• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1430-1437
• /
• 2009

Functional bread was manufactured with single cell detritus (SCD) of sea tangle. The optimum ingredient formula for SCD bread was determined based on mixture model. Flour and water reduced max weight, strength, hardness and specific loaf volume, whereas the increased SCD reversed the volume change of dough. Flour increased $L^*$ and $b^*$ values of SCD bread, while SCD decreased. Flour and water decreased $a^*$ value, while SCD increased. Max weight, strength, hardness, specific loaf volume, $b^*$ value and water holding capacity (WHC) were linear model on ANOVA table, whereas distance, volume change of dough, $L^*$ and $a^*$ values were nonlinear model. The response constraint coefficient showed that SCD influenced texture of SCD bread more than flour and water did, whereas water influenced the volume change of dough, specific loaf volume and WHC more than flour and SCD did. Moreover, flour influenced color value more than did water and SCD. Distance and $a^*$ value fitted nonlinear model with interaction terms for flour-SCD and water-SCD. Optimum ingredient formula for SCD bread was: flour, 48.25%; water, 30.89%; SCD, 3.86%. Sensory evaluation of SCD bread was a little lower than industrial bread and electrolyzed SCD bread.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.839-848
• /
• 2011

TBM (Tunnel Boring Machine) tunnel should be carry out with the adopted machine until the end of excavation because of impossibility of replacement or modification of machine. Observation of the face of the tunnel is difficult, especially in EPB(Earth Pressure Balance) shield TBM, predict changes in the ground condition with analyzing data, collected during the excavation, and it should be reflected in construction. Until recently, subjects of studies on TBM are mainly the determination of machine and the development of advance rate prediction model, according to the characteristics of ground which is the target of excavation. However, study focused on the estimation of ground conditions and the improvement in operational methods using excavation data of TBM equipment, the principal of the excavation, has been done not so much. This study examine the variances in advance rate depending on changes in operating conditions and evaluate the optimal operating conditions of adopt machine, using working data obtained from EPB shield TBM project. The result of this study is suggested as follows. First, cutter head RPM and total thrust force are biggest influences on advance rate, Second, it is recommended for proper advance rate that total thrust force is controlled while optimum cutter head RPM is kept, Third, according to the increasing trend of total thrust force, the changes in ground conditions can be predicted, the appropriate operating conditions can be determined.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1825-1836
• /
• 2008

Many applications in computer graphics require complex and highly detailed models. However it is often desirable to use approximations in place of excessively detailed models in order to control the processing time. Thus, we aim to develop a notion of optimal matrix to simplify surface which can rapidly obtain the high quality 2D patterns flattening 3D surface as follows. Firstly, two 3D bodies are modeled based on existing Size Korea data. Secondly, each model is divided by shell and block for its pattern draft. Thirdly, each block is flattened by grid and bridge method. Finally, we selected the optimal matrix and demonstrated the efficiency and quality of the proposed method. This proposed approach accommodates surfaces with darts, which are commonly used in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. It is expected that this method could facilitate much better approximation in both efficiency and precision.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.9-17
• /
• 2001

To determine the effect of the characteristics of the corpus luteum (CL) and serum metabolites on pregnancy rate following embryo transfer in Hanwoo cow, recipients were synchronized the estrus with CIDR. in vivo or in vitro produced bovine embryos were transferred to synchronized recipients. The characteristics of the CL were checked by rectal palpation and ultrasound. Blood samples were collected from jugular vein at Day 7 and analysed progesterone and serum metabolites. The results obtained from this study were as follows; 1. Total 397 embryos were transferred to recipient and 121 heads out of them were pregnant. The pregnancy rate was 30.5% and slightly differences between farms. 2. There was not significantly different the pregnancy rates between the size of CL and the cavity CL. In the recipients which had more than 2ng/$m\ell$ of serum progesterone level, the pregnancy rates was in higher than others (46.6% vs. 24.4%, 15.0%). 3. The highest pregnancy rate was obtained at 90 to 110mg/㎗ in serum total cholesterol, 14 to 16mg/㎗ in BUN, and 70 to 80mg/㎗ in serum glucose, respectively, and these metabolites in blood could be used as the criteria in the selection of recipient at embryo transfer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.892-902
• /
• 2011

The purpose of this study was to develop a muffin recipe that included germinated brown rice powder soaked in a mycelial culture broth of Phellinus linteus (GBRP). Muffins were made using various quantities of GBRP, butter, and milk. An assessment was conducted using the response surface methodology (RSM), which included 16 experimental points with three replicates for the three independent variables: GBRP, butter, and milk. The physical and chemical evaluation using the RSM showed no significant differences; whereas the hardness, cohesiveness, springiness, gumminess, and chewiness indicated significant differences in the relationships between the factors (p<0.05). The sensory evaluation using the RSM was highly effective in describing the relationships between overall acceptability and taste (p<0.001). Thus, the optimal combination of ingredients in a GBRP muffin, as assessed with numerical and graphical methods, was 84.041 g GBRP, 110.224 g butter, and 80.0 g milk.

