• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.3-15
• /
• 1986

This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.154-160
• /
• 1995

Dyeing behavior of Silk/Cationic dyeable polyester(CDP) mixed filament was investigated by using a cationic dye. The effect of pH, temperature and additives such as carrier, levelling agent and salt were examined for each silk and CDP component of mixed filament in order to find out the optimum dyeing condition. Based on these results, the dyeing behavior was investigated for Silk/CDP mixed filaments concering various dyeing parameters. The dye adsorption was significantly changed on the dyeing temperature, carrier addition and pH of the dyebath. Specially, the dye migration phynomena were observed for a mixed filament, showing that the dyes initially observed on the surface of silk fiber migrate to the CDP component during a dyeing process. The dyeing of Silk/CDP mixed filaments accompanied by dye migration and as a result, dye adsorption can be developed only for a CDP component. Therefore, the control of dyeing temperature is most important for a Silk/CDP mixed filament, in order that both silk and CDP component are able to be dyed by a cationic dye simultaneously in one bath/one dye system.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.154-154
• /
• 2011

최근 세계 각지에서 발생하는 대규모 터널 화재사고는 많은 사상자를 동반하고 이에 따른 경제적, 사회적 손실 또한 방대하게 진행되는 실정이다. 터널 구조물의 화재 특성상 외부에 쉽게 노출되지 않기 때문에 화재 발생 시 화재에 노출된 표층이 박리되거나 비산해서 단면결손이 생기는 폭렬 현상(explosive spalling)이 발생하게 된다. 이러한 폭렬 현상은 붕괴와 같은 대형 참사로 이어질 가능성이 크다. 따라서 본 연구에서는 터널 내 화재 발생 시 콘크리트 구조물의 폭렬에 의한 붕괴를 예방하기 위하여 이액형 상온경화 실리콘 고무와 인체에 무해한 친환경 첨가제인 펄라이트를 일정한 혼합비(5wt%, 10wt%, 15wt%, 20wt%)로 혼합하여 고성능 난연 복합체를 제조하고, 열적 특성과 난연 특성을 연구를 진행하였다. 열적 특성에 관한 시험으로 TGA를 측정하였으며, 난연 특성에 관한 시험으로는 화염 시험, 내화로 시험, 탄화로 시험을 진행하였다. 우선 TGA 시험은 $20^{\circ}C/min$ 승온 속도로 $800^{\circ}C$까지 실험을 하였고, 화염 시험은 제작한 시편과 gas torch($1200^{\circ}C$)의 화염 거리를 약 10cm로 하여 약 1시간 동안 시험을 하였다. 내화로 시험은 내화로 장치를 이용하여 RABT curve(5분만에 $1200^{\circ}C$도달 후 한 시간 동안 유지 후 냉각, 총 시험 시간 180분) 조건을 만족하는 환경에서 제작한 시편을 콘크리트에 부착하여 콘크리트의 내부온도를 측정하였다. 탄화로 시험은 탄화로 장치를 이용하여 $2^{\circ}C/min$ 승온속도로 $900^{\circ}C$까지 실험을 하여 외부 형태 변화를 관찰하였다. 각각의 시험 결과 TGA 열분해 결과 순수한 실리콘 고무보다 난연제인 펄라이트를 첨가했을 때 더 높은 온도에서 초기 분해 거동을 보였으며, 최종 잔류량은 80%를 보였고, 5 wt%의 펄라이트가 혼합된 시편의 최종 잔류량이 높은 것으로 보아 열분해에 가장 강한 조성임을 알 수 있었다. 화염 시험 결과 펄라이트가 혼합된 모든 시편에서 $300^{\circ}C$가 넘지 않은 결과를 보였다. 이는 제조된 복합체가 화염에 직접적으로 장시간 노출이 되어도 안전하다는 것을 알 수 있다. 내화로 및 탄화로 시험 결과 펄라이트가 15wt%와 20wt%가 첨가된 시편들보다 5wt%와 10wt% 첨가된 시편들이 고온에서 안정하다는 것을 보였다.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.244-248
• /
• 2007

