• Cement
• /
• s.92
• /
• pp.41-54
• /
• 1983

Calcium Silicate의 생성 및 분해에 미치는 $K_2SO_4$와 $MgSO_4$의 영향을 비교 검토하였으며 Calcium Silicate의 생성을 최대로 하는 $SO_3$, MgO와 $K_2O$의 최적비를 반응표면분석기법으로 조사하였다. $K_2SO_4$의 혼합비 증감에 따라 $C_3S$의 생성촉진에 미치는 영향은 없었다. $C_3S$의 조합원료에 $CaSO_4$를 4.0wt$\%$이상 첨가시 $CaSO_4$는 $C_2S$주위에 Sulphate reaction rim을 형성함으로써 $C_2S$와 CaO의 반응을 방해해 $C_3S$의 생성을 억제하였으나 적당량의 MgO가 첨가되면 $CaSO_4$가 4.0wt$/%$이상이라도 $C_3S$의 생성은 억제되지 않았다. $C_3S$의 생성을 최대로 하기 위한 $SO_3$, MgO와 $K_2O$의 최적비를 반응표면분석기법을 이용하여 다음과 같은 결론을 얻었다. 1. $K_2SO_4$는 $K_2O$에 비해 소결에 미치는 영향이 적으므로 크링카에 고용되고 남은 $K_2O$는 전량 $K_2SO_4$로 전환시켜야한다. 2. $SO_3$와 $K_2O$의 최적비율은 1.5이다. 3. $CaSO_4$와 MgO의 최적비율을 유지하기 위해서는 $CaSO_4$중의 wt$\%SO_3$=0.7의 수준으로 Sulphate의 함량을 조절하여야 한다. 4. $SO_3$와 결합하고 남은 $K_2O$가 0wt$\%$인 경우는 $K_2SO_4$=2.3wt$\%$, MgO=1.5wt$\%$일때 $C_3S$의 생성이 최대로 된다. 5. $SO_3$와 결합하고 남은 $K_2O$가 2.0wt$\%$인 경우는 $K_2$$SO_4$=4.5wt$\%$, MgO=3.0wt$\%$일때 $C_3S$의 생성이 최대로 된다.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.169-180
• /
• 2024

In this study, to suggest an efficient method of using coal gasification slag(CGS), a byproduct from integrated gasification combined cycle(IGCC), as a combined fine aggregate for concrete mixture, the diverse performances of concrete mixtures with combined fine aggregates of CGS, river sand, and crushed sand were evaluated. Additionally, using CGS, the reduction of the hydration heat and the strength developing performance were analyzed to provide a method for reducing the heat of hydration of mass concrete by using combined fine aggregate with CGS and replacing fly ash with cement. The results of the study can be summarized as follows: as a method of recycling CGS from IGCC as concrete fine aggregate, a combination of CGS with crushed sand offers advantages for the concrete mixture. Additionally, when the CGS combined aggregate is used with low-heat-mix designed concrete with fly ash, it has the synergistic effect of reducing the hydration heat of mass concrete compared to the low-heat-designed concrete mixture currently in wide use.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.24-31
• /
• 2021

The soundproof tunnels have been generally designed with H-beam girders, and the high weight of H-beam may cause the excessive design of the substructure. To solve this problem, this paper proposes a new soundproof tunnel girder design composed of pipes and discontinuous plates. First, the structural behavior of the straight girder according to the design parameters was examined through finite element analysis. The arrangement and shape of the plates were determined as the design parameter, to obtain the optimal design of girder. After then, the structural behavior and buckling stability of the arched girder were subsequently evaluated. As a result of the parameter analysis, it was confirmed that the axial force acting on the girder increased and the moment decreased as the ratio of unsupported sections decreased or the number of supporting plates increased. The stress concentration on the pipe member was relieved by increasing the long axis length of the elliptical plate. Arched girder analysis showed that the structural efficiency increase as the long axis of elliptical plate increase. As a result of the buckling evaluation, the buckling threshold load of the three connected girders was about 3.7 times higher than the design load. Consequently, it was confirmed that the proposed soundproof tunnel structure design satisfies both light weight and structural safety.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.6
• /
• pp.51-60
• /
• 2015

