• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.76-81
• /
• 2003

To investigate the convective heat transfer phenomena inside the Lox/Kerosene liquid rocket combustion chamber, hot fire tests were performed by using a water-cooled calorimetric chamber. The calorimetric chamber consists of one cylindrical section and nozzle section with independent cooling passage. To measure the heat flux, thermocouples were installed inlet and outlet of cooling passage of each section. The investigated range of combustion chamber pressure is from 100 psi to 300psi at fixed O/F ratio of 2.0 and radiation heat transfer from the hot gas to the surface is not considered. The measured heat flux was almost linearly depended on the chamber pressure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.237-243
• /
• 2010

In this study, the effect of the shape of a pintle(obstacle) on thrust-modulation performance and drag in a pintle rocket was investigated by a cold flow test and by computational fluid dynamics. Pintle movement caused a monotonic increase in the chamber pressure. Thrust generated by the pressure distribution on the pintle body was linearly changed to the chamber pressure, and this thrust was greater than that generated by the nozzle-wall pressure distribution. Because the shock pattern in the nozzle changes with the shape of the pintle body and pressure ratio, the thrust generated by the nozzle-wall pressure is not directly affected by chamber pressure. The drag due to the pintle(obstacle) can be minimized for a fully linear pintle shape, regardless of chamber pressure.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.97-97
• /
• 2004

현재 KSLV-I에서 탑재부의 Pitch, Yaw, Roll의 3축 제어 및 2단부의 Roll 제어를 위해 사용되는 보조 추진 시스템은 구성이 단순하며, 신뢰성이 높은 것으로 알려져 있는 단일 추진제인 하이드라진을 이용하는 추진 시스템을 고려하고 있다. 이러한 하이드라진 추진 시스템은 추력실 전방에 설치되어 있는 추력기 밸브의 ON/OFF를 이용하여 추력을 조절하게 되는데, 이 때 추력기 밸브의 빠른 작동으로 인해 수격현상에 의한 급격한 압력 상승이 발생하게 되어 구조물의 손상을 발생하게 된다. (중략)

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.51-56
• /
• 2002

Satellite propulsion system is employed for orbit transfer, orbit correction, and attitude control. The monopropellant feeding system in the low-earth-orbit satellite blowdowns fuel to the thrust chamber. The thrust produced by the thruster depends on fuel amount flowed into the combustion chamber. If the thruster valve be given on-off signal from on-board commander in the satellite, valve will be opened or closed. When the thrusters fire fuel flows through opened thruster valve, instantaneous stoppage of flow in according to valve actuation produces transient pressure due to pressure wave. This paper describes transient pressure predictions of the KOMPSAT-2 propulsion system resulting from latching valve and thrust control valve operations. The time-dependent set of the fluid mass and momentum equations are calculated by MOC.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.28-39
• /
• 2018

In this study, numerical simulations were performed for steady and unsteady state characteristics of length effects on linear pintle nozzles using the overset grid method. Nozzles and pintles are created separately by an auto grid generation program to use the overset grid method. Appropriate turbulent models and numerical methods are selected for the validation of simulations. Pintle shapes are chosen from five types, with differences in the ratio of length and diameter. The longer the pintle length, the greater the thrust and thrust coefficient. The chamber pressure tendency of steady-state and unsteady-state are different for various pintle velocities. The thrust of the nozzle exit responds to changes in the nozzle throat in the unsteady-state, and the speed of pressure propagation wave generated by movement of the pintle is considered to predict the major factor of performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.6
• /
• pp.19-26
• /
• 2014

A ground hot-firing test (HFT) was carried out to make a close examination into the pressure instability for the 70 N-class hydrazine thruster under development. Monopropellant grade hydrazine was adopted as a propellant for the HFT, and catalyst-bed was filled with $Ir/Al_2O_3$ catalyst. In order to investigate the effects of thrust-chamber diameter on combustion stability, evaluation tests for the development models were performed on three kinds of lower thrust chambers having the length-to-diameter ratio (L/D) of 1.03, 1.13, and 1.26. As results, it was found that low frequency instability (~ 50 Hz) was inherent in the models, and in addition, increase of the L/D and decrease of the operating pressure led to an amplification of pressure oscillation in the test condition specified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.6-6
• /
• 1999

액체 로켓 엔진은 추진기관 공급 시스템으로 작동이 된다. 추진기관 공급 시스템에는 유공압장치 및 각종 배관, 필요한 압력과 유량을 연소실과 가스발생기로 공급하는 시스템, 엔진의 점화 및 정지, 발사체의 사용 목적에 따라 부과되는 기능을 수행하기 위한 장비들이 포함된다. 공급시스템은 크게 가압가스를 이용하는 방법과 터보펌프를 이용하는 방법의 두 가지로 나눌 수 있다. 잘 알려진 바와 같이 일반적으로 추력이 큰 로켓엔진의 경우에는 터보 펌프식이, 추력이 크지 않은 경우에는 가압가스 방식이 이용된다. 일반적으로 가압가스 방식은 연소실 압력이 커질수록 추진제 탱크의 압력도 커지므로, 그 두께가 두꺼워져서 비효율적이 된다. 따라서 연소실 압력이 비교적 크지 않은 추력이 약 10t 내외에서 많이 사용되고, 시스템이 터보 펌프식보다 구조가 매우 간단하므로, 작동의 신뢰도는 매우 높다.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.8-13
• /
• 2010

An effective control of the axial thrust of a turbopump is one of the critical issues for obtaining its operational stability. Axial thrusts of the fuel pump for the 75-ton class rocket engine under development were measured with water as a test propellant at a room temperature. According to the test results, the axial thrust of the fuel pump seemed to satisfy the axial force condition of its bearing. Also, the thrust was increased as a whole when the flowrate of the pump was decreased. Furthermore it was found that the thrust and the leakage flowate were modified when the gaps between the floating ring seals and the impeller were changed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.135-138
• /
• 2011

As a basic research for the development of Korean lunar lander, propulsion system development for ground test is in progress. Thrust for descent is 200 N class. Design target is 220 N in vacuum thrust at 100 g/s flow rate, 200 psi chamber pressure. For ground test, thrust measurement system using LM guide was developed and test was performed. The result shows 160 N thrust in atmosphere condition at 210 psi chamber pressure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.125-129
• /
• 2009

The basic design of liquid rocket engine combustion chamber for a large space launch vehicle was described. It has vacuum thrust of 74.8 ton, vacuum specific impulse of 306.9 sec, chamber pressure of 60 bar, mass flow rate of 243.6 kg/s and combustion characteristic velocity of 1730 m/sec. The details of combustion performance and geometrical parameter were also given. The 75 ton combustion chamber consists of the combustor head with injector and the chamber/nozzle with regenerative cooling channels.