The treatment of a model wastewater containing high concentration, 10 $g/{\ell}$, of phenol in an integrated wet oxidation-aerobic biological treatment was investigated. Partial wet oxidation under mild operating conditions was capable of converting the original phenol to biodegradable organic acids such as maleic acid, formic acid and acetic acid, the solution of which was subjected to the subsequent aerobic biological treatment. The wet oxidation was carried out at 150$^{\circ}C$ and 200$^{\circ}C$ and the initial pH of 1 to 12. The high temperature of 200$^{\circ}C$ and the acidic initial condition in the wet oxidation led to effluents of which biodegradability was higher in the subsequent biological oxidation process, as assessed by chemical oxygen demand (COD) removal. Homogeneous catalyst of $CuSO_4$ was also used for increasing the oxidation rate in the wet oxidation at 150$^{\circ}C$ and initial pH of 3.0. However, the pretreatment with the catalytic wet oxidation resulted in effluents which were less biodegradable in the aerobic biological process compared to those out of the non-catalytic wet oxidation at the same operating conditions.

• Convergence Security Journal
• /
• v.20 no.1
• /
• pp.3-8
• /
• 2020

Blockchain can enhance data transparency and security through decentralized data management that is out of the centralized system. permissioned blockchain of the blockchain platform, only trust-based authorized nodes can participate in the distributed network. Considering the characteristics of the permissioned blockchain, it is necessary to consider the network communication speed, transaction finality agreement, and stability as a condition for selecting the consensus algorithm. The consensus algorithms of the permissioned blockchain environment are diverse such as PoA, PBFT, Raft, etc., but there are no various evaluation factors for selecting consensus algorithms. In this paper, various performance evaluation factors are proposed to analyze the characteristics of each consensus algorithm of the permissioned blockchain and to select an efficient consensus algorithm considering the characteristics of the user environment that composes the network. The proposed performance evaluation factor can consider the network speed, stability, and consensus of the finality agreement between nodes under the premise of trust. Through this, a more efficient blockchain network environment can be constructed.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.519-524
• /
• 2002

In this paper we study the qualify of sequential coverage analysis under a scenario of distributed stochastic simulation known as MRIP(Multiple Replications In Parallel) in terms of the confidence intervals of coverage and the speedup. The estimator based in the F-distribution was applied to the sequential coverage analysis of steady-state means. in simulations of the $M/M/1/{\infty},\;M/D/I/{\infty}\;and\;M/H_{2}/1/{\infty}$ queueing systems on a single processor and multiple processors. By using multiple processors under the MRIP scenario, the time for collecting many replications needed in sequential coverage analysis is reduced. One can also easily collect more replications by executing it in distributed computers or clusters linked by a local area network.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.202-208
• /
• 2001

Under the constant daylength of 13 hours and growth temperatures of 15$^{\circ}C$ to 27$^{\circ}C$, the final number of loaves (FNL) on the main culm was constant as 15 regardless of temperature in rice variety 'Kwanganbyeo'. Leaf appearance rate (LAR) increased with rising temperature and decreased with phenological development. Threshold temperature (T$_{o}$) was not constant across growth stages, but increased with phenological development. Effective accumulated temperature (EAT), which is calculated by the summation of values subtracting T0 from daily mean temperature, is closely related with number of leaves appeared (LA). LA was fitted to bilinear, quadratic, power and logistic function of EAT. Among the functions, logistic function had the best fitness of which coefficient of determination was $R^2$=0.995. Therefore, LAR prediction model was established by differentiating this function in terms of time: (equation omitted). where dL/dt is LAR, T$_1$ is daily mean temperature, L is the number of leaves appeared, and a, b, and c are constants that were estimated as 41.8, 1098.38, and -0.9273, respectively. When predictions of LA were made by LAR prediction model using data independent of model establishment, the observed and predicted LA showed good agreement of $R^2$$\geq$0.99.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.220-229
• /
• 2009

