• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.281-293
• /
• 2018

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. This study analyzed the overview of BAT reference documents(BREF), BAT setting procedure and method, and then suggested the development direction BAT and BAT-AEL monitoring method of a Electricity and Steam production facility.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.144-155
• /
• 2018

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. In addition, if the facility with BAT works normally, the pollutant emission is offered with the range of lower limit to upper limit. This study analyzed the overview of Best Available Techniques-Associated Emission Levels (BAT-AEL), and its setting procedure and method, and then suggested the BAT-AEL of a waste incineration facility. In comparative analysis on Emission Limit Values (ELVs) of EU, this study tries to propose improvement matters and development directions if the relevant standard is revised.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.29-36
• /
• 2008

최근 자동차 경량화를 위한 부단한 노력이 진행되고 있다. 이 목적에서, HSS (high strength steel)는 전통적인 연강 (mild steel)의 대안으로 널리 사용되고 있다. 본 연구의 목적은 판금의 형단조에 있어서의 공구와 공정설계를 위하여 HSS의 스프링백(springback)을 정확히 예측하기 위한 성공적인 방법론을 추구하고자 함이다. 연구를 위하여 먼저 스프링백의 개념과 그의 측정치들을 설명했으며 U-draw bending 시험을 수행하였다. 시험 결과 및 선정된 파라메터들 중심의 수행평가기준에 근거하여, 주어진 파라메터 조합들을 중심으로 유한요소 해석을 수행하였다. 직교배열을 통하여 스프링백에 대한 인자 효과들을 포괄적으로 분석하였으며 최적 인자 조합들을 도출하였다. 이 과정에서 직교배열상의 한 조합 전체의 데이터가 가용하지 않는 문제가 수반되었으며, 반복적으로 signal-to-noise 비(ratio)를 개선해가는 기법을 적용하여 해결하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.568-570
• /
• 2005

광대역 망에서 범용 TCP를 사용하는 경우 최대 전송 윈도우의 크기가 제한되어 가용한 망 자원이 낭비된다. 이를 해결하는 일반적인 방법은 윈도우 스케일 옵션을 사용하는 것인데 이 경우 송신측의 응용를 수정해야 하는 단점이 있다. 본 논문에서는 이를 해결하기 위하여 송신측을 수정하지 않고 전송 윈도우의 크기를 증가시키는 방법을 제안한다. 이 방법에서는 송수신측 사이에 있는 Snoop 게이트웨이가 망의 상태와 수신측의 처리 능력을 동적으로 파악하여 최적의 윈도우 확대 계수를 결정하고, 이 계수에 상응하는 수의 응답 패킷을 송신측에 전송하여 전송 윈도우 크기가 확대된 효과를 얻는다. 특히, 이 방법은 서로 다른 특성을 갖는 망이 snoop 게이트웨이를 사용하여 2-way 세그먼트 방식으로 연동된 환경에서 부가적인 비용없이 단대단 시맨틱을 유지하면서 성능을 향상시킬 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.701-704
• /
• 2023

본 연구는 반도체 제조 과정에서 생산 가용 능력이 저하되는 시점을 조기 탐지하기 위한 프레임워크를 제안한다. 이를 위해 데이터 패턴의 불규칙한 변동이 잦은 환경에서 모델의 재학습 없이 최적의 성능을 유지할 수 있도록 온라인 학습 방식을 활용하였다. Augmented Dicky-Fuller test 를 통해 데이터의 정상성 여부를 검정하고, 데이터에 변화가 있을 경우 학습 모델은 지속적으로 업데이트된다. 특히, 상한 재공재고는 생산량과 직결되는 주요 지표로써, 낮게 예측된 시점에서 주요 원인 변수를 파악하는 것이 중요하다. 따라서 정확도와 효율성 측면에서 다른 모델 대비 가장 우수한 성능을 보였던 제안 기법에 shapley additive explanations(SHAP)을 적용하여 생산 저하 시 문제가 되는 원인 변수를 분석하고자 하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.82-91
• /
• 2009

Routing (or path selection) is one of the key issues of multi-hop relay networks such as the IEEE 802.16j. Moreover, the allocation of appropriate resource such as bandwidth should not only be made in accordance with the paths selected, but the utilization of radio resource of an entire cell should also be maximized. Due to this interdependency between the problems of resource allocation and routing, it is desired these two problems are addressed simultaneously. In this paper, we propose a joint resource allocation and routing scheme for an OFDMA-based multi-hop cellular system. This scheme uses a polynomial time heuristic algorithm called Multi-Dimensional Multi-choice Knapsack Problem (MMKP) in order to find an approximate solution maximizing the total downlink throughput. In the simulation results, we show that the proposed scheme finds a sub-optimal solution which is superior to a link quality-based routing scheme, but slightly worse than the optimal solution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.185-191
• /
• 2019

During the modern battlefields of multi-batches flight formation attack situation, it is an essential task for a commander to make a proper fire distribution of air defense missile launch platforms for threat targets with effectively and quickly. Pan et al. try to solve this problem using genetic algorithm, but they are fails. This paper gets the initial feasible solution using high threat target first destroying strategy only use 75% available fire of each missile launch platform. Then, the assigned missile is moving to another target in the case of decreasing total threat. As a result of experiment, while the proposed algorithm is polynomial-time complexity greedy algorithm but this can be improve the solution than genetic algorithm.

• Journal of Korean Society on Water Environment
• /
• v.33 no.3
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.325-345
• /
• 2020

Determination of Best available technology (BAT) was suggested to reduce volatile organic compounds (VOCs) in a petrochemical industrial complex, by conducting human health risk, environmental, and economic assessment based on multimedia fugacity model. Fate and distribution of benzene, toluene, ethylbenzene, and xylene (BTEX) was predicted by the multimedia fugacity model, which represent VOCs emitted from the industrial complex in U-city. Media-integrated human health risk assessment and sensitivity analysis were conducted to predict the human health risk of BTEX and identify the critical variable which has adverse effects on human health. Besides, the environmental and economic assessment was conducted to determine the BAT for VOCs reduction. It is concluded that BTEX highly remained in soil media (60%, 61%, 64% and 63%), and xylene has remained as the highest proportion of BTEX in each environment media. From the candidates of BAT, the absorption was excluded due to its high human health risk. Moreover, it is identified that the half-life and exposure coefficient of each exposure route are highly correlated with human health risk by sensitivity analysis. In last, considering environmental and economic assessment, the regenerative thermal oxidation, the regenerative catalytic oxidation, the bio-filtration, the UV oxidation, and the activated carbon adsorption were determined as BAT for reducing VOCs in the petrochemical industrial complex. The suggested BAT determination methodology based on the media-integrated approach can contribute to the application of BAT into the workplace to efficiently manage the discharge facilities and operate an integrated environmental management system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.291-300
• /
• 2013

Typhoon simulation method is widely used to estimate sea surface wind speeds during the typhoon periods. Holland (1980) model has been regarded to provide relatively better results for observed wind data. JTWC or RSMC best track data are available for typhoon modeling, but these data show slightly different because the data generation process are different. In this paper, a Newton-Raphson method is used to solve the two nonlinear equations based on the Holland model that is formed by the two typhoon parameters, i.e. the longest radius of 25 m/s and 15 m/s wind speeds, respectively. The solution is the radius of maximum wind speed which is of importance for typhoon modeling. This method is based on the typhoon wind profile of JMA and it shows that Holland model appears to fit better the characteristics of typhoons on the temporal and spatial changes than that of the other models. In case of using RSMC best track data, the method suggested in this study shows better and more reasonable results for the estimation of radius of maximum wind speed because the consistency of the input data is assured.