In statutes on the promotion of distribution of new and renewable energy, which were revised in 2014, daylight system and fuel cell were added in addition to existing new and renewable energy sources. This study, therefore, aimed at setting up targets for the introduction of daylight system and analyzing the installation rate of new and renewable energy which can be provided by daylight system for the aggressive use of daylight system, thereby deducting the optimal combination ratio with other new and renewable energy sources. The results of the study are as follows. First, when a prism-shaped daylight system was installed to a round indoor gymnasium among domestic indoor gymnasiums, out of a supply obligations allotment rate of 15% of new and renewable energy, the rate of daylight system was basically set at 2.5%. Second, therefore, with daylight system coming first, the lacked supply obligations rate was taken up by solar photovoltaic, solar heat and geothermal heat. In addition, using the KRESS Program, economic, technical, environmental and complexity evaluations for the upper 5% was made, deducting the optimal ratio of the system. The results produced the following optimal combination ratios: solar photovoltaic (83.3%) in economic evaluation, solar heat (8.3%) and geothermal heat (75%) in technical evaluation, solar photovoltaic (83.3%) in environmental evaluation, and solar photovoltaic (83.3%, the same as in economic evaluation) in complexity evaluation.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.45-50
• /
• 2015

In Korea ranking sixth out of The world's greenhouse gas emissions, all Korean public buildings have to implement obligatorily renewable energy systems for energy production to reduce the greenhouse gas emissions from the energy consumed in operation, maintenance and management of buildings. The optimum combination and application rates for each energy source emerge from analyzing the trend of previous studies and the energy consumption is simulated by using a dynamic energy simulation program and the initial investment costs, the energy costs, the maintenance costs, the replacement costs emerge based on the calculated result. The result show that the total life cycle cost of 100% gerthermal is the lowest with \ 2,105,974,344 on the analysis results.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.348-354
• /
• 1992

In order to improve the productivity of invertase by recombinant Saccharomyces cerevisiae containing SUC2 gene, the effect of amino acids and dissolved oxygen concentration on the gene expression was investigated. Optimal concentrations of leucine and histidine for cell growth and cloned gene expression were 0.03 gig and 0.04 gig, respectively, expressed as the ratio of amino acid/glucose. The lack or excess of leucine and histidine has inhibitory effect on cell growth and invertase expression. In batch culture, the less aeration was, the higher invertase activity was. In continuous culture at a dilution rate of 0.09 h 1 with controlled dissolved oxygen tension, invertase activity increased dramatically at DOT levels below 5% air saturation, and a maximum activity of 215.54 KUlg cell was obtained under unaerated condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.61-71
• /
• 2014

This study carried out finite element vibration analysis of composite plate structures for construction using multi-scale approaches, which is based on the higher-order theory. The finite element (FE) models for composite structures using multi-scale approaches described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the effect of the material combination. The FE model is used for studying free vibrations of laminated composite plates for various fiber-volume fractions. In particular, new results reported in this paper are focused on the significant effects of the fiber-volume fraction for various parameters, such as fiber angles, layup sequences, and length-thickness ratios. It may be concluded from this study that the combination effect of fiber and matrix, largely governing the dynamic characteristics of composite structures, should not be neglected and thus the optimal combination could be used to design such civil structures for better dynamic performance.

