• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.671-680
• /
• 2022

In this paper, A 200kW traction motor driver that covers most of the traction motor specification of commercial electric vehicles (EV) is developed. In order to achieve high efficiency and high power density, a next-generation power semiconductors (Silicon carbide, SiC) are applied instead of power semiconductor(IGBT), which is Si based. Through hardware analysis for optimal use of SiC, expected efficiency and heat dissipation characteristics are obtained. A vector control algorithm for an IPMSM (Interior permanent magnet synchronous motor), which is mostly used in EV(Electric vehicle) traction motor, is implemented using DSP (Digital signal processor). In this paper, a prototype traction motor driver based SiC for EV is designed and manufactured, and its performance is verified through experiments.

• Journal of Industrial Convergence
• /
• v.21 no.7
• /
• pp.83-92
• /
• 2023

The bullet shape of the plasma jet using the atmospheric-pressure dielectric barrier discharge method changes depending on the applied fluid rate and the intensity of the electric field. This changes appear as a difference in spectral distribution due to a difference in density of the DBD plasma jet. It is an important factor in utilizing the plasma device that difference between the occurrence of active species and the intensity through the analysis of the spectrum of the generated plasma jet. In this paper, a plasma jet generator of the atmospheric pressure volume DBD method using Ar gas was make a prototype in accordance with the proposed design method. The characteristics jet fluid rate analysis of Ar gas was accomplished through simulation to determine the dependence of flow rate for the generation of plasma jets, and the characteristics of plasma jets using spectrometers were analyzed in the prototype system to generate optimal plasma jet bullet shapes through MFC flow control. Through the design method of the proposed system, the method of establishing the optimal plasma jet characteristics in the device and the results of active species on the EOS were verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8274-8283
• /
• 2015

Gas springs of the television is to control the piston speed when operating under along stroke(200~300 mm, television elevation)is possible. User by this principle is capable of elevation adjustment. First carried out a flow analysis of the piston. A piston speed adjustment technique for precise pipe type cross-section was examined. The piston structure for flow rate control and elevation action is proposed. This study is the development of a gas spring of more than 50 inch television with a large television stand. Hollow piston rod for optimal control(the outer diameter 19.9 mm, the inner diameter 13.9 mm) was injected into the nitrogen gas(0.3 mm/s) in. As a result, the flow rate the pressure drop of the piston rod as the increase was increased without any change of the external force. As a result, control of the displacement via the gas spring is possible.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.513-517
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator} applied to X-band as stable source is implementea and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity and high Q varactor diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated through the harmonic balance simulation technique to provide the optimum performance. The measured results of a fabricated VCDRO show that output is 2.22dBm at 12.05GHz. harmonic suppression -30dBc. phase noise -130dBc at 100kHz offset. and sweep range of varactor diode $\pm$18.7MHz. respectively. This oscillator will be available to X-band application.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.85-91
• /
• 2014

Nowadays, Dynamic lighting control and management skills are studied and used. If the system which is to manage multiple intelligent spot applied ubiquitous service technology is built with decision making and used in the complex intelligent space like a apartment then will improve energy efficiency and provide comfortability in optimal conditions. To solve this problem distributed autonomous control middleware and energy management system which process data gathering by zigbee mesh network and search proper services to save energy by the existing state of things is necessary. In paper we designed DDLEMS (Distributed Dynamic Lighting Energy Management System) that is to service duplex communication embedded by software based home server platform to provide mobile services in the smart place and support decision making about energy saving to the best use of wireless censor node and controled network, energy display devices.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.2
• /
• pp.1-10
• /
• 2016

In this paper, we consider the algorithms and numerical analysis for real-time integrated control system and resource management of large-scale manufacturing smart factory system. There various data transmitted on Cyber-Physical-System (CPS) is necessary to control in real time, as well as the terminal and the platform with respective system service. This will be a true smart manufacturing which consisting of existing research results, and a numerical analysis by the parameter-specific information. In this paper, Jacoby calculation to reflect the optimization algorithms that are newly proposed. It also presents a behavior that optimal operational algorithm on CPS which is adapted to the sensing data. In addition, we also verify the excellence of the real-time integrated control system through experimentation, by comparison with the existing research results.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.192-197
• /
• 2002

