• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.363-367
• /
• 2005

Latching valves are operated like solenoid valves by open/close command and they maintain final open or close commend without electric power source, so they are widely used in propulsion system of satellite and launch vehicle requiring reliability and being subject of restriction of power. This paper present design and test procedure of latching valve using permanent magnet polarized solenoid, which is developed for 45N Hydrazine propulsion system, to estimate feasibility of design and manufacture of latching valve.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.802-808
• /
• 2014

MEMS based solid propellant thruster researched for the purpose of an academic research will be verified at space environment through CubeSat program. For this, the temperature of the MEMS thruster should be within allowable operating temperature range by proper thermal control to prevent the ignition failure caused by ignition time delay and to guarantee the structural safety of the MEMS thruster in the low temperature. In this study, we proposed an effective thermal control strategy, that is to use micro-igniter as a heater and temperature sensor for active thermal control instead of using additional heater. The effectiveness of the strategy has been verified through on-orbit thermal analysis of CubeSats with MEMS thruster.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.117-120
• /
• 2011

The parameters which can affect the performance of small thruster were verified by experiments. The loss of catalyst through the port for pressure sensor was prevented by chamber wall mesh. There was no performance decrease due to chamber wall mesh, and stable supply of propellant is the key of stability of the thruster. However, sudden pressure drop in the chamber can decrease the performance instantly. Therefore, the sudden pressure drop should be eliminated as much as possible. The cross type distributor showed more stable performance than circular type, and structural strength is also stronger.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2021

To develop technologies for the stable operation of electric propulsion systems, the exhaust plume behavior of electric thrusters was studied using PIC-DSMC(particle-in-cell and direct simulation Monte Carlo). For the numerical analysis, the Simple Electron Fluid Model using Boltzmann relation was employed, and the charge and momentum exchanges due to atom-ion collisions were considered. The results of this study agreed with the plasma potentials measured experimentally. Near the thruster exit, active collisions among particles and charge exchanges created slow ions and fast atoms, which were expected to significantly affect the trajectory and velocity of the thruster exhaust plume.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.377-386
• /
• 2015

DubaiSat-2 is the first satellite developed in Korea equipped with a hall-effect thruster. In this paper, the performance of the DubaiSat-2 hall-effect thruster is verified by analyzing the orbit information of DubaiSat-2. The preparation and performance of orbit operations during 8 months after launch (2013.11.21., UTC) is emphasized and the effects of solar activity on orbit evolution is analyzed. In particular, the hall-effect thruster's thrust is estimated by analyzing difference between observed orbit evolution and predicted orbit. As a result, the estimated thrust is similar to the ground experiment result of 11 mN. The summarized result in this paper would be important reference to improve the stability and effectiveness of satellite operation during the early operation and normal mission lifetime in case of low Earth orbit satellites.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.189-192
• /
• 2011

In solid rockets, a pintle thruster is a modulatable thrust device which controlls nozzle throat area. In this study, effect of bore on aerodynamic loads in a SNECMA modulatable thruster was carried out. Existence of bore resulted in reduced aerodynamic load.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.406-408
• /
• 2017

Ammonium dinitramide (ADN) Low toxicity monopropellant based 1N class thruster and test equipment were developed. Compared with the hydrazine which used in existing satellite thruster, ADN is easy to handle and has excellent physical characteristics such as density and specific impulse. Due to these characteristics, ADN is attracting attention as an eco-friendly propellant. In this paper, 1N class thruster and thrust measurement system was designed for performance testing of ADN monopropellant. The composition of the propellant for the design and experiment was set at 11.2: 25.4: 63.4 for each of Methanol: $H_2O$: ADN.

• Journal of the Korean Vacuum Society
• /
• v.19 no.2
• /
• pp.121-127
• /
• 2010

Neutral gas in a Hall-effect thruster in a small satellite is simulated using a molecular dynamics code. Investigated are neutral density, pressure, axial average velocity, and temperature for the variation of diffusive reflection ratio, initial gas temperature, and channel length. Expected through this research are improving of discharge simulation through the neutral simulation and understanding of real system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.109-112
• /
• 2008

A performance of micro thruster was measured with catalyst bed that was prepared by different catalyst loading condition for the optimization of catalyst bed size. Among the catalyst loading conditions, pH level of precursor solution was changed by several solutions like Nitric acid or Sodium hydroxide. For the each case, it was heated at different drying temperatures that can affect the phase of catalyst loaded on support. From these results, it was studied that the effect of catalyst loading condition on the performance. 90wt% hydrogen peroxide was used as a monopropellant, and platinum was chosen as a catalyst. Characteristic velocity efficiency and temperature efficiency were used for the performance evaluation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.144-149
• /
• 2014

A ground firing test for hot-fire performance evaluation according to the characteristic length($L^*$) variation of thrust chamber was carried out for the hydrazine thruster which may be employed in space launch vehicles. A scrutiny into the performance characteristics of each thruster is made in terms of thrust, specific impulse, response characteristics, and characteristic velocity at steady-state firing mode with propellant inlet pressure of 2.41 MPa (350 psia). Through the test results, it has been verified that performance of characteristic velocity and specific impulse degrades as the characteristic length deviates from that of the standard model. Thus, it is confirmed that the thrust chamber configuration of standard model was suitably designed for the requirement specified.