• Food Science and Preservation
• /
• v.20 no.2
• /
• pp.272-277
• /
• 2013

The physicochemical and sensory properties of herb samgyetang, ginseng chicken soup added with medicinal herbs were investigated to determine the optimum addition level of medicinal herbs. The pH of herb samgyetang decreased with increasing addition level of the Acorus gramineus addition level, and the soluble solid content increased as the Codonopsis lanceolata addition level increased. The herb samgyetang with the highest Codonopsis lanceolata addition level had the lowest $L^*$ and $b^*$ value. In contrast, the $a^*$ value increased with increasing Codonopsis lanceolata addition level. In sensory evaluation, the highest color, taste, and overall acceptability scores were obtained by the herb samgyetang with the highest Codonopsis lanceolata addition level. In conclusion, the optimum addition levels of medicinal herbs for herb Samgyetang are as follows: Platycodon grandiflorum 4 g, Acorus gramineus 4 g, Codonopsis lanceolata 12 g, Schizandra chinensis 6 g, Atractylodeslancea 4 g, Glycyrrhiza uralensis 4 g, and Zizyphus jujube 4 g.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.200-201
• /
• 2006

현재상용화 되어 있는 AC PDP는 Ne, Xe 혼합가스를 주로 사용한다. Xe gas의 비율이 높아짐에 따라 PDP의 휘도와 효율은 상승하지만 그와 동시에 방선 전압도 함께 상승하여 이 분야의 연구가 요구된다. 그래서 우리는 Ne gas를 버퍼 가스의 사용하괴 Xe gas를 0${\sim}$15%, Kr gas를 0${\sim}$50% 비율의 첨가하여 패널의 방전 개시 전압, 방선 유지 전압, 방선 마진, 휘도, 효율을 측정하였다. 그 결과 방선 개시 전압이 같고 효율이 각각 2.93[Im/w], 3.23[Im/w]인 Xe10%+Kr20%, Xe5%+Kr40%와 같은 최적의 3원 가스조합을 찾아내었다. 또한 Xe gas와 Kr gas의 합이 40%일 때 효율이 가장 좋아지는 것을 알 수 있었다.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.99-99
• /
• 2010

최근 자동차 산업은 고효율 및 친환경이라는 전세계적인 이슈에 따라 고연비의 자동차 개발에 총력을 다하고 있다. 그러므로 다양한 고강도 강 및 경량 금속이 자동차의 차체에 적용되고 있다. 특히 철강재료에 있어서 기존의 저 탄소강에서 다양한 기능을 갖은 고강도 강으로 그 종류가 다양화되고 있으며 이에 따라 저항 점용접을 이용한 차체의 접합은 점점 이종의 강판을 접합하는 비율이 점차로 늘어나고 있다. 이와 같이 강판의 종류가 다양해짐에 따라 수많은 이종 강판에 대한 조합이 생기고 있으며, 이를 모두 실험을 통해 최적 용접조건을 찾기에는 많은 시간과 노력이 투자되어야 된다. 그러나 시뮬레이션 기법으로 이종 접합의 초기 용접조건에 대한 정보를 얻는다면, 최소의 실험을 통해 좀 더 손쉽게 최적의 용접조건을 도출할 수 있다. 그러므로 본 연구에서는 실제 자동차에 많이 쓰이는 강판인 EDDQ급 도금강판 0.7t와 440R 급 1.2t 및 DP 590 1.0t의 3종류의 이종 강판에 대한 점 용접특성을 저항 점용접 전문 소프트웨어인 SORPAS를 이용하여 시뮬레이션하고 분석하였다. 시뮬레이션은 겹치기 순서에 따라 용접 전류, 가압력, 용접 시간을 변수로 하여 각각의 겹침 순서에 대한 2개의 용접 점에 대한 너겟의 크기를 분석하였으며 로브 곡선을 얻을 수 있었다. 이를 통해 3겹의 겹치기 순서에 따른 용접 특성을 비교할 수 있었으며, 이것을 실제 생산라인의 자동차 차체의 조립 순서 결정에 있어서 응용함으로써 용접 특성을 고려한 차체 조립에 적용이 가능할 것으로 사료된다.