• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.148-155
• /
• 2009

In this paper, we analysed what effect the design variables, such as refractive index, central thickness and radius of curvature, had on the first order properties and image quality of optical systems when temperature changed. The optical parameters were varied at each temperature, then the coupling and ruler methods were used to design an athermalized lens for a phone camera. This concept was first used to design the lens for a 1/3.2" 5M phone camera. The designed lens satisfies all the specifications for a phone camera, and the variations of the back focal length(${\Delta}BFL$) are reduced to $10{\mu}m$ for a temperature range of $-10^{\circ}C$ to $+60^{\circ}C$. Also, the TTL of 5.5 mm results in a compact system. All design concepts and results discussed in this paper are expected to be useful in development for the phone and CCTV camera.

• Clean Technology
• /
• v.3 no.1
• /
• pp.106-113
• /
• 1997

The objectives of this study were to investigate the characteristics of limestone calcination and sulfation in a fluidized bed reactor with bed temperature and air velocity. The experimental results were presented as follows ; First, the bed temperature had a great influence on the calcination and the sulphur retention of limestone and paper sludge. In paper sludge, the optimum conditions in calcination and desulfurization temperature was at $800^{\circ}C$ and in natural limestone, that was at $850^{\circ}C$ or $900^{\circ}C$. Second, as air velocity increased, the specific surface area of particles decreased. But the difference of surface area according to air velocity was not too large. The specific surface area of paper sludge was larger than that of natural limestone. Third, as air velocity increased, the absorbed amount of sulfur dioxide decreased. And the absorbed amount of sulfur dioxide by paper sludge was larger than that of by natural limestone. Therefore, we knew that paper sludge was excellent absorbent and bed temperature had a great important variable on the calcination and sulphur retention in a fluidized bed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.32-32
• /
• 2003

Calcuim borate 화합물의 하나인 Colemanite 천연원광을 출발물질로 붕산을 제조하는 공정에 대한 연구로 황산 첨가량과 처리온도, 건조온도와 시간에 따라 생성되는 붕산의 결정상과 수득률, 순도 및 입자의 형상을 관찰하였다. 황산 첨가로 붕소 성분은 용해되어 액상에 남고, SO$_4$$^{2-}$ 와 결합하여 불용성 고체로 분리되고, 붕소의 온도에 따른 용해도 차를 이용하여 재결정화하는 방법으로 99% 이상의 순도를 갖는 붕산(H$_3$BO$_3$)을 얻었다. 공정의 각 단계에서 생성되는 화합물을 TG, NMR, IR, XRD, ICP 등의 방법으로 분석하여 최적 제조 조건을 찾았다.

• KOREAN POULTRY JOURNAL
• /
• v.32 no.3 s.365
• /
• pp.96-99
• /
• 2000

육계 사양가의 목적은 최소가능비용으로 육계의 만족스런 성장을 이끌어 내는데 있다. 이런 만족스런 성장을 이루기 위해서는 온도, 환기, 습도관리가 중요하나 특히 우리나라처럼 혹한, 혹서기 기후를 가진 지역에서는 환기가 다른 어떤 요인보다 더 중요하다. 일반 사양가에서는 혹한기 온도에 치중하다보면 습도가 높아지게 되고 적정습도유지에 신경을 쓰다보면 온도가 문제가 되는데 이런 경우에 우리는 환기관리의 중요성을 실감케 된다. 환기관리는 단순히 공기교체나 산소공급만을 의미하는 것이 아니라 최적의 환기관리를 통해 질병발생율을 최소화하여 생산성 극대화를 이루도록 하는데 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.14-20
• /
• 1993

비조질강은 1970년대 초반 독일에서 개발된 이래 열처리(Quenching & Tempering)가 필요없는 에너지절약형 강재로서 유럽과 일본의 자동차업계를 중심으로 그 적용량이 지속적으로 증가되고 있다. 열간단조용 비조질강의 물성은 가열온도, 단조온도 및 냉각속도 등 단조공정변수의 영향을 크게 받는다. 본 고에서는 승용차엔진용 크랭크축에의 적용을 위해 SM50C에 V을 0.15% 첨가한 비조질강의 가열온도와 냉각속도에 따른 기계적 성질과 미세조직의 변화를 파악하여 최적단조공정을 정립하고, 크랭크 축시제품을 제작하여 그물성과 내구강도를 평가하고자 한다.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.176-181
• /
• 1980

