• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1141-1151
• /
• 2001

본 논문에서는 효과적으로 선택된 초기 탐색 위치를 이용한 움직임 추정의 고속 알고리즘을 제안하였다. 제안된 알고리즘에서는 2$\times$2화소 블록 평균으로 부표본화 영상에서 움직임 벡터를 얻어 원영상 비율로 확대하고, 주위 블록의 움직임으로부터 예측 움직임 벡터를 구하여, 이 중에서 정합오차가 작은 것을 초기 탐색 위치로 선택한다. 그리고 선택된 초기 탐색 위치를 중심으로 회전 탐색을 시작하여, 연속 소거 알고리즘으로 탐색할 후보 블록을 선택하고, 부분 정합 왜곡 소거법을 사용하여 블록간 정합오차 계산량을 줄이면서, 고속으로 움직임 벡터를 추정한다. 알고리즘의 실제 적용에 있어서는 선택된 초기 탐색 위치를 중심으로 회전 탐색 패턴의 탐색 범위를 조절하거나, 매크로 블록 당 복잡도를 제한하여 계산량을 줄일 수 있다. 실험 결과, 제안된 알고리즘은 전역탐색 블록정합 알고리즘에 대하여 0.2dB 이하의 미소한 평균 PSNR 저하만을 발생하면서, FBMA 복잡도의 3% 이하의 평균 복잡도를 소요하였다. 이것은 3단계 탐색법에 대하여 40% 이하의 계산량이다. 그리고 실험 영상들의 각 프레임에 대해서도 비슷한 성능을 보임을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.232-239
• /
• 1992

In this paper, an analytical expression of the excess MSE of ITLMS(Individual Tap LMS) which results from the random fluctuation of the distance between the actual and optimal coefficients due to noisy gradient estimates, is derived. The expression reveals that the excess MSE of the ITLMS algorithm is smaller that that of the LMS algorithm. The performance of the algorithm from the computer simulation for a fading time-dispersive channel verifies the theoretical results.

• Journal of the Korean Data and Information Science Society
• /
• v.11 no.2
• /
• pp.279-293
• /
• 2000

This article suggests two change-point estimators which are modifications of Carlstein(1988) change-point estimators with rank functions and mean functions where there is one change-point in a mean function. A comparison study of Carlstein(1988) estimators and proposed estimators is done by simulation on the mean, the MSE, and the proportion of matching true change-point.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.721-723
• /
• 2014

본 논문은 선박내부의 센서데이터 이상감지를 위해 실시간 신뢰구간을 설정하고 신뢰구간을 초과하거나 미만이 되면 경보를 통해 관리자에게 알려주는 모니터링을 위한 신뢰구간 추정이다. 여기서, 이상 감지 예측의 정확도 향상을 위해 단순지수평활법과 이동평균법의 평균제곱오차를 비교 평가 하였다. 실험결과, 이동평균법의 평균제곱오차가 단순지수평활법 보다 적게 나와 선박 내부 모니터링을 위한 신뢰구간은 이동평균법을 적용하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.224-232
• /
• 2003

In this paper, efficient deployment method of sensors and target positioning performance with respect to measurement error are dealt with. Active sonar can be categorized into Monostatic, Bistatic, Multistatic sonar, and characteristics of respective sonar are different. Assuming that each sensor can receive range and angular information, we compare the performance of Monostatic, Bistatic, and Multistatic systems. And we suggest Weighted least square (WLS) which gives the weight to former case, LS. In particular. adopting suggested method we investigate the target positioning performance according to number of sensor, distance from transmitter to receiver, and propose efficient arrangement rule for Multistatic sonar configurations. According to the experimental results, RMSE of Multistatic sonar is found to be superior to Monostatic and Bistatic by 35.98%. 37.45% respectively, and WLS is superior to LS approximately by 7.4% in average. Furthermore, as the difference of respective sensor's variance is large, it is observed that the improvement ratio of target positioning performance is increased.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.89-100
• /
• 1994

In this paper we consider a new estimator of mean residual life (MRL), based on the partial moment of the distribution. The parameters of a partial moment are estimated by its maximum likelihood estimators when the underlying distribution is known. Though the new estimator is not a consistent estimator of the MRL, it is shown to have smaller mean squared error than the well known empirical MRL estimator for certain parametric families. Numerical summaries of the mean squared errors of the new estimator are presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.279-285
• /
• 2010