1. 실시간 모니터링 -온실 내부환경의 계측장치로 모듈화된 단일 칩 마이크로프로세서를 이용한 하우스 모니터를 개발하였다. 개발된 다수의 하우스 모니터는 RS-485통신을 이용하여 개발된 프로토콜을 통하여 그룹 모니터와 통신하면서 계측 데이터를 전송하였고 안정된 계측 성능을 보였다. 또한 그룹 모니터는 하우스모니터로부터 수신한 데이터를 인터넷 환경 TCP/IP 통신에 의해 서버에 정보를 전송하고 데이터베이스 서버에 저장할 수 있었다. 2. 클라이언트 서버 모델 -클라이언트 모니터를 통하여 허용된 사용자들은 해당 온실의 상황을 원격지에서 파악할 수 있는 있었다. 또한 분산환경 기술을 이용하여 서버를 경유하여 데이터베이스 서버에서 데이터 셋을 가져와 과거 재배 사례 등을 조회 및 이용 가능하였다. 이는 전문가에게 접근을 허용함으로써 재배에 관한 지원이 가능하도록 하였다. 데이터 베이스 시스템으로 연계하여 온실환경 정보를 분석하는 것이 가능하였다. 3. 기대효과 및 나아가야 할 방향 -개발된 시스템을 식물 공장 내 작물의 재배환경을 데이터베이스화하여 재배사례 데이터베이스를 형성하고 작물이 가장 잘 자라는 최적 재배 환경을 연구하여 고품질의 작물 재배에 이용될 수 있다. 또한 식물공장의 운전실적, 환경 조건, 환경 조절비용 등의 분석에 효율적으로 이용될 수 있을 것으로 예상되며 각 환경인자들과의 관계를 구명하는데 도움을 줄 것이다. 축적된 작물의 재배 사례 데이터베이스를 이용하여 작물 특성 및 재배 연구에 도움을 줄 수 있을 것이다. 제어 장치들의 운영실적을 분석함으로써 제어 시스템의 효율적이고 경제적인 제어가 가능하도록 할 수 있을 것이다. 이들이 모두 완성되면 전문가 및 전문가 시스템으로부터 지원을 받는 지능형 식물공장이 가능할 것이다. 본 연구에서 개발한 계측 모듈 및 데이터베이스 시스템은 실제 농가에 설치된 전용선을 이용하여 실증 실험을 통해 수정·보완하여야 할 것이다. 또한 시설원예분야에서 있어서 통신체계에 대한 표준화 연구가 수행되어 앞으로 개발될 다른 시스템들과의 호환성을 갖도록 해야 할 것이다. 앞으로 온실의 경영 및 관리 데이터베이스를 개발하여 첨단온실의 통합 관리 및 정보 시스템을 구축하여야 할 것이다. 또한, 시설원예의 환경 설계의 기준을 적용할 수 있도록 하여야 할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.75-82
• /
• 2007

In advanced countries, a gas turbine engine is developed to use in aircraft, vessels, and target weapons. Our nation also passed the level of producing engine components and now, we are developing small-sized gas turbine engine. The most important point of the gas turbine engine, the engine control technique, is evaded by the advanced nations. This document contains the research about the development of the gas turbine engine simulator. The simulator presented in this document has a mathematical engine model based on a capacity data of the gas turbine engine to advance the engine simulator. Through this process, it eases the development of the gas turbine engine control algorithm and helps to check the engine controller function. In this simulator, the engine sensor signal conversion board is designed, so the engine model shows like a real sensor signal during the simulation. Also, this paper contrasts the actual engine test with the simulation results to verify the performance.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1609-1611
• /
• 2004

압전재료의 분극공정에서 제어되는 인가전압, 유지시간 및 온도 변수들에 대한 최적의 조건을 확립하기 위해 Rosen형 안전 변압기를 설계 및 제조하여 특성분석 하였다. 분극처리를 위한 분극전계, 온도, 유지시간 등의 외부 에너지가 증가할수록 쉽게 분극되어 포화현상이 나타났으며, 140$^{\circ}C$ 이상의 온도에서 4kV/mm의 분극전계로 3분 이상 분극시키면 최대 전압 이득을 얻을 수 있다. 또한 부하저항이 증가할수록 공진주파수는 고주파 방향으로 이동하며, 공진전류가 증가하여 전압이득이 증가하였다.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.57-64
• /
• 2012

For the vibration control of earthquake-excited buildings, an optimal design method of integrated control system considering soil-structure interaction is studied in this paper. Interaction between soils and the base of the building is simply modeled as lumped parameters and equations of motion are derived. The equations of motion are transformed into the state space equations and the probabilistic excitations such as Kanai-Tajumi power spectral density function is introduced. Then an optimization problem is formulated as finding hybrid or integrated control systems which minimizes the stochastic responses of the building structure for given constraints. In order to investigate the feasibility of the optimization method, an example design and numerical simulations are performed with tenstory building. Finally, numerical results are compared with a conventional design case that soil-structure interaction is not considered.