Strain improvement and morphology investigation in bioreactor cultures were undertaken in suspended cultures of Phellinus linteus mycelia for mass production of protein-bound polysaccharides(soluble ${\beta}$-D-glucan), a powerful immuno-stimulating agent. Phellineus sp. screened for this research was identified as Phellinus linteues through ITS rDNA sequencing method and blast search, demonstrating 99.7% similarity to other Phellinus linteus strains. Intensive strain improvement program was carried out by obtaining large amounts of protoplasts for the isolation of single cell colonies. Rapid and large screening of high-yielding producers was possible because large numbers of protoplasts ($1{\times}10^5{\sim}10^6\;protoplasts/ml$) formed using the banding filtration method with the cell wall-disrupting enzymes could be regenerated in relatively high regeneration frequency($10^{-2}{\sim}10^{-3}$) in the newly developed regeneration medium. It was demonstrated that the strains showing high performances in the protoplast regeneration and solid growth medium were able to produce 5.8~6.4%(w/w) of ${\beta}$-D-glucan and 13~15 g/L of biomass in stable manners in suspended shake-flask cultures of P. linteus mycelia. In addition, cell mass increase was observed to be the most important in order to enhance ${\beta}$-D-glucan productivity during the course of strain improvement program, since the amount of ${\beta}$-D-glucan extracted from the cell wall of P. linteus mycelia was almost constant on the unit biomass basis. Therefore we fully investigated the fungal cell morphology, generally known as one of the key factors affecting cell growth extent in the bioreactor cultures of mycelial fungal cells. It was found that, in order to obtain as high cell mass as possible in the final production bioreactor cultures, the producing cells should be proliferated in condensed filamentous forms in the growth cultures, and optimum amounts of these filamentous cells should be transferred as active inoculums to the production bioreactor. In this case, ideal morphologies consisting of compacted pellets less than 0.5mm in diameter were successfully induced in the production cultures, resulting in shorter period of lag phase, 1.5 fold higher specific cell growth rate and 3.3 fold increase in the final biomass production as compared to the parallel bioreactor cultures of different morphological forms. It was concluded that not only the high-yielding but also the good morphological characteristics led to the significantly higher biomass production and ${\beta}$-D-glucan productivity in the final production cultures.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.185-192
• /
• 2010

Design of velocity-compounded turbine for 75ton class LRE turbopump application and pressure compounded turbine for 30ton class LRE turbopump has been performed. 1D calculation and CFD analysis were conducted in determining blade and flow passage shape of velocity compounded turbine iteratively. Finally, 23.1% improved specific power and 5% reduced weight turbine to the original design was developed. In case of pressure-compounded supersonic turbine design, rotational speed was increased by 50% and the effect of carryover ratio, 2nd nozzle installation angle, leakage flow of 2nd nozzle, and work sharing factor was studied. Final 1D design resulted 36% increased specific power and 51% reduced weight comparing to the original single-row impulse turbine. It is anticipated that nozzle flow path design will be very important for the accomplishment of expected performance of pressure-compounded turbine and nozzle shape optimization will be conducted through the CFD analysis.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.457-464
• /
• 2008

Dynamic fracture mechanism of rock is important to improve rapid excavation method and develop precise damage assesment of rock mass in the vicinity of an excavation. In order to investigate dynamic fracture characteristics and dynamic damage mechanism of brittle materials, this study employed pulse shape-controlled Split Hopkinson Pressure Bar (SHPB) system. The P- and S-wave velocities of the tested samples were measured before and after tests to examine damage of the samples. The decay ratios of the Ultrasonic wave velocities increased with impart velocities and the samples which have lower strength showed higher permanent strain significantly.