In the process of the probabilistic-based design on the coastal structures, the probability density function (pdf) of tidal elevation data is assumed as the normal distribution function. The pdf shape of tidal elevation data, however, is better-fitted to the double-peak normal distribution function and the equivalent mean and standard deviation (SD) estimation process based on the equivalent normal distribution is required. The equivalent mean and SD (equivalent parameters) are different with the mean and SD (normal parameters) estimated in the condition that the pdf of tidal elevation is normal distribution. In this study, the difference, i.e., estimation error, between equivalent parameters and normal parameters is compared and analysed. The difference is increased as the tidal elevation and its range are increased. The mean and SD differences in the condition of the tidal elevation is ${\pm}400cm$ are above 100 cm and about 80~100 cm, respectively, in Incheon station. Whereas, the mean and SD differences in the condition of the tidal elevation is ${\pm}60cm$ are very small values in the range of 2~4 cm, in Pohang station.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.257-268
• /
• 2015

The objective of this study is to assess the dual-polarization radar for flood forecasting. First, radar rainfall has temporal and spatial errors, so estimated radar rainfall was compared with ground observation rainfall to assess accuracy improvement, especially, considering the radar range of observation and increase of the rainfall intensity. The results of this study showed that the error for estimated dual-polarization radar rainfall was less than single-polarization radar rainfall. And in this study, dual-polarization radar rainfall for flood forecasting was assessed using MAP (Mean Areal Precipitation) and SURR (Sejong University Rainfall Runoff) model in Namkang dam watershed. The results of MAP are more accurate using dual-polarization radar. And the results of runoff using dual-polarization radar rainfall showed that peak flow error was reduced approximately 12~63%, runoff volumes error was reduced by approximately 30~42%, and also the root mean square error decreased compared to the result of runoff using single-polarization radar rainfall. The results revealed that dual-polarization radar will contribute to improving the accuracy of the flood forecasting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1298-1310
• /
• 2001

이 논문에서는 채널 상태가 천천히 변할 때, 직교 주파수 분할 다중화-부호분할 다중접속 시스템에 적합한 채널 추정 방법을 제안하고 성능을 분석한다. 제안한 채널 추정 방법은 시간과 주파수 영역 모두에 파일럿 심볼을 삽입하고, 이산 퓨리에 변환 후 영을 채워 넣는 방법을 이용한 내삽법으로 모든 부채널의 전달 함수를 얻는다. 또한 변환 영역에서 저대역 여파를 통해 받은 파일럿 신호에 존재하는 가산성 백색 정규 잡음의 영향을 상당히 줄일 수 있다. 이 때 저대역 여파기의 차단 주파수는 채널의 다중경로 수에 따라 정해진다. 같은 방법을 이용한 내삽법을 시간축으로 적용하여 시간에 따라 변하는 부채널의 채널 응답을 얻을 수 있다. 이 논문에서는 여러 가지 내삽법에 대한 평균 제곱 오차 성능을 수식적으로 제시한다. 제안한 저대역 여파를 결합한 내삽법을 쓰면 채널의 통계적 특성에 관한 정보 없이, 그리고 훨씬 적은 계산량으로 선형 최소 평균 제곱 오차 추정기와 비슷한 성능을 얻는다. 레일리 감쇄 채널에 대한 모의 실험을 통해 같은 비트 오류율에 대한 신호 대 잡음 비의 이득이 있음을 보인다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.132-140
• /
• 2019

In this study, a specimen composed of columns, walls, beams, and slabs was fabricated to investigate the estimated reliability using nondestructive test method for the location of structural members of reinforced concrete single layer structures. And for accurate analysis in the comparison process with the existing estimation formula, we try to analyze the reliability through statistical approach by using error rate comparison and Confidence interval estimation. As a result, The average error rate of the core test was 18.8% compared with the result of estimating the compressive strength using the ultrasonic pulse velocity method. The average error rate of the core test results compared with the result of estimating the compressive strength using the rebound hardness method was 20.1%, confirming the field applicability. it is judged that the reliability of the compressive strength estimation can be derived from the wall member to make a quick and efficient structure safety diagnosis using the ultrasonic pulse velocity method. In addition, it is judged that the reliability of the compressive strength estimation can be derived from the beam member to make a quick and efficient structure safety diagnosis using the rebound hardness method.