• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.217-236
• /
• 2006

In this study, the LCM was applied as the preliminary study for the cutterhead design of TBM and the drilling performance evaluation. The optimum cutting condition is obtained from the LCM tests and the effects of the design factors of IBM cutterhead, such as penetration depth and cutter spacing, on drilling performance are estimated. In this study, hence, to predict the accurate performance of TBM, instead of one-dimensional penetration depth applied in existing studies, three-dimensional cutting volume was quantified and measured. For this, the digital photogrammetry technique was applied to the LCM tests. Also, AUTODYN 2D was applied to investigate the applicability of the numerical analysis technique to simulate the cutting process of rock by the TBM disc cutter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.438-442
• /
• 1994

절삭가공에서 공구의 마멸은 생산의 최적화에 영향을 주는 가장 중요한 요소중의 하나라고할 수 있다. 따라서 생산시스템이 자동화되고 유연성 및 생산성이 증대되면서, 공구의 수명이 끝났을 때의 공구교환을 위한 최적 의사 결정전략(Decision making stratagy)은 그 중요성이 점차 커지고 있다. 한편, 공구는 마멸의 진행에 따라 그 수명을 예측하여 교환해 주는 것이 바람직하다. 그러나 공구의 마멸은 여러가지 요인들의 복합적 작용에의해 발생하는 현상 이므로 그것을 정확히 예측한다는 것은 많은 어려움이 있다. 본 연구에서는 절삭력을 이용하여 공구의 여유면마멸 (Flank wear)과 경사면마멸을 감지하고자 한다 먼저 절삭력을 정적인 성분(Static component)과 동적인 성분(Dynamic component)로 구분하여 공구의 마멸을 감지하는데 이용하였다. 절삭력의 정적인 성분은 절삭조건의 변화에 대해 정규 화된(Normalized) 절삭력으로 모델링하여 공구의 여유면 마멸을 감지 하였다. 또한 공구의 경사면마멸이 발생한 경우에는 절삭력의 동적인 성분이 크게 변화함을 알 수 있었다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.112-118
• /
• 1999

Aluminum alloy, which is advantageous to machining and injection, makes a great contribution to shortening in delivery time, infection cycle time and reducing expense. This study presents machining conditions for mild materials and describes the difference between theoretical and practical machined surface roughnesses affected by various machining conditions. Machining results have been evaluated and analyzed under varying machining conditions. Special properties of the mild materials have been presented by the quantitative analysis and the optimal machining condition has been proposed for the mild materials.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.113-119
• /
• 1996

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.573-584
• /
• 2014

In this study, the variations of cutter acting forces depending on cutting conditions were examined to obtain basic data for roadheader cutting head design. The linear cutting tests were performed in the condition of different attack angles, penetration depths, cutter spacings by using a slim conical pick for the light cutting condition. Cutter acting forces were measured by 3-directional load cell under different test conditions, and the analysis for cutting performance were carried out after calculating average values of the measured results. It is confirmed that the optimal cutting condition for the mortar specimen is the 50 degree attack angle, the cutter spacing of 12 mm, the cutting depth of 9 mm which are obtained from the analysis results. In addition, 50 degree attack angle is more effective than 45 degree attack angle to design optimal specifications of cutting head.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.602-607
• /
• 2002

금형가공에서 사용되는 밀링머신의 가공시 공구와 피삭재의 접합면에서는 절삭가공의 잔유물인버(Burr)가 생성되고, 이러한 버는 작업효?ㅘ 정밀도를 감소시키며 후처리과정(Deburring)을 야기시키는 원인이 된다. 그러므로 정밀도와 작업효율을 극대화하기 위해서는 이러한 버의 생성원리를 파악함과 동시에 Exit 버 판별을 하여 최적의 가공조건을 맞추어 주어야 하는데, 이에 밀링가공을 통해 생성되는 버의 형태와 Exit 각 등을 파악, 알고리즘으로 개발하여 좀 더 효율적인 가공조건을 제시하고자 한다. 본 연구는 이제까지 개발된 실제 가공에서 사용되는 임의형상의 데이터를 통해 점, 선, 원 및 원호(Arc)에 이르는 형상을 인식하는 Exit 버 판별시스템을 소개하고자 한다. 아울러 실제 가공과 더욱 유사한 환경을 만들기 위해 단일 경로에서부터 다중경로에 이르는 복합적인 환경 구현은 물론 점과 선으로 이루어진 도형과 원(구멍)형태의 피삭재 환경을 통합, 두 가지 다른 형태의 환경이 복합적으로 존재할 경우의 Data를 인식하고 아울러 다양한 방향성을 가진 선으로 이루어진 형상에 이르기까지의 다양한 피석재 Data를 구현하고, 입력된 절삭조건을 해석하여 임의형상을 가진 다양한피삭재에서의 단일 및 다중 가공 경로 상에서 발생될 버를 해석하고 최소화 및 최적 절삭가공공정을 찾아 작업 효율성을 극대화하는 목적의 해석 알고리즘을 Windows 프로그램으로 구현하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.170-177
• /
• 1999

과공정 알루미늄 실리콘 합금 (Hypereutectic Al-Si Alloy, A390)은 내마멸성 및 우수한 강성에 의해서 자동차 부품에 많이 사용되고 있다. 본 연구에서는 초음파 진동 절삭에 의한 과공정 알루미늄 실리콘 합금의 가공성과 실리콘 석출의 실험적 연구를 수행 하였다. 최적 공구와 가공조건의 선정 실험을 통하여 보다 효과적인 초음파 진동 절삭을 수행하였으며, 과공정 알루미늄 실리콘 합금의 가공 표면거칠기와 실리콘 석출은 절삭속도와 절삭깊이와 밀접한 연관성을 갖고 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1043-1054
• /
• 1988

The optimum cutting condition of rake angle in turning was investigated in SM45C and SM20C. Results of experiments in SM45C and SM20C are as follow. Specific cutting resistance became higher as the depth of cutting, feed or cutting velocity decreases at same rake angle and resistance became low value at 20.deg.(SM45C), 10.deg.(SM20C). The optimum cutting condition for SM45C is depth of cutting 0.7mm, rake angle 30.deg., cutting velocity 200mm/min, feed 0.1mm/rev, and for SM20C is depth of cut 0.5mm, rake angle 10.deg., cutting velocity 150mm/min, feed 0.1mm/rev.The rake angle for good roughness is 15.deg for SM45C, and that for SM20C is 25.deg. The roughness is influenced by feed and it has the lowest value at 0.1mm/rev and the cutting condition is closely related with the change of cutting velocity and feed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.46-53
• /
• 2000

Hot forging of aluminum alloy has the bad machinability due to continuous chip formation caused from the ductility The bad machinability requires a labor and a high cost to produce final products after hot forging. In industrial field, T4 heat treatment is performed to improve the machinability, and the annealing and the cold sizing are followed. In this study, a series of heat treatments are introduced during hot forging operation without T4 heat treatment after forming so that it improves the machinability with reduction of the number of operations and machining cost. Instead of T4 heat treatment, water cooling and air cooling are tried and compared to find out an optimum cooling condition

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.48-53
• /
• 2009

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions are tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.