• Microbiology and Biotechnology Letters
• /
• v.4 no.4
• /
• pp.131-137
• /
• 1976

Aspergillus niger S-1 was proved to be a good hesperidinase producer which have been selected for naringinase utilization. Enzyme of this strain had good characteristics and purified relative high degree with good recovery by ammonium sulfate or aceton treatment. Results obtained were summarized as follows (1) The enzyme was most active at 60$^{\circ}C$, when the reaction was performed in the pH 4.0 for 30min. Optimum pH for enzyme activity was 5.0 and activity was retained 78％ at pH value 3.5. (2) Hesperidinase activity retained 95％ of its full activity after treatment at 60$^{\circ}C$ for 30min at pH value 4.0., 70％ at 70$^{\circ}C$ and 65％ at 80$^{\circ}C$. Most stable pH of this enzyme was showed 5.0 after treatment for 24hr at 4$^{\circ}C$ (3) Only Magnesium ion activated enzyme reaction, while other metallic ions, Cu$\^$＋＋/, Mn$\^$＋＋/, Pb$\^$＋＋/, Mo$\^$＋＋/, Ag$\^$＋＋/, Hg$\^$＋＋/ inhibited. (4) Eleven fold purification with 35％ recovery was obtained in the case of 60％ aceton treatment and 10-fold purification with 5.6％ recovery was showed with 40％ aceton comparing to the crude extract Enzyme. (5) Crude enzyme precipitated with 0.4-0.6 saturated ammonium sulfate contained 13f6 of the original enzyme activity with 48-fold increase in specific activity and enzyme has been purified 25 fold with a yield 19％ by 0.6-5.8 saturation. (6) Hesperidinase formation was noticeably increased by addition of small amount of orange-peel extraction on the wheat bran medium.

• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.264-274
• /
• 2005

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost which is generally estimated according to rock fragmentation. Therefore it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground levels is provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.16-27
• /
• 2020

This study presented a plan for the establishment of conservation areas and the ecological management of those areas in the stream based on the Marxan with Zones Program for a Jungrangcheon Stream in downtown Seoul. The application of the Marxan with Zones Program included the stage of planning unit setting, application of mapping indices, numerical correction for repetitive analysis, creation of scenario-specific optimizations through analysis, analysis of sensitivity by scenario, review, and the selection of optimal plans among the scenarios considered. As a result of the establishment of a conservation area near Jungrangcheon Stream, which has several watershed areas, including an upper-middle-class wildlife protection zone, which was previously designated and managed as a conservation area, and the migratory protection zone downstream of Jungrangcheon Stream were designated as key conservation areas. A number of wild birds were observed in the upper reaches of Jungrangcheon Stream, adjacent to the forests of Suraksan Mountain and Dobongsan Mountain. The downstream area is a habitat for migratory birds that travel along the stream and the adjacent river ecosystem, including the Hangang River confluence and Cheonggyecheon Stream confluence. Therefore, the upper and lower reaches of Jungrangcheon Stream are connected to forest ecosystems such as Dobongsan Mountain, Suraksan Mountain, and Eungbongsan Mountain, as well as urban green area and river ecosystems in the basin area, which influence the establishment of conservation areas. This study verified the establishment and evaluation of existing conservation areas through the Marxan with Zones Program during the verification of the conservation areas and was presented as in-stream management and basin management method to manage the basin areas derived from core conservation areas determined through the program.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.136-142
• /
• 2013

Optimal condition for pollen germination was suggested as a basic research of flowering physiology in order to identify the characteristics of flowering and seed setting of rare and endangered Forsythia saxatilis Nakai. Pollen samples were collected during flowering time from the end of March to the beginning of April. First, a suitable germination temperature, medium sucrose concentration and germination time were determined for pollen germination and pollen tube elongation in vitro, and then an optimal pH of culture medium. Pollen germination and tube elongation were significantly different among the levels of germination temperature, sucrose concentration and germination time. Interactive effects were observed between germination temperature and time, germination temperature and sucrose concentration, germination time and sucrose concentration. Pollen germination was the highest at $10^{\circ}C$ and increased with the increase of sucrose concentration, whereas it had no relation with germination time. In addition, pollen germination and tube elongation did not increase at more than 15% of sucrose concentration and 24 hours later. Pollen germination was the highest at pH 5 (20.8%) and the lowest at pH 6 (3.8%). In conclusion, $10^{\circ}C$, 15% sucrose and pH 5 were proposed as the optimal condition for pollen germination 24 hours later of pollen culture.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.87-98
• /
• 2005

Through rail transit has many merits as a safe, environmental harmonic and scheduled transit, there are many problems to construct railroads because of the public resentment. However, there is no reasonable way to settle the conflict properly and it causes enormous social and economic losses. This paper suggests a methodology to evaluate public complaint using the AHP technique, which is generally used as the methodology to evaluate public complaint using the AHP technique, which is generally used as the Multi-Criteria Decision Making (MCDM). However, the result from the AHP has some defects to control conflicts because the interests related to railroad projects are so complex that it is hard to make people persuaded easily. Therefore, this paper suggests 'the improvement ranking method', 'the sensitive analysis', and 'the assessment of independence relationship' which can aid the basic AHP to be robust. And the AHP. modified by fuzzy method, is also suggested to apply this methodology to example rail paths in Korea.