• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.67-78
• /
• 2012

The current traffic regulations in Korea stipulate that traffic should keep to the right according to the Road Traffic Act; thus, customarily, the 'seat-on-the-left' system has been maintained. However, an increased number of 'seat-on-the-right' vehicles are being imported via a variety of routes from foreign countries, especially from Japan. According to the data from July 2004, 1,343 cargo vehicles and 593 passenger vehicles (for diplomats, etc.) were currently being driven on domestic road. As these 'seat-on-the-right' vehicles are not compatible with the domestic transportation system of driving on the right side of the road, there is a high risk of accidents. Experiments show that such system-driver mismatch causes longer operation time for directional signals, higher error frequency in yielding due to additional mental adjustments for 'seat-on-the-right' vehicle drivers. These are, therefore, influential factors which can lead to possible accidents. Furthermore, when the experiments test the visual range during overtaking maneuvers, the visual range of the drivers in the 'seat-on-the-left' vehicle was 2.95 meters as opposed to 1.7 meters for the drivers in the 'seat-on-the-right' vehicle. (In the experiment, the drivers were instructed to look at the paper cup 10 meters away from the back of drivers' seat.) The results demonstrate that it is necessary to have additional safety measures be implemented for the 'seat-on-the-right' vehicles.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.751-762
• /
• 1999

In this study, a 1-D laboratory experiment was conducted to investigate the characteristics of transient unsaturated solute transport by using two kinds of soils of which properties were known by test. Especially the TDR method which is proposed in this study was used to measure water content and solute concentration. As results, in the transient flow, the wetting front moves down rapidly, and the distribution of solute concentration near the wetting front showed the similar type of the water content distribution(semi-bell type). A numerical model HYDRUS was used to compare with the experimental results. Numerical results for the water movement are similar to experimental result. However, numerical results of the distribution of solute concentration are more scattered than experimental results. It means that measured dispersivity, numerical dispersion, adsorption coefficient, and soil sample size etc. should be considered in order to determine the dispersivity used in the numerical model. The present measuring method was proved to be superior to other formula and to be an available method to apply to solute transport test. The measuring error of the developed method is estimated smaller than 10% while water content is larger than 0.15.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.178-188
• /
• 2019

When using a distributed system, it is very important to know the intention of a target ship in order to prevent collisions. The action taken by a certain ship for collision avoidance and the action of the target ship it intends to avoid influence each other. However, it is difficult to establish a collision avoidance plan in consideration of multiple-ship situations for this reason. To solve this problem, a Distributed Stochastic Search Algorithm (DSSA) has been proposed. A DSSA searches for a course that can most reduce cost through repeated information exchange with target ships, and then indicates whether the current course should be maintained or a new course should be chosen according to probability and constraints. However, it has not been proven how the parameters used in DSSA affect collision avoidance actions. Therefore, in this paper, I have investigated the effect of the parameters and weight factors of DSSA. Experiments were conducted by combining parameters (time window, safe domain, detection range) and weight factors for encounters of two ships in head-on, crossing, and overtaking situations. A total of 24,000 experiments were conducted: 8,000 iterations for each situation. As a result, no collision occurred in any experiment conducted using DSSA. Costs have been shown to increase if a ship gives a large weight to its destination, i.e., takes selfish behavior. The more lasting the expected position of the target ship, the smaller the sailing distance and the number of message exchanges. The larger the detection range, the safer the interaction.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.291-299
• /
• 2021

In 2019, SUV sales surpassed sedans in the domestic sales market with phenomenal domestic sales. The strength of SUVs around the world is expected to continue in the future. South Korea's K-company aggressively launched small SUVs in the SUV market. Its simple lineup is recognized as a brand image, not as a SUV. It is time to evaluate this. Therefore, it influences the purchasing decisions of potential customers and buyers of small SUVs through the evaluation of design images of small SUVs in Korea. Rather than the functional properties of the SUV model, it is purchased by emotional characteristics, brand symbolism, and image. Subconsciousness of the purchasing psychology of the end consumer was used by metaphor extraction techniques. Customers wanted to study the evaluation of small SUV design images that fit their needs. We wanted to see if consumers who intend to purchase or purchase small SUVs in Korea had a connection with the image of design of small SUVs in Korea. The conclusion of the study was extracted through ZMET, a metaphor extraction technique, with the latent consciousness of the primary ambiguous message from the consumer's feeling and representation of the image. Therefore, based on the results of this study, we hope that the images presented in SUVs in the future will be used as a design guide in the development of small SUVs to influence customer thinking and behavior.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.152-166
• /
• 2022

