• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.70-76
• /
• 1995

생산스케쥴링의 기준이 되는 정보는 각 부품의 생산시간이나 생산비용인데, 이들은 고정된 값으로 취급되는 경우가 많다. 그러나, 실제적으로는 가공조건에 의하여 그 값들이 변화한다. 가공조거는 절삭깊이(depth of cut), 이송속도(feed rate), 및 절삭속도(cutting speed)로 구성되어 있다. 본 연구에서는 주어진 조건에 있어서 가공의 최적절삭조건을 최적이론의 하나인 페널티 함수이론(SUMT)을 이용하여 결정하는 할고리즘을 개발하였다. 알고리즘에서 목표함수(objective functions)로는 표면거칠기, 파워 소비, 등을 고려했다. 개발된 알고리즘 프로그램의 유용성을 증명하기 위해 선반가공의 예를 실행하여 그 결과를 예시하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.806-811
• /
• 1994

최근의 절삭가공 생산시스템은 무인자동화,고속화,정밀화로 대별되면서 생산성을 극대화시킬려는 방향으로 연구 가 진행되고 있다. 종래의 CNC화된 기계가공시스템에서는 절삭속도,이송속도 그리고 절삭깊이 등과 같은 절삭 조건은 On-line으로 조절되는 장치를 갖지 않고 Off-line으로 프로그래머의 경험이나 절삭가공의 데이터 핸드북을 통하여 결정되어진다. 이러한 절삭조건은 절삭률 즉 생산성의 측면에서 최적의 값이 될 수가 없다. 이는 프로그래머가 측면에서 최적의 값이 될 수가 없다. 이는 프로그래머가 공구의 마모나 표면거칠기, 또는 공작기계의 부하 등을 고려하여 극적으로 NC프로그램을 짜기 때문이다. 이러한 문제점 때문에 현재 개발되어지고 있는 대부분의 적응제어시스템은 실용화가 되지못하고 있는 실정이어서 효휼적인 적응시스템의 개발은 필수적이다. 따라서 본 연구에서는 무인자동화 가공시스템에서 생산성을 최대화하기 위하여 사용하는 ACO 시스템에서 발생하는 상기의 문제를 해결하여 실용화할 수 있는 가공 최적화 시스템을 개발함을 연구의 목적으로 하고 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.161-182
• /
• 2018

We carried out a series of linear cutting machine tests to assess the cutting performance of a pick cutter in sedimentary rock. The specimens were Linyi sandstone from China and Concrete (rock-like material, conglomerate). Using the small scaled LCM system, we estimated the cutter force and specific energy under different cutting conditions. The cutter forces (cutting and normal) increased with penetration depth and cutter spacing in two rock types, and it was affected by the strength of specimens. On the other hand, the ratio of the peak cutter force to the mean cutter force was influenced by cutting characteristic and composition of rock rather than rock strength. The cutting coefficient was affected by the friction characteristic between rock and pick cutter rather than the cutting conditions. Therefore, the optimal cutting angle can be determined by considering of cutting coefficient and resultant force of pick cutter. The optimum cutting condition was determined from the relationship between the specific energy and cutting condition. For two specimens, the optimum s/p ratio was found to be two to four, and the specific energy decreased with the penetration depth. The result from this study can be used as background database to understand the cutting mechanism of a pick cutter, also it can be used to design for the mechanical excavator.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.4
• /
• pp.463-470
• /
• 1986

본 연구에서는 절삭공정 중 발생하는 공구의 접촉이탈 현상에 의하여 공작 물의 절삭된 표면중에 한회전 및 그 이전 회전에 절삭된 절삭면의 형상이 현재의 절삭 깊이에 영향을 미치는 다중재생효과(multiple regenerative effect)가 존재하는 선삭 작업에서 공구의 착탈현상을 고려한 비선형채터(nonlinear chatter)를 공작기계의 생 산성의 관점에서 절삭공정의 특성을 고려하여 해석하였으며, 수동제어기의 일종인 임 펙트댐퍼를 절삭공정에 응용하여 절삭작업중에 공작기계의 안정성향상 뿐만 아니라 생 산성의 증가효과를 규명하였다.아울러 댐퍼자체의 설계변수에 따른 채터 억제효과 를 고려하여 최적의 댐퍼를 설계하는 방법을 제시하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.170-177
• /
• 1999

