• Journal of Sensor Science and Technology
• /
• 제1권2호
• /
• pp.155-163
• /
• 1992

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three-dimensional adaptive tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track update illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver detector. A detailed simulation is conducted to test the validity of our tracking algorithm for encounter geometries under various conditions of maneuver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제28권2호
• /
• pp.129-138
• /
• 2017

This paper has been shown for the extraction of Doppler signature from the radar signal for an air-breathing targets tracked in the ground radar. For the extractions, a Doppler resolution is confirmed from mathematical modeling of PT(pulse train) waveform. Doppler signatures of air-breathing target are varied to radar aspect angle of engine and are determined from physical parameter of jet engine. To confirm such Doppler signatures, the radar signal reflected from the air-breathing target is obtained by our radar signal storage. After this extraction, radar aspect angle of engine has estimated from tracking information. Relative differences of Doppler signatures to radar aspect angle of engine is verified from these results and Doppler profiles for radar target identification appliance are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제28권4호
• /
• pp.269-278
• /
• 2017

We analyze the jamming/deception performance of an active decoy against ground tracking radars on dynamic combat scenarios. Based on the movement and the interference flow of an airborne platform, the trajectories of the active decoy is accurately calculated by solving 6-degree of freedom equations of motion. On realistic combat scenarios, numerical simulations are examined to analyze the jamming performance of the decoy for various movements of the platform and RF specifications of the active decoy. Effective jamming/deception area against the ground tracking radars is estimated from the simulation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• 제8권1호
• /
• pp.43-56
• /
• 1997

다중 표적 추적(MTT:Multiple Target Tracking)은 한 개 또는 그 이상의 센서들을 사용하는 감시(sureillance) 시스템을 위해서 컴퓨터와 마찬가지로 주변상황을 해석하는데 없어서는 안되는 중 요한 요소이다. 레이다, IR(Infrared) 및 Sonar등과 같은 전형적인 센서 시스템들은 여러 가지 신호원 (sources): 문제의 표적, 레이다 지면 클러터(clutter)같은 후면잡음 또는 열잡음같은 내부 오차 요인 으로부터 측정치(measurement)를 만들어 준다. 다중표적용 추적방식의 목적은 센서가 제공하는 측 정 데이터들을 동일한 신호원으로부터 나온 여러 세트의 관측치(observations) 또는 트랙(track)으로 구분해내는 것이다. 이와 같이 일단 트랙이 구성되고 확정되면 후면잡음이나 허위표적을 제거할 수 있 도록 표적의 수를 추산하고 표적의 속도나 예상위치 및 표적의 종류와 기타특성을 계산해낼 수 있다.

• Defense and Technology
• /
• 4호통권230호
• /
• pp.38-47
• /
• 1998

레이다는 저고도 표적에 대한 탐지능력 ECCM 능력, 대방사유도탄에 대한 대처능력이 우수해야 하며, 동시다발 표적에 대한 탐지와 추적능력을 보유해야 하고 다기능 및 다목적 용도를 위해서 또는 시시각각으로 변하는 상황에 대처하기 위해서는 시스템의 융통성과 잠재능력이 커야 한다.

• Journal of Advanced Navigation Technology
• /
• 제26권2호
• /
• pp.85-90
• /
• 2022

In this study, in order to test the performance of the aircraft system, a threat signal simulator that can transmit a signal similar to the actual threat to the aircraft under test with high power was designed. The high-power threat signal simulator should be able to transmit broadband (UHF band, L band, S band, X band) communication signals and radar signals, and control to transmit signals accurately directed to the aircraft through interfacing tracking radar. The signal strength of the developed equipment is 63 dBm to 93 dBm or more depending on type of signal, and the tracking precision is less than 0.1 degree, which satisfies the required performance. And it was confirmed that the antenna of the high-power threat signal simulator can accurately direct the signal to the aircraft position through the tracking radar interfacing.

• Journal of Convergence for Information Technology
• /
• 제10권5호
• /
• pp.30-35
• /
• 2020

In this paper, we analyzed the tracking error for the monopulse radar by controlling the phase difference, amplitude ratio and engagement angle of the cross-eye jammer. Cross-eye jamming is an important jamming method for monopulse radars, which causes a displacement in the radar receiving antenna input and misleads the radar's tracking angle. As a result of analyzing the tracking distance error of the radar while changing the engagement angle between the monopulse radar and jammer, the maximum distance error occurs when the engagement angle is 0° and the phase difference is 180°. It was confirmed that the error decreased to 70% or less of the maximum distance error into 45°~135°. In order to increase the efficiency of jammers, it is necessary to study rotary jammers or multi-channel jammers. This study will be very useful for the design of cross-eye jammers for aircraft and ships.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제22권4호
• /
• pp.119-125
• /
• 2022

The power supply for the anti-aircraft radar homing sensor should allow the system to receive power quickly and stably without the influence of noise. For this purpose, DC-DC converters are widely used for reliable power conversion. Also, switching of DC-DC converters Frequency noise should not cause false alarms and ghosts that may affect the detection and tracking performance of the system, and it should have a check function that can monitor power in real time while the homing sensor is operating. In order to apply to anti-aircraft radar homing sensor, we developed a multi-output switching power supply with maximum output 𐩒𐩒𐩒 W, efficiency 80% or more (@100% load), output power by receiving 28VDC input, and power supply to achieve more than 80% efficiency. A DC-DC converter was applied to this large output, and the multi-output flyback method was applied to the rest of the low-power output.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.577-580
• /
• 2017

중합 효소 연쇄 반응 (PCR) 젤 전기영동 이미지에서 DNA 지문을 분석하기 위한 새로운 레인 검출 및 추적 알고리즘이 제안하였다. 이전에 여러 연구 결과가 보고되었지만 갑작스런 배경 밝기 차이와 구부러진 레인이 있는 이미지에서 레인을 정확하게 추출하는 것은 여전히 어려움이 있다. 우리는 평균 레인 폭과 레인 주기를 계산하기 위한 에지 기반 알고리즘을 제안한다. 본 논문에서 제안한 방법은 k-means 클러스터링 알고리즘을 이용하여 상승 에지와 하강 에지를 정확하게 추출하는 부화소(sub-pixel) 알고리즘을 적용하여 레인 폭과 주기를 추정한다. 구부러진 레인을 처리하기 위해 젤 이미지를 정상영역과 비정상영역으로 분할하고, 각 분할 된 이미지의 레인 중심을 추적한다. 우리가 제안한 방법의 성능을 평가하기 위해 534 레인을 포함한 32 개의 젤 이미지가 사용되었다. 실험 결과는 우리의 방법이 전처리 과정 없이 배경 차이와 구부러진 레인을 갖는 이미지에 강인함을 보여 주었다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제20권4호
• /
• pp.35-41
• /
• 2020

The small tracking radar is a very important component of the wire harness design because the components are organically connected. In addition, the cable connected to the signal processing unit and the servo unit having a large number of digital signals should be prepared to prevent the CPU of the signal processing unit from malfunctioning due to electromagnetic noise. Cables for signal transmission in the ◯◯ GHz band must reflect the design of temperature, vibration, and shock. To design a wire harness in a small space, the size of the connector must be minimized. The issues to be considered are described and the design plan is presented.