• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.139-142
• /
• 1997

본 논문에서는 기존 FCM(Fuzzy C-Means) 타입 클러스터링 알고리즘의 선은 향상을 위한 설계 방법을 제시한다. 우선 클러스터의 응집성(compactness)과 분리성(separation)을 동시에 고려한 성능 지수를 정의하고, 이를 진화 프로그램을 통하여 최적화 한다. 또한 실험을 통하여 기존 연구들과의 비교 및 제안된 방법론의 유효성을 보인다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.9-16
• /
• 2017

In this paper, the aerodynamic design process of wind turbine blades is established. The optimization design strategy is presented and the constraints that must be reviewed during the aerodynamic design process are summarized. Based on this, this study developed a BEMT-based aerodynamic optimal design program that can be applied easily to actual work, not only for research purposes, but also can be integrated from the initial concept design stage to the final 3D shape detail design stage. The developed program AeroDA consisted of a concept design module, basic design module, optimal TSR module, local shape optimization module, performance analysis module, design verification module, and 3D shape generation module. Using the developed program, an improved design of the 5MW blade by NREL was made, and it was confirmed that this program could be used for design optimization. In addition, a 10kW blade aerodynamic design and turbine detailed performance analysis were carried out, and it was verified by a comparison with the commercial program DNVGL Bladed.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.41-46
• /
• 2013

IIn this paper, active trasfemoral prosthesis leg is designed for the handicapped who lost their legs upon knee. It is important to design proper knee joint to mimic walking motion of hyman. 1 degree-of-freedom active trasfemoral prosthesis leg is designed with knee joint. Operating angle and torque have been calculated using kinematics of three linkages in prosthesis leg. Finite element analysis of major components is performed to evaluate the safety under operating condition and to reduce weights. Minimum volumes of components are obtained by optimization as satisfying safety requirements. The results show that about 35% of weight of components is reduced.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.105-113
• /
• 2002

As the number of pedestrian accident increases, the reconstruction of an accident becomes important to find the source of the fault. Generally, accidents are reconstructed by the intuition of experts or primitive physics. A reconstruction method is proposed using sophisticated optimization technology. At first, a dynamic simulation model is established for the accident environment. Occupant analysis for automobile crashworthiness is employed. The situation before an accident is identified by optimization. The impact velocity and the position of the pedestrian are utilized as design variables. The design variables are found by minimizing the difference between the simulation and the real accident. The optimization process is performed by linking an occupant analysis program MADYMO to an optimization program VisualDOC. Since the involved analysis is dynamics and highly nonlinear, response surface method is selected for the optimization process. Problems are solved for various situations.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.37-44
• /
• 2000

In this paper, we described the real-time implementation effort of MPEG-4 audio HVXC (Harmonic Vector eXcitation Coding) algorithm for very low bitrates, which has target applications from mobile communications to Internet telephony, on current high performance floating point TMS320C6701 DSP. We adopted a hardware structure for real-time operation. In order for software optimization, we used C- and assembly-language level optimizations for time-critical functional codes. Utilizing the internal program memory of the DSP as the program cache, the internal data memory overlap technique and DMA functionality, we could get a goal of realtime operation of HVXC codec both at 2 kbit/s and at 4 kbit/s. For an encoder at 2 kbit/s, the optimization ratio to original code is about 96 %. Finally, we got the subjective quality of MOS 2.45 at 2 kbit/s from an informal quality test.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.181-186
• /
• 2017

The system optimization is a technique that changes the structure of the program in order to extract the duplicated modules without changing the source code, reuse of the extracted module. Structure-oriented development and object-oriented development are efficient at crosscutting concern modular, however can't be modular of crosscutting concept. To apply the crosscutting concept in an existing system, there is a need to a extracting technique for distributed system optimization module within the system. This paper proposes a method for extracting the redundant modules in the completed system. The proposed method extracts elements that overlap over a source code analysis to analyze the data dependency and control dependency. The extracted redundant element is used to program dependency analysis for the system optimization. Duplicated dependency analysis result is converted into a control flow graph, it is possible to produce a minimum crosscutting module. The element extracted by dependency analysis proposes a system optimization method which minimizes the duplicated code within system by setting the crosscutting concern module.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.251-257
• /
• 2012

The flight controller should meet the flying qualities, stability margins, and time response requirement according to the class of a target aircraft or UAV. Classical design process of PID controller is a very time consuming process and needed trial and erros. The best way is to apply the multi-disciplinary optimization algorithm to meet the numerous constraints of controller requirements. This paper presents how multi-objective parameter optimization (CONDUIT) can be used to determine many design parameters of lateral stability and augmentation system for roll and heading controller of the small UAV. To verify the effectiveness of applying the optimization method, designed controller using optimization are compared with the baseline controller that is designed only considering the time responses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.519-526
• /
• 2009

This paper describes a research result of a external shape optimization study to maximize the range of the guided missile with canards and tailfins in atmospheric flight. For this purpose, the external shape optimization program which can enhance the range of a missile was developed, incorporated with the trajectory analysis and the optimization technique. In the trajectory analysis part, Missile DATCOM which utilizes the semi-empirical method was directly connected to the trajectory code to supply the aerodynamic coefficients efficiently at every time step. In the gliding flight trajectory after apogee, a maximum $C_L/C_D$ trim condition calculation module was attached under the assumption of the missile continuously flying at maximum $C_L/C_D$ condition. In the optimization part, a Response Surface Method(RSM) was adopted to reduce the computing time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.754-757
• /
• 2007

This paper presents automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce average gamma error and adjusting time. The proposed gamma system contains module-under-test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. We have developed a new algorithm using 6-point programmable matching technique with reference gamma curve. Developed algorithm and program are generally applicable for most of the LCD modules.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.22-31
• /
• 2005

A design study was conducted for a new concept aircraft(Canard Rotor/Wing: CRW) that has the capability of dual mode flight, a rotorcraft and a fixed wing mode. The CRW can show a vertical take off/landing and a high speed/efficiency cruise performance simultaneously. It is not surprising to develop a new sizing code for this class of aircraft because conventional sizing codes developed solely for either the rotary wing or the fixed wing aircraft are not adequate to design a dual mode aircraft operated both by the rotary wing through tip jet effux and the fixed wing lift. Thus, a new design code was developed based on the conventional sizing code by adding some features including rotor performance, duct flow, and engine flow analysis, hence could eventually predict the performance of reaction driven rotor, the flight performance and the flight characteristics. The various design parameters were investigated to find their influences on the flight performance then, a small UAV(Unmanned Aircraft Vehicle) of 1500 lbs class was optimally designed to have minimum weight using the developed sizing code.