This study analyzed the causal relationship among operating characteristics of commercial freight vehicles, dangerous driving behaviors, and traffic accident risk. The study applied the existing accident cause and prevention theory to arrive at this relationship. Data related to working characteristics of driver, driving experience, driving ability, driving psychology, vehicle characteristics (size), dangerous driving behavior, and traffic accidents were collected from 303 commercial freight vehicle drivers. Working characteristics and dangerous driving behavior data are based on the driver's digital driving record. The traffic accident data is based on the insurance accident data reflecting actual traffic accidents. First, a structural equation model was built and verified using the model fitness index. Then, the developed model was used to analyze the causal relationship between multiple independent and dependent variables simultaneously. Four dangerous driving behaviors (sudden deceleration, sudden acceleration, sudden passing, and sudden stop) were found to be highly related to traffic accidents. The results further indicate that it is necessary to establish a safety management policy and intensive management for small-sized freight vehicles, drivers with insufficient driving ability, and drivers with dangerous driving behaviors. Such policy and management are expected to reduce traffic accidents effectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.453-459
• /
• 2006

This paper presents an experimental evaluation of wandering effect on asphalt concrete pavement responses. A laser-based wandering system has been developed and its performance is verified under various field conditions. The portable wandering system composed of two laser sensors with Position Sensitive Devices can allow one to measure the distance between laser sensors and tire edges of moving vehicle. Therefore, lateral position of each wheel on the pavement can be determined in a real time manner. Pavement responses due to different loading paths are investigated using a roll over test which is carried out on one of asphalt surfaced pavements in the Korea Highway Corporation test road. The pavement section (A5) consists of 5 cm thick surface course; 7 cm intermediate course; and 18 mm base course, and is heavily instrumented with strain gauges, vertical soil pressure cells and thermo-couples. From the center of wheel paths, seven equally-spaced lateral loading paths are carefully selected over an 140 cm wandering zone. Test results show that lateral horizontal strains in both surface and intermediate courses are mostly compressive right under the loading path and tensile strains start to develop as the loading offset becomes 40 cm from the wheel path. The development of the vertical stresses in the top layers of subbase and anti-frost is found to be minimal once the loading offset becomes 50 cm.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.79-109
• /
• 2011

In his highly cited book, Innovator's Dilemma (1997), Christensen introduced a notion of disruptive technology that is based on the observations from disk-drive industry and used it as an explanatory variable through which new entrants outperform incumbents in the industry. In explaining his later observations of disruptive innovations in other industries, however, his early theory based on disruptive technology has been applied to all cases without careful distinction between the notions of technology and business model (Markides, 2006). Furthermore, it has been criticized that his model suffers from lack of enough explanatory power and other important factors that are necessary to fully explain the observed phenomena in various cases (Danneels, 2004). Motivated by the critics in literature, the current study carefully distinguishes between innovation of technology and innovation of business model in the process of disruptive innovation, and apply our framework to the case of internet shopping mall business. Our study yields two main results. First, the internet-related business model which Christensen argued as an example of disruptive innovation is accomplished through two distinctive and separable growth phases: a period of technology growth and a period of business model growth. Second, in the process of disruptive innovation, the notion of enabling technology plays an important bridging role that connects core technology and business model. Furthermore, we confirm that the success of business model innovation depends on the degree of maturity of the enabling technologies. In conclusion, Christensen's notion of disruptive innovation can be further detailed in terms of technology innovation and business model innovation, and if there exist enabling technologies, the chance of success of the business model is higher when the enabling technology is matured rather than when the core technology is merely acknowledged as a disruptive technology.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.4
• /
• pp.363-371
• /
• 1996

The Steering and Sailing Rules of International Regulations for Preventing Collisions at Sea now in use direct the best aid - action to avoid collision by the stand - on vessel. But these rules do not refer to the safety relative distance between two vessels when she should take such action. In this paper, the author analyzed the ship's collision avoiding actions from the viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for taking action to avoid collision. Figuring out the values of maneuvering indices through experiments of 11 actual ships of small, medium, large and mammoth size, the author applied these values to the calculating formulas and calculated the minimum relative distances. The main results are as follows: 1. It was confIrmed that the stand - on vessel should keep the greatest relative distance for taking best aid - action to avoid collision when the cross angle of course was $90^{\circ}$ and near it(70-$90^{\circ}$ ). 2. When the cross angle of course was $90^{\circ}$ , the minimum relative distance of small vessel(GT: 160-650tons) was found to be more than about 6.8 times of her own length, and those of medium(GT : 2,300-3,500tons), large(GT : 22,OOO-62,OOOtons) and mammoth(GT : 91,000-139,000tons) vessels were found to be more than about 9.0 times, about 5.4 times and about 6.8 times of their own lengths. 3. It was confIrmed that collision danger was greater when crossing angle was obtuse than in an acute angle, therefore greater relative distance was to be kept by the stand - on vessel for taking best aid - action to avoid collision in the case of the obtuse angle. 4. In every vessels, in the case of $90^{\circ}$ cross angle of course the safety minimum relative distance was found to be more than about 9.0 times of their own lengths.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.59-70
• /
• 2013

