 복합 추진장치가 포함된 경우와 포함되지 않은 경우에 축대칭 물체 주위 유동특성을 조사하기 위한 수치적 연구가 수행되었다. 비압축성 RANS 방정식을 유한체적법으로 해석하는 수치적 방법이 표준 $k-\varepsilon$ 난류모형을 이용하여 수행된다. 선체와 추진기의 상호작용은 패널법에 의하여 계산된 유기속도를 프로펠러 면에 분포하여 경계조건으로 처리하는 방법을 사용하였다. 수치적 결과로부터 얻어진 표면압력분포와 유속분포는 시험 결과와 비교된다. 본 연구에서 얻어진 수치계산 프로그램은 복합추진장치의 설계에 이용될 수 있다고 생각된다.

  • PDF

수직평판에 충돌하는 축대칭 초음속 제트의 수치 해석

  • 신완순;이택상;박종호;김윤곤
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2000년도 제14회 학술강연논문집
    • /
    • pp.20-20
    • /
    • 2000
  • 초음속 과소팽창 제트는 베럴충격파(Barrel shock), 팽창파(Expansion fan), 반사충격파(Reflected shocks), 마하디스크(Mach disc), 그리고 제트경계면(Exhaust-gas Jet boundary)로 이루어지는 여러 충격파 셀(Shock ceil)의 유동 형태를 나타난다. 이러한 초음속 과소팽창 제트가 수직 평판에 충돌하면 초음속 자유 제트와는 다른 변형된 유동장이 형성된다.

  • PDF

프로펠러-축대칭 포드의 추진 특성에 대한 수치 해석적 연구 (Computational Study on Propulsive Characteristics of Propeller Axisymmetric Pod Configuration)

  • 김덕수;김형태
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2001년도 춘계 학술대회논문집
    • /
    • pp.209-214
    • /
    • 2001
  • RANS 방정식의 수치해법을 사용해서 tractor와 pusher 방식의 포드 프로펠러 주위 점성유동을 계산함으로써 포드형 전동 추진기의 추진 특성을 파악하고자 하였다. 본 연구에 사용한 수치해석 방법을 검증하기 위하여 최근 국내에서 모형 실험이 수행된 포드 프로펠러 형상에 대해 수치계산을 수행하고, 계산으로부터 얻어진 tractor와 pusher 방식의 포드 프로펠러에 대한 단독 성능을 실험 결과와 비교하였다. 또한, 포드에 작용하는 압력 및 프로펠러 날개 주위의 유동을 분석함으로써, 포드가 프로펠러의 추진 성능에 미치는 영향과 tractor와 pusher 추진 방식의 특성을 살펴보았다.

  • PDF