• Journal of Mushroom
• /
• v.22 no.2
• /
• pp.60-66
• /
• 2024

This study was conducted to selection and investigate appropriate conditions for mass production of antagonistic microbes to control cobweb disease caused by Cladobotryum mycophilum. A grampositive bacterium was isolated from spent substrate of Agaricus bisporus and showed significant antagonistic activity against Cladobotryum mycophilum. The bacterium was identified as Bacillus altitudinis. based on the cultural, biochemical and physiological characteristics, and 16S rRNA sequence. The isolate is saprophytic, but not parasitic nor pathogenic to cultivated mushroom whereas it showed strong inhibitory effects against C. mycophilum cells in vitro. The control efficacy of B. altitudinis HC7 against cobweb disease of C. mycophilum was up to 78.2% on Agaricus bisporus. The suppressive bacterium may be useful for the development of biocontrol system. To define the appropriate conditions for the mass production of the Bacillus altitudinis HC7, we have investigated appropriate culture conditions and effects of various nutrient source on the bacterial growth. The appropriate initial pH and temperature were determined as pH 6.0 and 30℃, respectively. The appropriate concentration of medium elements for the growth of pathogen inhibitor bacterium(Bacillus altitudinis HC7) was determined as follows: 3.0% soluble startch, 10% soytone, 1.0% (NH₄)₂HPO₄, 1.0 mmol KCl, and 0.5% L-asparagine.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.476-484
• /
• 2024

Although two-dimensional (2D) monolayer cell culture models are still widely used as the optimal models for anticancer activity research, three-dimensional (3D) multicellular tumor spheroid (3D MTS) models that can better approximate the tumor environment can offer an alternative to bridge the gap between in vitro and animal model studies. Isoalantolactone is among the sesquiterpene lactones found in medicinal plants, including the roots of Elecampane (Inula helenium L.), and is known to have various pharmacological activities, including anticancer activity. In this study, we investigated whether the anticancer activity of isoalantolactone observed in 2D models could be reproduced in a 3D MTS model derived from human hepatocellular carcinoma (HCC) Hep3B cells. According to our results, isoalantolactone inhibited the formation of MTSs in a manner dependent on the treatment concentration, which was accompanied by an increase in reactive oxygen species (ROS) generation. In particular, as isoalantolactone treatment and the culture time increased, the area of proliferating cells was replaced by cells in which apoptosis was induced. Additionally, in MTSs, isoalantolactone increased the expression of death-receptor-related proteins and the activity of caspase-3, and it decreased the expression of the Bax/Bcl-2 expression ratio and total poly(ADP-ribose) polymerase. However, when the production of ROS was artificially blocked, all these changes caused by isoalantolactone were attenuated and the cell survival rate of MTS cells was restored. Therefore, the results of this study suggest that the induction of apoptosis in Hep3B cell-derived MTSs by isoalantolactone is achieved through the activation of extrinsic and intrinsic pathways and is ROS-dependent.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.91-101
• /
• 2009

in the cosmetics and medical supply field as a antioxidant material. The stable nano particle emulsion of skin toner type containing VEA was prepared. To evaluate the skin permeation, experiments on VEA permeation to the skin of the ICR outbred albino mice (12 weeks, about 50 g, female) and on differences of solubility as a function of receptor formulations was performed. The analysis of nano-emulsions containing VEA 0.07 % showed that the higher ethanol contents the larger emulsions were formed, while the higher surfactant contents the size became smaller.In this study, vitamin E acetate (VEA, tocopheryl acetate), a lipid-soluble vitamin which is widely used A certain contents of ethanol in receptor phase increased VEA solubility on the nano-emulsion. When the ethanol contents were 10.0 % and 20.0 %, the VEA solubility was higher than 5.0 % and 40.0 %, respectively. The type of surfactant in receptor solution influenced to VEA solubility. The comparison between three kind surfactants whose chemical structures and HLB values are different, showed that solubility of VEA was increased as order of sorbitan sesquioleate (Arlacel 83; HLB 3.7) > POE (10) hydrogenated castor oil (HCO-10; HLB 6.5) > sorbitan monostearate (Arlacel 60; HLB 4.7). VEA solubility was also shown to be different according to the type of antioxidant. In early time, the solubility of the sample including ascorbic acid was similar to those of other samples including other types of antioxidants. However, the solubility of the sample including ascorbic acid was 2 times higher than others after 24 h. Franz diffusion cell experiment using mouse skin was performed with four nano-emulsion samples which have different VEA contents. The emulsion of 10 wt% ethanol was shown to be the most permeable at the amount of 128.8 ${\mu}g/cm^2$. When the result of 10 % ethanol content was compared with initial input of 220.057 ${\mu}g/cm^2$, the permeated amount was 58.53 % and the permeated amount at 10 % ethanol was higher 45.0 % and 15.0 % than the other results which ethanol contents were 1.0 and 20.0 wt%, respectively. Emulsion particle size used 0.5 % surfactant (HCO-60) was 26.0 nm that is one twentieth time smaller than the size of 0.007 % surfactant (HCO-60) at the same ethanol content. Transepidermal permeation of VEA was 54.848 ${\mu}g/cm^2$ which is smaller than that of particlesize 590.7 nm. Skin permeation of nano-emulsion containing VEA and difference of VEA solubility as a function of receptor phase formulation were determined from the results. Using these results, optimal conditions of transepidermal permeation with VEA were considered to be set up.