This study was to suggest cultural landscape preservation, value creation, as well as utilization plan to help landscape development of Hahoe village by identify the existence of Okyeonsipyeong(玉淵十詠) natural features, which were set around Buyongdae(芙蓉臺) in Hahoe Village by Seoae(西崖) Ryu, Seongryong(柳成龍), and understanding their characteristics and meanings of natural features and meanings. Based on the writings of "Okyeonseodanggi" and "Okyeonsipyeong", the major results of this study are as belows. 'Okyeon(玉淵)' letters carved on the rocks, also known as the name of pavilion in Okyeonjeongsa(玉淵精舍), is the center of Okyeonsipyeong that symbolizes the enlightenment of clean noble man, as well as the symbolic locational expression of studying room. One of Okyeonsipyeong, 'Wansimjae', is assumed to be the name from the combination of two Buddhist names, 'Wanjeok(玩寂)' and 'Seshim(洗心)', 'Dangho(堂號)', lined on both sides with Wonlakjae, the residence of Seoae, as the center. Wansimjae is after all the natural feature indicating the overall Okyeonjeongsa as the core of Okyeonsipyeong with west edge Gyeomamjeongsa(謙巖精舍). Among ten Okyeonsipyeong natural features, Wansimjae(玩心齋), Ganjukmun(看竹門), Gyeomamsa(謙菴舍), Dalgwandae(達觀臺), Ssangsongae(雙松厓), and Dohwacheon (桃花遷) are on the right side of the stairway from Okyeonjeongsa to Gyeomamjeongsa, while Chuwoldam(秋月潭), Neungpadae(凌波臺), Gyeseonam(繫船巖), and Jijuam(砥柱巖) are on the road to the cliff under river cliff in Buyongdae as well as to the dock, and all are located within 500m radius close and diameter area. As the results of lexeme and context analyses of Okyeonsipyeong poet, they are mainly about Confucian teachings symbolizing the constancy of the classical scholar including ego becoming one with the nature and back to the nature, unworldliness and farsighted view, transcendence and seclusion, as well as integrity spirit. In Dohwacheon and Gyeomamsa poets, there is Tao characteristics and brotherhood that pursue fairylands such as Mooreungdowon(武陵桃源). To create tourism brand and landscape of Okyeonsipyeong, it is necessary to prepare storytelling plans including the letters carved on the rocks introduction in Buyongdae area, and also synopsis of the Silgyeongsusang musical, 'Buyongjiae(芙蓉之愛)' that is related to 10 natural features. In addition, the related plans of the experience road from Gyeseonam, which is the boat stop in Buyongdae, to Ganjukmun of Okyeonjeongsa, and again to viewing routes on the stairways to Gyeomamjeongsa using boats are necessary. For preliminary preservation and maintenance plans, the safety of the stairway from Okyeonjeongsa to Gyeomamjeongsa should be secured, the rock inscription should be preserved, landscape interpretation plates should be installed, trees and shrubs around Dohwacheon rock inscription should be removed, Dalgwandae letters carved on the rocks should be restored, and the bamboo forest outside Ganjukmun as well as Prunus persica plantation around Dohwacheon should be pointed out.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.3
• /
• pp.132-141
• /
• 2012

Climate change impact assessment of cereal crop production in South Korea was performed using land attributes and daily weather data at a farm scale as inputs to crop models. Farmlands in South Korea were grouped into 68 crop-simulation zone units (CZU) based on major mountains and rivers as well as existing land use information. Daily weather data at a 1-km grid spacing under the A1B- and RCP8.5 scenarios were generated stochastically to obtain decadal mean of daily data. These data were registered to the farmland grid cells and spatially averaged to represent climate conditions in each CZU. Monthly climate data for each decade in 2001~2100 were transformed to 30 sets of daily weather data for each CZU by using a stochastic weather generator. Soil data and crop management information for 68 CZU were used as inputs to the CERES-rice, CERE-barley and CROPGRO-soybean models calibrated to represent the genetic features of major domestic cultivars in South Korea. Results from the models suggested that the heading or flowering of rice, winter barley and soybean could be accelerated in the future. The grain-fill period of winter barley could be extended, resulting in much higher yield of winter barley in most CZUs than that of rice. Among the three major cereal grain crops in Korea, rice seems most vulnerable to negative impact of climate change, while little impact of climate change is expected on soybeans. Because a positive effect of climate change is projected for winter barley, policy in agricultural production should pay more attention to facilitate winter barley production as an adaptation strategy for the national food security.