Yeast invertase was immobilized on the 2 kinds of matrices : one is an indirectly coupled enzyme to the cyanogen bromide activated Sepharose by using ${\omega}-aminohexyl$ group as an extension arm, and the other is a tightly adsorbed enzyme on the modified hydrophobic cellulose derivative which has a phenoxyacetyl group as a linkage. The enzyme preparation coupled on Sepharose retained 26.0% of the original activity against sucrose as a substrate, while the preparation immobilized on phenoxyacetyl cellulose retained 72.9% . The immobilized invertase preparation on ${\omega}-aminohexyl$ Sepharose showed the optimal pH 4.5, optimal temperature $60^{\circ}C$, activation energy $5,941\;cal/mole{\cdot}deg$ and Km' 22.2 mM against sucrose, while the preparation adsorbed on phenoxyacetyl cellulose showed the optimal pH 4.0, optimal temperature $60^{\circ}C$, activation energy $7,769\;cal/mole{\cdot}deg$ and Km' 69.9 mM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.401-407
• /
• 2014

There are increasing interests in COB (Chip On Board) that densely arranged many LED chips on one board in order to solve the heat issue. There are many problems being on the rise: the lifespan decreases as the temperature of LED devices increases; Red Shift phenomenon, in which wave length of spectral line moves from original wave length to long wave length, occurs; and optical power decreases as $T_j$ increases. In order to resolve such problems, this study selected the optimum thickness and length of Fin, planned the second Heat sink that is optimum for COB LED with 15W, and analyzed thermal mode by Solid Works Flow Simulation through 15W COB packaging with the planned Heat sink. 15W COB down-light Heat sink that is produced based on this analysis was utilized to analyze thermal mode through contact thermometer and electrical properties through Kelthley 2430.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2001

Soybeans contain the phytoestrogens genistein and daidzein, their glucosides genistin and daidzin and coumesterol. These isoflavonoid compounds are capable of producing an estrogenic response in a number of diverse species. This study determined optimum conditions for the extraction of the main isoflavones(daidzin, genistin, daidzein, genistein) in defatted soybean meal using high-performance liquid chromatography. The best optimum extraction was achieved at 75% ethanol, $80^{circ}C$, pH4 and a three hour contact time. In addition, isoflavones with high purity were separated by adding up to 4%(w/v) of calcium chloride dihydrate. Most soybean extracts were composed of $beta$-glucosidic conjugate(daidzin, genistin) which is difficult to adsorb in body. Therefore, $beta$-glucosidase was used to convert as conjugate to aglycone form (daidzein, genistein) which is easy to adsorb. The optimal conditions of enzyme reaction involved to be 8.4 units of enzyme concentration, pH5.0, $40^{circ}C$ and 40 minutes.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.619-623
• /
• 1989

The effects of temperature on yeast growth and ethanol production were investigated in batch cultures. The maximum specific growth rate of yeast was obtained at 36$^{\circ}C$ and the maximum specific production rate of ethanol was obtained at 33$^{\circ}C$. A mathematical model was employed to describe the temperature effects in ethanol fermentation and the parameters in the model were expressed as a function of temperature. Optimum temperature control strategy, from the simulation result, consists of starting the fermentation at high temperature and lowering the temperature as the fermentation proceeds.

• Clean Technology
• /
• v.8 no.4
• /
• pp.199-203
• /
• 2002

To investigate the optimal conditions for biodegradation of toluene by Pseudomonas fluorescens KCTC 1767 in a batch soil-bioreactor, the effects of rpm change from 60 to 180, and temperature change from $15^{\circ}C$ to $30^{\circ}C$ in a batch culture and the flow rate change from 55 mL/min to 85 mL/Min in soil-bioreactor on the biodegradation of toluene were studied. In a batch culture the optimal operating conditons were 60 rpm, and $30^{\circ}C$ at initial pH 7, In a soil-bioreactor the optimal flow rate was 55 mL/min in the flow rate of circulation. The lower flow rate of circulation may help to biodegrade toluene adsorped in soil and dissolved in underground water.