• Korean journal of applied entomology
• /
• v.13 no.4 s.21
• /
• pp.181-204
• /
• 1974

The study has been carried out to investigate the occurrence, damage, host range, transmission and control of rice stripe virus in Korea since 1965. 1 Disease occur「once and damage : The virus infection during the seedling stage ranged from 1.3 to $8\%$. More symptom expression was found in regrowth of clipped rice than infected intact plants, and the greater infection took place in early seasonal culture than in ordinary seasonal culture. A higher incidence of the disease was found on the rows close to the bank, and gradually decreased toward the centre of the rice paddy. Disease occurrence and plant maturity was highly correlated in that the most japonica rice types were diseased when they were inoculated within 3 to 7 leaf stage, and$50\%$, $20\%$ and no diseaseb were found if they were inoculated at 9, 11 and 13 leaf stages, respectively. Symptom expression required 7-15 days when the plants were inoculated during 3-7 leaf stages, while it was 15-30days in the plants inoculated during 9-15 leaf stages. On Tongil variety the per cent disease was relatively higher when the plants were infected within 1.5-5 leaf stages than those at 9 leaf stage, and no disease was found on the plants infected after 15 leaf stage. The disease resulted in lowered growth rates, maturity and sterility of Tongil variety although the variety is known as tolerant to the virus. 2. Host range: Thirty five species of crops, pasture grasses and weeds were tested for their susceptibility to the virus. Twenty one out of 35 species tested were found to be susceptible. and 3 of them, Cyperus amuricus Maximowics var. laxus, Purcereus sanguinolentus Nees and Eriocaulon robustius Makino, were found as new hosts of the virus. 3. Transmission: The vector of the virus, Laodelphax striatellus, produces 5 generations a year. The peak of second generation adults occurred at June 20th and those of third was at about July 30th in Suweon area. In Jinju area the peak of second generation adult proceeded the peak at Suweon by 5-7 days. The peaak of third generation adult was higher than the second at Jinju, but at Suweon the reverse was true. The occurrence of viruliferous Laodelphax striatellus was 10-15, 9, 17, 8 and about $10\%$ from overwintered nymph, 1st generation nymph, 2nd generation adult, End generation nymph and the remaining generations, respectively. More viruliferous L. striatellus were found in the southern area than in the central area of Korea. The occurrence of viruliferous L. striatellus depended on the circumstances of the year. The per cent viruliferous vectors gin 2nd and 3rd generation adult, however, was consistantly higher than that of other generations. Matings of viruliferous L. striatellus resulted in $90\%$ viruliferous progenies, and the 3rd, 4th and 5th instars of the vector had higher infectiviey than the rest of the vector stages. The virus acquisition rate of non-viruliferous L. striatellus was $7-9\%$, These viruliferous L. striatellus, however, could not transmit the virus for more than 3 serial times. The optimum temperature for the transmission of the viru3 was $25-30^{\circ}C$, while rare transmission occurred when the temperature was below $15^{\circ}C$. The per cent of L. striatellus parasitization by Haplogonatopus atratus were $5-48\%$ during the period from June to the end of August, and the maximum parasitization was $32-48\%$ at around July 10. 4. Control: 1) Cultural practices; The deeper the depth of transplanting more the disease occurrence was found. The higher infection rate, $1.5-3.5\%$, was observed during the late stages of seedling beds, and the rate became lower, $1.0-2.0\%$, in the early period of paddy field in southern area. Early transplanting resulted in more infection than early seasonal culture, and the ordinary seasonal culture showed the lowest infection. The disease also was favored by earlier transplanting even under tile ordinary seasonal culture. The higher the nitrogen fertilizer level the more the disease occurrence was found in the paddy field. 2) Resistant varieties; Tongil varieties shelved the resistant reaction to the virus in greenhouse tests. In the tests for resistance on 955 varieties most japonica types shelved susceptible reactions, while the resistant varieties were found mostly from introduced varietal groups. 3) Chemical control; Earlier applications of chemicals, Disyston and Diazinon, showed better results when the test was made 4 days after inoculation in the greenhouse even though none of the insecticides shelved the complete control of the disease. Three serial applications of chemicals on June 14, June 20 and June 28 showed bettor results than one or two applications at any other dates under field conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.