과공정 알루미늄 실리콘 합금 (Hypereutectic Al-Si Alloy, A390)은 내마멸성 및 우수한 강성에 의해서 자동차 부품에 많이 사용되고 있다. 본 연구에서는 초음파 진동 절삭에 의한 과공정 알루미늄 실리콘 합금의 가공성과 실리콘 석출의 실험적 연구를 수행 하였다. 최적 공구와 가공조건의 선정 실험을 통하여 보다 효과적인 초음파 진동 절삭을 수행하였으며, 과공정 알루미늄 실리콘 합금의 가공 표면거칠기와 실리콘 석출은 절삭속도와 절삭깊이와 밀접한 연관성을 갖고 있다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.1-7
• /
• 2007

재료의 중량과 강도는 기계부품 특히 항공기의 부품에 중요한 요소가 되므로 가볍고 강인한 열처리 강화 알루미늄이나 티타늄 등이 많이 사용된다. 그러나 알루미늄은 용융점이 낮기 때문에 기계 가공 시 발생되는 열에 의해 부품이 얇고 길수록 쉽게 변형된다. 본 연구는 end milling 가공에서 최적의 절삭 parameter를 선정하여 열 변형을 최소화한다. 밀링 가공의 절삭속도, 이송속도, 절삭 깊이를 실험 인자로 정하여 다구찌 방법으로 실험을 계획하고 얇은 시편을 절삭하여 특성을 측정한다. 결과를 분산분석 (ANOVA) 과 signal to noise 비를 (SNR) 분석하여 최소 열 변형의 절삭 parameter를 찾는다. 실험의 data를 SQL database 프로그램화하여 다양한 절삭 환경에서 최소 열 변형과 최소 표면거칠기의 parameter를 찾을 수 있도록 하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.74-81
• /
• 2013

The high-speed machining in the manufacturing industry field has been widely applied for parts of vehicles, aircraft, ships, electronics, etc., recently, because the effect of cost savings for shortening processing time and improving productivity is great. The purpose in this study is to investigate the effect of cutting depth on the surface roughness of workpiece with the spindle rotational speed and feed rate of high-speed machines as a parameter to find the optimal depth in the finishing for ball end mill of the aluminum alloy 7075 which is used much in aircraft parts. When the cutting depth for the respective feed rate and spindle rotational speed is varied from 0.1 mm to 0.7 mm at intervals of 0.2 mm in the wet finishing of the aluminum alloy 7075 by the insoluble cutting oils and high-speed machining used in the rough machining of previous study, the surface roughness values and the cutting temperature are measured. In addition, the cutting surface shapes of test specimens are observed by optical microscope and compared with respectively. It is found that the surface roughness values and the temperature generated during machining are increased as the feed rate and cutting depth are raised, but those are decreased as the spindle rotational speed is increased.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.221-233
• /
• 2016

In order to estimate the performance of a conical cutter depending on the insert size, this study measured forces acting on conical cutters with different cutter spacings, penetration depths and skew angles using slim and heavy conical cutters. When cutter spacings ranged from 12 to 27 mm, the deviations of mean cutter forces with cutter depths appeared smaller compared to other cutter spacings. When skew angle is $0^{\circ}$, the optimal S/d ratio was obtained in the range of 4 to 4.5 for which specific energy of cutting was minimized. It were usually found in the range of 1 to 5. However, when skew angle is $6^{\circ}$, the optimal S/d ratio was obtained in the range of 1 to 3. The simple comparison results shows that the performance of slim cutter was superior to that of heavy cutter, but the use of heavy cutter can be effective, considering the cutter consumption and cutter damage when the strength of the ground is high enough.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.573-584
• /
• 2014

In this study, the variations of cutter acting forces depending on cutting conditions were examined to obtain basic data for roadheader cutting head design. The linear cutting tests were performed in the condition of different attack angles, penetration depths, cutter spacings by using a slim conical pick for the light cutting condition. Cutter acting forces were measured by 3-directional load cell under different test conditions, and the analysis for cutting performance were carried out after calculating average values of the measured results. It is confirmed that the optimal cutting condition for the mortar specimen is the 50 degree attack angle, the cutter spacing of 12 mm, the cutting depth of 9 mm which are obtained from the analysis results. In addition, 50 degree attack angle is more effective than 45 degree attack angle to design optimal specifications of cutting head.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.217-236
• /
• 2006

In this study, the LCM was applied as the preliminary study for the cutterhead design of TBM and the drilling performance evaluation. The optimum cutting condition is obtained from the LCM tests and the effects of the design factors of IBM cutterhead, such as penetration depth and cutter spacing, on drilling performance are estimated. In this study, hence, to predict the accurate performance of TBM, instead of one-dimensional penetration depth applied in existing studies, three-dimensional cutting volume was quantified and measured. For this, the digital photogrammetry technique was applied to the LCM tests. Also, AUTODYN 2D was applied to investigate the applicability of the numerical analysis technique to simulate the cutting process of rock by the TBM disc cutter.